mirror of
https://github.com/MHSanaei/3x-ui.git
synced 2026-07-02 10:34:23 +00:00
main
62 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 MHSanaei
|
64c306037f |
feat(wireguard): make client allowedIPs editable with validation
The WireGuard peer address was allocated server-side and shown read-only in the client editor, so changing it required hand-editing the inbound's raw settings JSON (#5715). The backend add/update paths already honored a submitted allowedIPs; only the form withheld it. Make the field editable (comma-separated, empty still auto-assigns) and validate submissions server-side: entries must parse as an IP or CIDR, bare addresses normalize to single-host prefixes, and an address already used by another peer on the inbound is rejected. Closes #5715 |
||
|
MHSanaei
|
d8221a8153 |
fix(sub): bake Host VLESS Route into subscription UUIDs
The Host VLESS Route field was stored and shown in the panel but never applied to any generated subscription (raw, JSON, Clash), so the UUID was emitted unmodified (#5655). Xray reads the route from the UUID's 3rd group (bytes 6-7, net.PortFromBytes) and masks those bytes to zero before authenticating, so a value can be baked into the share/JSON/Clash UUIDs without breaking the user match. A shared applyVlessRoute helper encodes a single 0-65535 value as the 3rd group; empty/invalid/non-UUID input is left unchanged, so legacy data never yields a broken link and no DB migration is needed. The field was wrongly validated as a multi-segment port spec (that form belongs to the separate server-side routing rule). It is now a single value 0-65535, with frontend validation, link-preview parity (genVlessLink/hostToExternalProxyEntry), hint + error translations across all 13 locales, and tests on every path. Closes #5655 |
||
|
nima1024m
|
7a5d6da28c |
fix(xray): clean stale routing references when a balancer or outbound is deleted (#5648)
* feat(xray): reference-cleanup helpers for entity deletion
When an outbound or balancer is deleted on the Xray page, routing rules and
balancers that reference it must be repaired in the same edit, or the saved
config breaks the core: a dangling balancerTag stops Router.Init (whole core
down), a dangling outboundTag black-holes matched traffic at the dispatcher.
Add pure plan*/apply* helpers that compute and apply the cleanup. A rule is
kept when a destination (outboundTag or balancerTag) remains and dropped when
none does. Deleting an outbound cascades: emptying a balancer selector removes
that balancer too, then repairs its rules in one pass against the full removed
set; fallbackTag and dialerProxy references are cleared and observatories
re-synced.
* fix(balancers): clean routing rules referencing a deleted balancer
Deleting a balancer left routing rules pointing at its balancerTag. xray-core's
Router.Init then fails ("balancer <tag> not found"), the core won't restart and
every inbound drops — the saved config passes CheckXrayConfig (JSON shape only),
so it breaks only on the next restart.
The delete confirm now lists the affected rules (modified vs removed) next to
the existing observatory warning and applies planBalancerDeletion's cleanup: a
rule keeps its outboundTag when present, otherwise the whole rule is dropped.
Adds the shared DeletionImpactList and refCleanup strings across all 13 locales.
* fix(outbounds): clean rules, balancer selectors and dialerProxy on outbound delete
Deleting an outbound left routing rules pointing at its outboundTag (matched
traffic black-holed at the dispatcher), plus stale references in balancer
selectors / fallbackTag and other outbounds' dialerProxy.
The delete confirm now shows planOutboundDeletion's impact and applies the
cascade: rules keep a remaining balancerTag (else are dropped), the tag is
pulled from balancer selectors and fallbacks, dialerProxy references are
cleared, and a balancer whose selector is emptied is removed along with its
own now-targetless rules.
* refactor(xray): share one rule classifier across preview and apply
Code review flagged that the keep/drop predicate was transcribed twice — in
ruleImpacts (the delete-modal preview) and in applyCleanup (the mutation) — kept
in sync only by a parity test. Extract a single classifyRule() that both call,
so the preview can never disagree with what apply actually does.
Also harden balancersEmptiedBy to skip tagless balancers: an empty/missing tag
would otherwise enter the removed set as "" and silently drop every other
tagless balancer (only reachable via a hand-edited config, but a silent data
loss). And remove observersRemovedByDeletingBalancer, orphaned once BalancersTab
switched to planBalancerDeletion.
* fix(xray): null-guard reference cleanup against unvalidated configs
The PR review noted that classifyRule and applyCleanup dereferenced rule /
balancer entries directly, while the sibling propagateOutboundTagRename uses
optional chaining — because fetchXrayConfig falls back to the unvalidated parsed
object when Zod validation fails, a stray null in rules / balancers can survive
into the editor and would throw during the delete preview/apply.
Match that defensive style: classifyRule and balancersEmptiedBy read through
optional chaining, the balancer loop skips nullish entries, and the dialerProxy
walk guards the outbound. A delete on a hand-edited config with null entries now
degrades gracefully instead of throwing.
|
||
|
nima1024m
|
71aca2018a |
feat(a11y): screen-reader & keyboard accessibility across the panel (#5486) (#5652)
* feat(a11y): label list, toolbar & dashboard actions for screen readers Phase 1 of #5486 (Android TalkBack support). Icon-only controls across the management surfaces previously announced only their untranslated icon name (e.g. "edit", "ellipsis") or nothing at all. - Add aria-label to icon-only row-action and toolbar buttons across inbounds, clients, groups, hosts, nodes and xray (outbounds/routing/dns/balancers) lists, plus the dashboard cards. - Make clickable bare icons and AntD Card actions keyboard-operable via role/tabIndex + Enter/Space (new activateOnKey helper); convert mobile dropdown triggers to buttons so they open from the keyboard. - Fix the sidebar hamburger's mislabeled aria-label (was the dashboard label) and translate previously-hardcoded outbound menu labels. New i18n keys in all 13 locales: sort, menu.openMenu, pages.xray.outbound.moveToTop. * feat(a11y): label modal, QR and copy/download controls for screen readers Phase 2 of #5486. Modal and overlay controls relied on tooltips (not a reliable accessible name) or were bare clickable icons with no keyboard or screen-reader support. - Add aria-label to copy/QR/download/info icon buttons in the inbound and client info modals, sub-links modal, QR panel, backup/log modals, and to the bare search/select inputs of the attach/detach client modals. - Make click-to-copy QR codes and the IP-log refresh/clear, geofile reload and log refresh icons keyboard-operable (role/tabIndex + Enter/Space) with translated labels. - Label the 2FA code input; drop the QrPanel download-image string fallback now that the key exists. New i18n key in all 13 locales: downloadImage. * feat(a11y): label form fields and shared form components for screen readers Phase 3 of #5486. Form controls and shared form widgets were largely unlabelled, and several remove controls were not keyboard-operable. - SettingListItem now ties its title to the control via aria-labelledby, giving accessible names to the ~90 settings-tab inputs at once. - InputAddon gains button semantics (role/tabIndex/Enter+Space) and an ariaLabel prop when used as an interactive remove control. - Sparkline charts expose a role="img" summary of their latest values. - Add aria-label to add/remove/regenerate icon buttons and bare inputs/selects across inbound, client and xray (dns/routing/balancer/ outbound) forms; make clickable remove icons keyboard-operable; mark decorative help/target icons aria-hidden; label the JSON editor, date-time clear button, header-map remove, notification select-all and remark token chips. New i18n keys in all 13 locales: regenerate, jsonEditor, pages.xray.balancer.{costMatch,costValue,costRegexp}. * chore(a11y): add eslint-plugin-jsx-a11y harness and fix flagged interactions Phase 4 of #5486. Adds eslint-plugin-jsx-a11y (recommended ruleset, scoped to .tsx) so screen-reader/keyboard regressions fail lint. - Make the mobile node-card header a proper keyboard disclosure (role=button, aria-expanded, Enter/Space activation that ignores clicks on the nested action buttons) and drop the now-redundant stop-propagation click handlers the linter flagged on card-action wrappers in the node, client and inbound mobile cards. - Disable jsx-a11y/no-autofocus: the autofocus on the login field and modal primary inputs is intentional focus management that helps screen-reader and keyboard users land on the right control. make lint passes with the a11y ruleset enforced. * feat(a11y): cover remaining deferred spots (settings tabs, sockopt, API docs) Completes the panel sweep for #5486 by labelling the spots previously left out of phases 1-4: - NotifyTimeField (Telegram notifications): the mode, interval, unit and custom-cron inputs now carry aria-labels. - The Sockopt toggle in transport options. - Settings category tabs in icons-only (mobile) mode now expose the tab name as the icon's aria-label instead of the raw icon name. - The Swagger API-docs view is wrapped in a labelled region landmark. New i18n keys in all 13 locales: pages.settings.notifyTime.{interval,unit}. * feat(a11y): label shared xray form components and remark field Code review surfaced frontend/src/lib/xray/forms/ — shared form components used by the host and inbound JSON forms — which the initial audit missed. - FinalMaskForm (TCP/UDP final-mask editor): label the icon-only add and regenerate buttons and make all six remove icons keyboard-operable (role/tabIndex/Enter+Space); adds useTranslation to its sub-components. - CustomSockoptList: the remove icon is now keyboard-operable. - SniffingFields: aria-label on the otherwise label-less destOverride select. - RemarkTemplateField: aria-label on the remark-variable picker button. New i18n key in all 13 locales: pages.inbounds.sniffingDestOverride. * feat(a11y): label client info modal and WireGuard config block After rebasing onto the WireGuard client-config feature, re-apply the ClientInfoModal copy/QR/IP-log aria-labels (the modal was restructured upstream, so the original labels did not carry over) and label the new ConfigBlock component's copy/download/QR actions. ConfigBlock's action wrapper keeps its stop-propagation handler (a non-interactive guard for the Collapse header) under a scoped jsx-a11y exception. * fix(frontend): let npm install jsx-a11y under ESLint 10 eslint-plugin-jsx-a11y@6.10.2 declares a peer range that stops at ESLint 9, but the panel is on ESLint 10, so `npm ci` aborts with ERESOLVE even though the plugin runs fine on ESLint 10 with flat config. Add an npm override so jsx-a11y accepts the project's ESLint version. This keeps normal peer resolution (recharts' react-is peer still auto-installs) — no global legacy-peer-deps and no manual react-is pin needed. * fix(a11y): size mobile row triggers and move node expand role to chevron Address automated review on #5652: - add size="small" to the inbound/client/node mobile-card "more" dropdown triggers so they match the adjacent small Switch and the established desktop RowActions pattern. - move the node card-head disclosure semantics (role/tabIndex/aria-expanded/ keyboard) onto the chevron affordance so the expand control is no longer a role="button" wrapping the Switch, info button and dropdown. Mouse click-anywhere-to-expand is preserved on the header div. |
||
|
MHSanaei
|
6c71b725da |
fix(clients): hide WireGuard config after detaching the WG inbound
The client info and QR modals rendered a WireGuard config whenever the client still carried leftover WG key material (privateKey / publicKey / allowedIPs / preSharedKey / keepAlive), regardless of whether a WireGuard inbound was actually attached. After detaching the WG inbound the config kept showing, built with an empty endpoint port and public key. Gate wgConfigText on an attached WireGuard inbound (wgInbound) being present, not just isWireguardClient(client), in both ClientInfoModal and ClientQrModal. Also rename the i18n key pages.clients.conf -> config and add the missing pages.clients keys (wireguardConfig, config, bulkFlow, bulkFlowNoChange, bulkFlowDisable) to all 12 non-English locales so each one matches en-US. |
||
|
Nikan Zeyaei
|
60c54827aa |
feat: ldap skip tls verify (#5637)
* feat(ldap): add InsecureSkipVerify field and tlsConfig helper Extract the inline TLS config at both LDAPS dial sites (FetchVlessFlags, AuthenticateUser) into a tlsConfig(cfg) helper, and add a new Config.InsecureSkipVerify bool that flows through to tls.Config.InsecureSkipVerify. This unblocks enterprise environments (e.g. Microsoft AD CS with internal CAs) where the server certificate chain cannot be imported into the system trust store. Behavior is identical when InsecureSkipVerify is false (the default) - pure refactor + plumbing. The helper is unit-testable without a live server, which is why it is extracted. Closes https://github.com/MHSanaei/3x-ui/issues/5538 * feat(settings): add LdapInsecureSkipVerify setting Plumb the new LDAP skip-TLS-verify toggle through the settings stack: - AllSetting struct field (json/form tag: ldapInsecureSkipVerify) - defaultValueMap default ("false") - GetLdapInsecureSkipVerify() getter - ldap_sync_job wiring into ldaputil.Config (FetchVlessFlags path) - panel/user.go wiring into ldaputil.Config (AuthenticateUser path; the original issue's file list missed this) Persistence is handled by UpdateAllSetting's reflect loop, matching the existing pattern used by ldapUseTLS (no explicit setter). Closes https://github.com/MHSanaei/3x-ui/issues/5538 * feat(ui): add Skip TLS verification switch in LDAP settings Wire the new ldapInsecureSkipVerify setting into the hand-written frontend model and Zod schema, and render it as a new Switch in GeneralTab right under "Use TLS (LDAPS)". The switch is disabled when TLS is off (the setting is meaningless without LDAPS) and shows an insecure-warning description to make the security implication visible to operators. Also adds a Vitest round-trip test pinning schema acceptance and model default-to-false behavior. Closes https://github.com/MHSanaei/3x-ui/issues/5538 * chore(i18n): add Skip TLS verification strings to all locales Add pages.settings.ldap.skipTlsVerify and skipTlsVerifyDesc to all 13 backend-served translation files, matching the existing repo convention of keeping LDAP keys present in every locale (en-US, fa-IR, ru-RU, zh-CN, zh-TW, pt-BR, ar-EG, uk-UA, id-ID, tr-TR, vi-VN, ja-JP, es-ES). No translation-parity test exists in CI, but every other LDAP key is replicated across all files, so this keeps the invariant intact. Closes https://github.com/MHSanaei/3x-ui/issues/5538 * chore(codegen): regenerate frontend artifacts Regenerate frontend/src/generated/{zod,types,schemas,examples}.ts and frontend/public/openapi.json via `npm run gen` to reflect the new ldapInsecureSkipVerify field. The codegen CI job runs `git diff --exit-code` on these files; failing to commit them would break the build. Closes https://github.com/MHSanaei/3x-ui/issues/5538 |
||
|
nima1024m
|
25a86b9ee2 |
feat(balancers): tabbed Observatory/Burst Observatory form (#5627)
* feat(balancers): tabbed Observatory/Burst form replacing raw JSON Replace the raw JSON editor for the Observatory / Burst Observatory sections with a proper Ant Design form, and split the Balancers page into two sub-tabs: "Balancer Settings" (the existing table) and "Observatory". Observers stay fully auto-managed by balancer strategy through the existing syncObservatories logic: users edit only the tunable probe fields, the subjectSelector is shown read-only since it is derived from the balancers, and deleting the last balancer that needs an observer now warns in the confirm dialog that the observer will be removed too. Overlapping selectors keep an observer alive while any balancer still references it. Also add the previously missing pingConfig.httpMethod field (HEAD/GET) and translations for the new strings across all 13 locales. * refactor(balancers): tighten httpMethod typing and align connectivity default Address automated review feedback on the Observatory form: - Use the ObservatoryHttpMethodSchema enum for pingConfig.httpMethod instead of a free-form z.string(), and drive the HTTP method Select from its options. Removes the previously dead enum export and the duplicate local list, and types the field as 'HEAD' | 'GET'. - Align the schema's connectivity default with DEFAULT_BURST_OBSERVATORY (the hicloud URL) so it matches what burst observers are actually created with. No behavior change. |
||
|
MHSanaei
|
9c8cd08f90 |
feat(wireguard): multi-client support
WireGuard inbounds now manage per-client peers using xray-core's native WireGuard users (AddUser/RemoveUser). Each client lives in settings.clients (canonical, like every other protocol) and is projected to peers[] only when emitting the xray config, at level 0 so the dispatcher's per-user traffic/online counters work with no extra plumbing. Backend: internal/util/wireguard gains KeyToHex (base64 to hex for the gRPC path), PublicKeyFromPrivate and GenerateWireguardPSK; xray/api.go builds a wireguard account in AddUser with hex keys (RemoveUser already worked); client CRUD generates a keypair and allocates a unique tunnel address per client and never rotates keys on edit; an idempotent migration converts legacy settings.peers into managed clients; WireGuard is included in the raw subscription. Frontend: WireGuard in the add-client modal with keys on the credential tab, client schema, per-client QR/link/.conf, inbound form reduced to server settings; i18n added across 13 locales. Fix: guard the settings[clients] assertion in add/update so a legacy WireGuard inbound stored without a clients key no longer panics. |
||
|
MHSanaei
|
9b8a0c9b17 |
feat(groups): reset group traffic without touching client counters
The group page shows traffic counting per group, but the only reset available zeroed every member client's up/down counters (and their quotas) via bulkResetTraffic. Group traffic is a derived sum of client traffic, so zeroing the group display previously required mutating the clients themselves. Add a display-only baseline: ClientGroup gains reset_up/reset_down columns (additive, handled by AutoMigrate). ResetGroupTraffic snapshots the group's current up/down sum into the baseline, and ListGroups now reports max(0, sum - baseline). Client counters are left untouched and no Xray restart is triggered. A new POST /panel/api/clients/groups/ resetTraffic endpoint drives it, creating the client_groups row when the group exists only as a derived label. The groups page action now calls the new endpoint; confirm/success strings updated across all 13 locales to reflect group-only semantics. |
||
|
MHSanaei
|
6964d84742 |
feat(reality): add live REALITY target scanner with IP/CIDR discovery
Replace the static reality-targets list with a server-side TLS 1.3 probe that checks TLS 1.3 + HTTP/2 + X25519 + a trusted certificate. - Single-domain validate auto-fills target and serverNames from the cert SAN - Discovery scans an IP/CIDR without SNI to find new targets from their certificates, deduped and ranked by feasibility then latency, private-IP guarded via netsafe - New endpoints scanRealityTarget and scanRealityTargets with RealityScanResult, plus openapigen and api-docs entries - Add scanner strings to all 13 locales - Replace deprecated AntD Alert message prop with title across the panel |
||
|
MHSanaei
|
451263f1db |
feat(sidebar): add documentation link button
Add a Docs button next to the donate button in the sidebar and mobile drawer linking to https://docs.sanaei.dev/, with menu.docs translations across all 13 languages. |
||
|
MHSanaei
|
9381fa284b |
feat(logs): add auto-update toggle to Access Logs and Logs viewers
A checkbox in both the Xray Access Logs and panel Logs modals polls the existing refresh every 5s while enabled, respecting the current row count, level/filter, and Direct/Blocked/Proxy selections. The poller tears down on close or untoggle. Adds a localized pages.index.autoUpdate key to all 13 locales. |
||
|
MHSanaei
|
e27f2490b2 |
feat(logs): label the Xray access-log viewer 'Access Logs' across all languages
Distinguishes the access-log modal from the panel 'Logs' viewer it shares a title with. Adds the accessLogs key to all 13 translation files. |
||
|
MHSanaei
|
e64e998194 |
feat(clients): add bulk enable/disable and move selection actions into More menu
Add bulkEnable/bulkDisable named endpoints backed by a shared internal impl, and consolidate the per-selection actions (attach, detach, add to group, ungroup, enable, disable, adjust, sub links) into the clients table's More dropdown so the toolbar only shows the selection count and delete. Translate the new enable/disable confirm dialogs and toasts across all 13 locales. |
||
|
MHSanaei
|
e8878b71a4 |
feat(nodes): add Dev channel option to node panel updates
The node update confirm dialog now offers a 'Dev channel (latest commit)' choice. The dev flag threads master -> nodes/updatePanel -> UpdatePanels -> remote.UpdatePanel -> the node's updatePanel endpoint, which calls StartUpdateChannel(dev) to install the rolling dev-latest build. With no dev flag the node keeps following its own channel setting. |
||
|
MHSanaei
|
11c5b53fac | feat(sub): add PROTOCOL, TRANSPORT, SECURITY remark template variables | ||
|
FunLay123
|
3ba43bd86d |
feat(web): vless encryption new modes (#5517)
* feat(web): add vless encryption new modes * feat(web): add translations for vless encryption modes * feat(translation): bring "vlessAuthX25519" and "vlessAuthMlkem768" to general form |
||
|
MHSanaei
|
aad2b3eb1e |
feat(update): add rolling dev update channel for per-commit builds
Adds an opt-in Dev channel so panels running CI per-commit builds can self-update to the latest commit, mirroring the stable online-update flow. CI publishes/overwrites a single fixed-tag pre-release (dev-latest), force-moved to the newest main commit and marked --latest=false so releases/latest stays the stable tag. Builds stamp the short commit via -ldflags; the panel compares the running commit to the dev release commit to detect an update, and update.sh honors XUI_UPDATE_TAG to install from that tag. Linux/systemd only. |
||
|
MHSanaei
|
48c2fb27b8 |
feat(sub): add Incy client integration and routing tab
Add an Incy quick-import button (incy://add) to the Android and iOS app menus on the subscription page, and a new Incy settings tab with routing enable + rules. Incy routing is delivered by injecting an incy://routing/onadd line into the raw subscription body, avoiding a collision with Happ's Routing header. Includes backend settings, regenerated OpenAPI/zod schemas, and translations for all locales. |
||
|
MHSanaei
|
47fd6061b1 | revert languages update | ||
|
Rouzbeh†
|
fea3c94b11 |
feat(xhttp): support sessionID* rename + sessionIDTable/Length (xray v26.6.22) (#5506)
* feat(xhttp): support sessionID* rename + sessionIDTable/Length (xray v26.6.22) xray-core v26.6.22 (PR #6258) renamed the XHTTP session config keys sessionPlacement/sessionKey to sessionIDPlacement/sessionIDKey (no fallback kept in core) and added sessionIDTable (predefined charset name or literal ASCII) and sessionIDLength (range, e.g. 16-32, lower bound > 0). Panel changes: - Schema (xhttp.ts): rename the two keys, add sessionIDTable/sessionIDLength, and a z.preprocess that lifts legacy keys off stored configs so an upgraded panel never silently drops a saved session setting. - Wire normalize + share-link build/parse: rename keys, emit the two new fields, and accept legacy sessionPlacement/sessionKey from old share links. - Inbound + outbound XHTTP forms: rename field paths, add a sessionIDTable autocomplete (9 predefined tables + free ASCII) and a sessionIDLength range input shown only when a table is set, with light client validation (ASCII table, length min > 0; xray enforces the room-size minimum server-side). - Subscription (service.go) and Clash (clash_service.go) builders: emit the renamed + new keys, with a legacy fallback for not-yet-resaved inbounds. - Locales: add sessionIDTable/sessionIDLength labels + hints in all 13 files. Two sibling v26.6.22 XHTTP commits need no panel change and are covered by the core bump alone: #6332 (XHTTP/3 closes QUIC/UDP) and #6320 (udpHop honors the existing dialerProxy). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * test(xhttp): add Session ID Table to inbound form-blocks snapshot The new sessionIDTable input renders by default in the inbound XHTTP form, so its label joins the field-structure snapshot. sessionIDLength stays conditional (only shown when a table is set), so it does not appear here. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(xhttp): migrate legacy session keys in the running xray config The Zod preprocess plus the subscription/Clash fallbacks only covered the panel UI and share-link output. The config handed to the running xray-core process is built from the raw stored streamSettings in GetXrayConfig, which did not rewrite the renamed XHTTP session keys — so a pre-upgrade inbound (or template outbound) stored with a non-default sessionPlacement was emitted unchanged and dropped by xray-core v26.6.22, until the admin re-saved it. Lift sessionPlacement/sessionKey onto sessionIDPlacement/sessionIDKey at config-generation time, in the existing inbound stream-rewrite block (next to the tls/reality/externalProxy handling) and across template outbounds. The lift is idempotent and leaves unchanged configs byte-identical so the hot-reload diff never sees a spurious change. Also tighten validateSessionIDLength to reject an inverted range (e.g. 32-16) in addition to the existing lower-bound > 0 check. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(xray): avoid summed-capacity allocation in mergeSubscriptionOutbounds CodeQL go/allocation-size-overflow flagged the pre-sized make() whose capacity was a sum of three slice lengths. Grow the slice via append on a nil slice instead; same result, no overflow-prone capacity expression. |
||
|
Rouzbeh†
|
b07fad0e69 |
refactor(wireguard): drop removed workers field (xray v26.6.22) (#5509)
* v3.4.0 * refactor(wireguard): drop removed `workers` field (xray v26.6.22) xray-core v26.6.22 (PR #6287) removed the WireGuard `workers` (num_workers) config field; the engine now relies on wireguard-go's internal worker fallback and no longer reads it. Remove it from the panel so it stops emitting a key xray ignores. Removed from the inbound/outbound/outbound-form WireGuard schemas, both WireGuard forms, the outbound form adapter (both directions) and defaults, the two affected tests, and the `workers` label in all 13 locales. Existing configs that still carry workers are simply dropped on parse — no migration needed since the field had no runtime effect. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * Update version --------- Co-authored-by: MHSanaei <ho3ein.sanaei@gmail.com> Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Rouzbeh†
|
a0f4c13dc5 |
fix(sockopt): honor trustedXForwardedFor on gRPC inbounds (xray v26.6.22) (#5503)
* fix(sockopt): honor trustedXForwardedFor on gRPC inbounds xray-core v26.6.22 (commit 711aea4) switched the gRPC server from reading the x-real-ip gRPC metadata to resolving the client IP from X-Forwarded-For via sockopt.trustedXForwardedFor, matching ws/httpupgrade/xhttp. The panel already exposed the trustedXForwardedFor field and wire output, but the per-transport gate (TRUSTED_HEADER_NETWORKS) still omitted grpc. On a gRPC inbound this raised a false "transport does not honor this header" warning and mis-flagged the Cloudflare real-client-IP preset. Add grpc to the gate. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * docs(i18n): note gRPC in trustedXForwardedFor hint (all locales) Follow-up to the gRPC gate fix: the trustedXForwardedForHint tooltip across all 13 locales said the header is honored "only on WebSocket, HTTPUpgrade and XHTTP". xray-core v26.6.22 added gRPC, so list it too. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
MHSanaei
|
ce8b1bed77 |
feat(iplimit): gate IP limit on fail2ban and reset stale limits
Per-client IP limit only enforces where fail2ban is installed, so the panel now reports enforceability and disables the field otherwise: - Add GET /panel/api/server/fail2banStatus (enabled/installed/usable/windows), cached 30s. - ClientFormModal and ClientBulkAddModal disable the IP Limit input when not usable and show a hover tooltip; Windows gets a platform-specific message instead of the bash-menu hint. - One-time migration ResetIpLimitNoFail2ban zeroes existing client limitIp (inbound settings JSON + clients table) on hosts without fail2ban, where the limit never applied. - Drop the recurring '[LimitIP] Fail2Ban is not installed' warning. - Add limitIpFail2banMissing/limitIpFail2banWindows/limitIpDisabled across all 13 locales. |
||
|
MHSanaei
|
718b7e16e1 |
feat(sidebar): move Routing/Outbounds to top-level items with clean URLs
- Move Routing out of the Xray Configs submenu; add Routing and Outbounds as top-level sidebar items below Hosts - Give them their own clean routes (/routing, /outbound) instead of /xray#routing and /xray#outbound, registered in the React router and the Go SPA shell so direct links and refresh work - XrayPage derives the active section from the pathname for those routes - Add menu.routing and menu.outbounds translation keys across all locales |
||
|
MHSanaei
|
f07d092af0 |
Replace '<3' with '❤️' in translations
Replace ASCII heart "<3" with Unicode heart emoji "❤️" in logout strings across translation files to improve visual consistency and rendering. Updated files in internal/web/translation for: ar-EG, en-US, es-ES, fa-IR, id-ID, ja-JP, pt-BR, ru-RU, tr-TR, uk-UA, vi-VN, zh-CN, and zh-TW.
|
||
|
Sanaei
|
679d2e1cca |
fix: resolve a batch of open bug-tagged issues (traffic accounting, share strategy, sub address, CPU) (#5477)
* fix(node): never re-add a node's full counter on reset/restart (#5456, #5476, #5390) When a node's per-client counter dips below the master's stored baseline (node reboot, xray restart, or a reset propagated to the node), the delta accounting clamped delta to the node's whole current counter and re-added it to the master total — double-counting a client's lifetime usage in a single sync and often pushing them over quota. Treat a backward-moving counter as a reset: add 0 and rebaseline to the reported value, so only genuine post-reset usage accrues. Resets also now clear the per-node NodeClientTraffic baseline (ResetClient TrafficByEmail, resetClientTrafficLocked, BulkResetTraffic, resetAllClient TrafficsLocked), mirroring the delete paths. Without this the node's pre-reset cumulative — including traffic it had counted but not yet synced — leaks back onto the master after a reset, which is the 'reset reverts after a while' report. The next sync then takes the clean delta=0 + rebaseline path regardless of node state. Updates TestNodeCounterReset (was _Clamped, now _NoReAdd) to assert rebaseline instead of re-add, and adds TestCentralResetClearsNodeBaseline_NoLeak. * fix(inbound): keep persisted node share strategy on edit (#5375) Opening the edit modal silently reverted shareAddrStrategy from 'node' to 'listen'. The downgrade effect fires before the form settles: availableNodes is an empty placeholder until /nodes/list resolves, and Form.useWatch('protocol') is briefly empty on the first edit render — both transiently make the node option look unavailable, so the effect clobbered the saved value. Gate the downgrade on availableNodesFetched (threaded from useNodesQuery through InboundsPage) and on the protocol watch being settled, so a persisted strategy is only downgraded when the node option is genuinely unavailable. Adds a rerender-based regression test covering the nodes-loading race. * <3 * perf(traffic): skip cross-panel quota subquery when no globals exist (#5392, #5389) disableInvalidClients ran a correlated EXISTS against client_global_traffics on the full client_traffics table every 5s. On a panel no master pushes to, that table is empty so the subquery can never match — yet it forced a full scan that pegged Postgres at 100% CPU on large client counts. Probe the table first and drop the EXISTS branch when it's empty (the common case), and add an idx_client_global_email index so the subquery is an index lookup when globals are present. Cross-panel enforcement is unchanged (TestGlobalUsage_DisablesClient). This also relieves #5389 ('traffic writer queue full' / panel freeze): the heavy query runs inside the serialized traffic write, so a slow DB backs the shared writer queue up until request handlers block. * fix(sub): don't advertise a leaked client IP for local wildcard inbounds (#5425) For a local inbound with no node, no custom share address, and a wildcard/blank listen, resolveInboundAddress fell straight through to the subscriber's request host. Behind NAT/proxy/CDN that Host can be the requesting client's own IP, so the subscription wrote the client's address into the inbound instead of the server's — while the panel's own share link (which doesn't use the request host) stayed correct. Prefer the admin's configured public host (Sub/Web domain) over the raw request host for this last-resort fallback. With no configured host the request host still stands, so existing single-domain setups are unaffected. |
||
|
MHSanaei
|
0b0b6250d6 |
feat(clients): orphan cleanup + export/import via CodeMirror modals
Add three client-management actions to the Clients page More menu:
- Delete unattached clients: removes every client with no inbound
attachment, cascading its traffic rows, IP log, and external links
(POST /clients/delOrphans).
- Export clients: shows the {client, inboundIds} list in a read-only
CodeMirror viewer with copy/download (GET /clients/export returns the
array in the standard envelope).
- Import clients: pastes that JSON into an editable CodeMirror editor,
mirroring Import an Inbound (POST /clients/import takes a { data }
body). Attached clients go through the create-and-attach path; items
with no inboundIds are restored as bare records; existing emails are
never overwritten and are reported as skipped.
Document the new endpoints in api-docs and translate the new strings
into all supported languages.
|
||
|
Sentiago
|
891d3a8759 |
feat(memory): add memory threshold alerts (#5366)
* feat(memory): add memory threshold alerts
Add memory (RAM) threshold alerts following the same architecture as
CPU alerts: CheckMemJob with @every 1m cadence, memoryAlarmWanted gate,
tgMemory/smtpMemory per-subscriber settings (default 80%), EventBusCheckboxes
with inline threshold input, i18n for en-US/ru-RU with English defaults.
# Conflicts:
# internal/web/translation/ar-EG.json
# internal/web/translation/es-ES.json
# internal/web/translation/fa-IR.json
# internal/web/translation/id-ID.json
# internal/web/translation/ja-JP.json
# internal/web/translation/pt-BR.json
# internal/web/translation/ru-RU.json
# internal/web/translation/tr-TR.json
# internal/web/translation/uk-UA.json
# internal/web/translation/vi-VN.json
# internal/web/translation/zh-CN.json
# internal/web/translation/zh-TW.json
* fix: address code review findings for memory alerts
- Remove dead settingService field from CheckMemJob
- Fix cpuThreshold double-emoji in 12 locale files (code prepends 🔴)
- Align TgCpu/TgMemory fields in entity.go
- Add missing SetTgMemory function
* fix: restore settingService in CheckMemJob for consistency with CheckCpuJob
|
||
|
MHSanaei
|
7c8889466b |
feat(tls,reality): port xray TLS/REALITY fields, cert-hash helpers, fallback UX
TLS: add verifyPeerCertByName (vcn) to inbound settings + emit in both share-link generators (frontend + Go sub) and outbound parser; the allowInsecure replacement xray removed after 2026-06-01. Add server-side curvePreferences, masterKeyLog, echSockopt (passthrough + form) at tlsSettings top-level so they survive the panel-only settings strip. REALITY: add limitFallbackUpload/Download (afterBytes/bytesPerSec/burstBytesPerSec) with per-field tooltips, plus masterKeyLog. Verified field names/semantics against pinned xray v1.260327.1 (bytesPerSec=0 disables). Hosts: fix verify_peer_cert_by_name column bool->string (xray expects comma-separated names) with an idempotent, history-gate-free migration (SQLite typeof blank; Postgres ALTER once); emit vcn for hosts/external proxies. Server: add getCertHash (local cert DER SHA-256) and getRemoteCertHash (xray tls ping) endpoints + api-docs; wire pinned-cert field buttons. Drop the meaningless random-hash button. Xray UI: metrics endpoint (listen/tag) config in Basics; import/export for routing rules and outbounds. Fallbacks card: compact empty state, header-aligned actions, responsive labeled grid rows. i18n: add all new keys to every locale; drop unused generateRandomPin. |
||
|
IgorKha
|
ce1d348ece |
feat(sub): add option to hide server settings in subscription (happ) (#5433)
* feat(settings): add option to hide server settings in subscription
* chore: regenerate codegen and add translations for subHideSettings
- Update frontend/src/generated/{types,schemas,zod,examples}.ts to include
subHideSettings (bool) in AllSetting and AllSettingView
- Add subHideSettings / subHideSettingsDesc translation keys to all 11
remaining locales: ar-EG, fa-IR, es-ES, id-ID, ja-JP, pt-BR, uk-UA,
tr-TR, zh-TW, zh-CN, vi-VN
Co-authored-by: IgorKha <IgorKha@users.noreply.github.com>
Co-authored-by: Sanaei <MHSanaei@users.noreply.github.com>
* fix(sub): add subHideSettings default to settings map
Every other sub* setting has an entry in defaultValueMap; subHideSettings was missing, so GetSubHideSettings hit the 'key not in defaultValueMap' error path on a fresh install (only masked by the false fallback in sub.go). Add the default for consistency.
|
||
|
MHSanaei
|
6d9fd4b41b |
fix(sub): {{INBOUND}} = inbound remark, fix {{TRAFFIC_LEFT}} across inbounds (#5443)
Issue 1: the host endpoint remark no longer substitutes the inbound remark
as the config name. {{INBOUND}} always resolves to the inbound's own remark
and {{HOST}} to the host remark, so both can be shown side by side instead
of the host name appearing twice. configName() drops hostRemark entirely;
token help text updated in all locales.
Issue 2: client_traffics.email is globally unique, so a client shared across
several inbounds of one subscription has a single traffic row owned by one
inbound. statsForClient only searched the current inbound's preloaded
ClientStats, missing on every other inbound's link and falling back to
Up=Down=0 -- so {{TRAFFIC_LEFT}} printed the full quota. Build a per-request
email->stats map from all the subscription's inbounds (no extra queries) and
fall back to it.
|
||
|
MHSanaei
|
5038fa1cec | i18n: sync 12 locales with en-US — add missing Hosts/subscription keys | ||
|
Sanaei
|
709b332d17 |
feat(hosts): managed Hosts for per-host subscription link overrides (#5409)
* test(sub): characterize current link output (externalProxy + single-link baselines)
Phase 0 of the Hosts feature. Locks current subscription-link output for the
externalProxy paths (vless/vmess/trojan/ss exact, reality/hysteria by Contains)
so the upcoming ShareEndpoint refactor can be proven behavior-preserving. These
must stay green and unedited through every later phase.
* refactor(sub): unify external-proxy link building behind ShareEndpoint (TDD, snapshot-locked)
Phase 1 of the Hosts feature. Collapse the duplicated externalProxy link
builders (param-form for vless/trojan/ss, object-form for vmess) onto a single
ShareEndpoint abstraction so Phase 4 can add Host-driven links with ~zero new
branching.
Design: an externalProxy-derived endpoint carries the original entry map and
applies it through the UNCHANGED applyExternalProxyTLS{Params,Obj} helpers, so
output is provably byte-identical. buildExternalProxyURLLinks /
buildVmessExternalProxyLinks become thin adapters; the genVless/Trojan/SS/Vmess
call sites are untouched. genHysteriaLink is deliberately left on its own path
(hex pinSHA256, not pcs). The no-externalProxy default tails are unchanged.
TDD: N1-N4 (externalProxyToEndpoint, inboundDefaultEndpoint, buildEndpointLinks,
buildEndpointVmessLinks) written failing-first against stubs, then implemented.
Mutation sanity (performed + reverted): dropping the ep-carry in
externalProxyToEndpoint makes the Phase-0 C1/C2 characterization snapshots go
red (TLS overrides vanish), proving the snapshots guard the emitted output.
Gate: go test ./internal/sub/... and go test ./... green with ZERO edits to the
Phase-0 snapshots; go build ./... green on linux and windows; go vet clean.
* feat(model): Host entity + automigrate + openapi codegen (TDD)
Phase 2 of the Hosts feature. Adds the Host GORM model: an override endpoint
attached to an inbound (address/port + TLS/transport/clash overrides + sub
scoping), superseding the legacy externalProxy array functionally while leaving
it intact.
- model.Host with snake_case column tags, json serializer for slices, text for
free-JSON (mux/sockopt/xhttp), validate tags (remark 1-40, port 0-65535,
security + mihomoIpVersion enums); TableName "hosts". NodeGuids column is added
now but unused (host->node scoping deferred to v2).
- Registered in BOTH initModels() (db.go) and migrationModels() (migrate_data.go);
the latter is required for cross-DB migration and is easy to miss. PG sequence
resync iterates the initModels slice, so it is covered automatically.
- pruneOrphanedHosts() deletes hosts whose inbound_id has no inbound, called
alongside pruneOrphanedClientInbounds().
- openapigen manifest: Host added to StructAllow with MuxParams/SockoptParams/
XhttpExtraParams -> KindAny; regenerated frontend/src/generated/* + openapi.json.
TDD: TestHostTableName, TestHostValidation, TestHostAutoMigrateCreatesColumns
(+ _Postgres), TestPruneOrphanedHosts written failing-first against a wrong-name,
untagged, unregistered stub, then implemented.
Gate: go test ./... green on SQLite AND a real Postgres DSN (local container);
go build/vet/gofmt clean; npm run gen succeeds with the new Host type/schema/
example/zod; npm run typecheck + npm run test (542) green.
* feat(api): Host CRUD service + controller + routes (TDD)
Phase 3 of the Hosts feature.
- service/host.go (HostService, empty struct + database.GetDB() like
ClientService): GetHosts, GetHostsByInbound, GetHost, AddHost (verifies the
inbound exists — no hard FK), UpdateHost (inbound + sort order immutable here),
DeleteHost, SetHostEnable, SetHostsEnable, DeleteHosts, ReorderHosts (single
driver-safe transaction), GetAllTags.
- controller/host.go mirrors NodeController: routes under /panel/api/hosts
(list/get/byInbound/tags + add/update/del/setEnable/reorder + bulk/setEnable,
bulk/del), binds via middleware.BindAndValidate so the model validate tags are
enforced, {success,msg,obj} envelopes.
- Wired the hosts group into api.go after nodes (inherits checkAPIAuth + CSRF).
- DelInbound now cascades: deleting an inbound deletes its hosts.
- Documented all 11 routes in api-docs endpoints.ts (referencing the generated
Host schema) and regenerated openapi.json; extended TestAPIRoutesDocumented's
controller->basePath switch for host.go. Backend en toast keys added.
TDD: service tests (Add/GetByInbound, RejectsUnknownInbound, Reorder, Set/Bulk
enable, DeleteHosts, DeleteInboundCascadesHosts, GetAllTags) written failing-
first against a nil-returning stub; controller test (AddListGetDelete envelope
round-trip + AuthInherited 401) added.
Gate: go test ./internal/web/... + go test ./... green; npm run gen + typecheck
+ lint + test (542) + build green.
* feat(sub): render subscription links from hosts; legacy fallback when none (TDD, mutation-checked)
Phase 4 of the Hosts feature. Inserts host resolution between inbound and link
across all three subscription formats.
Mechanism: hostEndpoints(inbound, format) loads the inbound's enabled hosts
(filtered by ExcludeFromSubTypes, ordered by sort_order then id) and projects
each onto the externalProxy entry shape the raw/json/clash renderers already
consume. So a host fans out one link/proxy reusing the exact existing rendering
(address/port/security/sni/fp/alpn/pins/ech) with zero new TLS code. Host header
and path overrides are applied additively in the raw builders (no-op for legacy
externalProxy, which never carries those keys — characterization snapshots stay
green). Clash ip-version (MihomoIpVersion) is set last on the proxy.
Integration points:
- getSubs (raw): per inbound, hostEndpoints AFTER projectThroughFallbackMaster;
len>0 -> linkFromHosts (renders only the hosts), else legacy GetLink.
- GetJson/GetClash: inject the host endpoints into the inbound's externalProxy
before the existing getConfig/getProxies loop.
- Precedence: hosts win over any legacy externalProxy (injection replaces it).
Backward compat: a zero-host inbound takes the legacy path -> byte-identical
output (all Phase-0 characterization snapshots unchanged).
TDD: 9 cycles (zero-hosts identical, N-links-ordered with host/path override,
disabled skipped, host-vs-externalProxy precedence, no-dedup, sort composes with
SubSortIndex, host-over-fallback, resolve-via-client-inbounds, ExcludeFromSubTypes
per format) written failing-first against unwired helpers, then wired green.
Mutation sanity (performed + reverted, documented here):
- zero-hosts fallback: flipping the len(hostEps)>0 guard to >=0 makes
TestSub_ZeroHosts_IdenticalOutput go red (host path yields "" for no hosts).
- no-dedup: adding a remark-dedup in hostEndpoints makes TestSub_NHosts_NoDedup
go red (two distinct hosts collapse to one link).
Gate: go test ./internal/sub/... + go test ./... green with ZERO edits to the
Phase-0 snapshots; go build green on linux and windows; go vet + gofmt clean.
* feat(migration): seed hosts from inbound externalProxy (TDD, idempotent, dual-driver)
Phase 5 of the Hosts feature. One-time migration so existing installs surface
their legacy externalProxy entries as first-class Host rows.
- seedHostsFromExternalProxy() is self-gated on a HistoryOfSeeders
"HostsFromExternalProxy" row (run-once) and wired into runSeeders. For each
inbound it parses StreamSettings, reads externalProxy[], and creates one Host
per entry: forceTls->Security (unknown->same), dest->Address, port->Port,
remark->Remark (generated when blank, capped at 40), sni/fingerprint/alpn/
pinnedPeerCertSha256/echConfigList copied; SortOrder=index; InboundId set.
- Additive: externalProxy is left intact in StreamSettings (rollback-safe; the
sub layer prefers hosts when present, §Phase 4).
- Postgres: GORM db.Create advances hosts_id_seq via the sequence, so no extra
resync is needed beyond the existing startup resync.
TDD: field-mapping, idempotency (second run no-op), no-externalProxy->no-hosts,
externalProxy-kept-intact written failing-first against a stub; plus a
Postgres counterpart that skips without XUI_DB_DSN.
Gate: go test ./internal/web/service/... ./internal/database/... green on SQLite;
the *_Postgres tests green against a real Postgres container; go build green on
linux and windows; go vet + gofmt clean. (Running the whole database package
under XUI_DB_TYPE=postgres is not supported — the SQLite-path tests share the one
DSN — so only the t.Skip-gated *_Postgres tests run with the env set.)
* feat(ui): Hosts page + schema + query hooks + link preview helper (TDD on schema/helpers)
Phase 6 of the Hosts feature — the admin UI.
- schemas/api/host.ts: HostFormSchema (validation: remark 1-40, tags ^[A-Z0-9_:]+$
≤10×≤36, port 0-65535, security/mihomoIpVersion enums, alpn/fingerprint reused
from the shared primitives) + a loose HostRecordSchema/HostListSchema for reads.
- lib/hosts/host-link.ts: hostToExternalProxyEntry — the frontend mirror of the
backend hostToExternalProxyMap (security->forceTls, sni override rules, port
inherit), for share-link previews.
- api/queries/useHostsQuery.ts + useHostMutations.ts (mirror the node hooks):
list/get + add/update/del/setEnable/reorder/bulk; queryKeys.hosts.* added;
mutations invalidate keys.hosts.root().
- pages/hosts/{HostsPage,HostList,HostFormModal}.tsx (+CSS) mirroring pages/nodes:
list with remark · address:port · inbound · security · tags · enable Switch ·
per-inbound move up/down (reorder) · bulk enable/disable/delete; form grouped
into Basic / Advanced / Clash / Subscription-scope sections.
- Route '/hosts' + sidebar item (Global icon); menu.hosts + pages.hosts.* added to
the en-US bundle (other locales fall back to English until translated).
TDD: HostFormSchema (10 cases) and hostToExternalProxyEntry (6 cases) written
failing-first, then implemented. UI verified by lint/typecheck/test/build.
Deferred (documented enhancement): the live in-form share-link preview (needs
inbound+client context) and a per-host host/path override in JSON/Clash output
(raw already overrides; JSON/Clash inherit the inbound's host/path).
Gate: cd frontend && npm run lint && npm run typecheck && npm run test (557) &&
npm run build all green; go build ./... + go test ./... still green.
* refactor(ui): remove the External Proxy form from the inbound stream settings
Hosts supersede the legacy externalProxy: the subscription renders from hosts
(hosts win when both exist) and the migration converts existing externalProxy
entries to hosts. externalProxy's only real consumers were the subscription
(now covered) and this form's preview — the backend per-client copy-link never
used it — so removing the editor has no functional regression.
- Drop ExternalProxyForm + toggleExternalProxy from InboundFormModal and delete
the orphaned form component + its export; remove its block test + snapshot.
- KEEP the externalProxy schema field and backend parsing/link-generation: an
existing inbound's externalProxy still round-trips through the form (not
silently destroyed on edit) and still renders if a host was removed.
Gate: cd frontend && npm run typecheck + lint + test (556) + build green.
* fix(ui): use Alert `title` instead of deprecated `message` (antd 6)
Ant Design 6 deprecated <Alert message=> in favor of <Alert title=>; the panel
was mid-migration (21 Alerts already on title). Renamed the 7 remaining stragglers
across 5 files (SubLinksModal, InboundFormModal, sockopt, EmailTab, TelegramTab),
silencing the runtime deprecation warning. description= is unchanged.
Pre-existing warning, surfaced while testing Hosts — not introduced by it.
Gate: npm run typecheck + lint + test (556) + build green.
* style(ui): align Hosts page with Clients/Inbounds cards + reorder columns
- page-shell.css never listed .hosts-page, so the Hosts page got no content
padding / transparent-layout / summary-card spacing. Add a .hosts-page shell
block (background, dark/ultra vars, content-area + summary-card padding). This
is the actual "card spacing" bug.
- HostList: match the Clients/Inbounds list card — hoverable + the toolbar moved
into the card title as a .card-toolbar (Add when nothing selected; selected
count + bulk enable/disable/delete on selection). Re-declare .card-toolbar in
HostList.css since the shared rule lives in a lazily-loaded page stylesheet.
- Reorder table columns as requested: Actions, Enable, then Remark, Endpoint,
Inbound, Security, Tags. Added scroll x for narrow screens.
- HostsPage: add a summary card (Total / Enabled / Disabled) like the other
pages. New i18n keys: pages.hosts.selectedCount + pages.hosts.summary.*.
Gate: npm run typecheck + lint + test (556) + build green.
* style(ui): use Tabs instead of Collapse in the Add/Edit Host form
The Basic / Advanced / Clash / Subscription-scope sections are now tabs. Each
pane sets forceRender so all fields stay mounted — required because the form
uses preserve=false, so an unmounted tab's values would otherwise be dropped on
submit (and a required field on a hidden tab still blocks submit).
Gate: npm run typecheck + lint + test (556) + build green.
* style(ui): split Host form into Security + Advanced tabs; drop unused JSON fields
- Remove the Mux/Sockopt/XHTTP raw-JSON fields from the Host form: they were not
wired into link generation and the inbound's structured editors are inbound-
specific (not reusable). The DB columns + read schema + generated type stay, so
they can get proper editors later. (HostFormSchema drops them; HostRecordSchema
keeps them.)
- Reorganize tabs to Basic / Security / Advanced / Clash / Subscription scope:
Security holds the TLS/cert fields (security, sni, sni-overrides, alpn,
fingerprint, pins, verify-by-name, ech); Advanced now holds the transport
overrides (host header, path).
- i18n: add pages.hosts.sections.security; drop the 3 unused field labels.
Gate: npm run typecheck + lint + test (556) + build green.
* style(ui): restore Mux/Sockopt/XHTTP fields in the Host Advanced tab
Put the three free-JSON override fields back, in the Advanced tab next to host
header / path (as JSON inputs — the inbound's structured editors aren't reusable
here). Re-added to HostFormSchema + defaults + the i18n labels.
Gate: npm run typecheck + lint + test (556) + build green.
* feat(hosts): add allowInsecure (rendered) + serverDescription/mihomoX25519/vlessRouteId fields
Closes most of the Remnawave-host gap analysis.
- model.Host: + allowInsecure, serverDescription (≤64), vlessRouteId (0-65535),
mihomoX25519. Auto-migrated (SQLite + Postgres verified); openapi regenerated.
- allowInsecure is fully RENDERED into subscription output (TDD):
- raw link: allowInsecure=1 (TLS/Reality, skipped for none) via the endpoint
builder;
- JSON/Clash: applyExternalProxyTLSToStream writes tlsSettings.settings.
allowInsecure, and clash applySecurity now emits skip-cert-verify for the tls
case (it previously only did so for Hysteria — a pre-existing gap, so inbound
allowInsecure now renders for vless/trojan/ss clash too).
- Frontend: the four fields added to the Host form (allowInsecure → Security,
serverDescription → Basic, vlessRouteId → Advanced, mihomoX25519 → Clash);
serverDescription shown under the remark in the list. Schema + i18n updated.
serverDescription / vlessRouteId / mihomoX25519 are stored + editable; their
deeper rendering (and per-host mux/sockopt/xhttp into JSON/Clash, plus a per-host
xray JSON template) are tracked as follow-ups.
Gate: go test ./... green (SQLite + Postgres for the host schema/migration);
go build linux+windows; go vet + gofmt clean; npm run gen + typecheck + lint +
test (556) + build green; generated files in sync.
* feat(sub): render host sockopt + xhttp-extra params into JSON/Clash output (TDD)
A host's sockoptParams and xhttpExtraParams (free-JSON) now take effect:
applyHostStreamOverrides injects sockopt into the per-host stream (re-added since
the base stream strips it) and merges xhttpExtraParams into xhttpSettings, called
in both getConfig (JSON) and getProxies (Clash) right after the per-host TLS
apply. No-op for legacy externalProxy entries (keys absent) — characterization
snapshots unchanged.
mux rendering is outbound-level (overrides outbound.Mux) and needs a genVless/
genVnext/genServer signature change — deferred, along with the per-host xray
JSON template.
Gate: go test ./internal/sub/... + go test ./... green (snapshots unchanged);
go build + vet + gofmt clean.
* feat(sub): render host muxParams as a per-host JSON outbound mux override (TDD)
genVnext/genVless/genServer take a muxOverride: a host's muxParams (when valid
JSON) overrides the global mux on its JSON outbound; empty falls back to the
panel mux (behavior unchanged for non-host configs). Completes the host
mux/sockopt/xhttp trio. Test call sites updated for the new signature.
Gate: go test ./internal/sub/... + go test ./... green (snapshots unchanged);
go build + gofmt clean.
* style(ui): show Host security fields conditionally per security (like externalProxy)
* feat(sub): apply host SNI + fingerprint override for reality (TDD)
A reality host now overrides SNI and fingerprint while inheriting publicKey/
shortId from the inbound (reality keys can't be host-supplied). Previously the
reality link kept the inbound's serverName because the TLS appliers are gated to
security=="tls".
- raw: applyEndpointRealityParams sets sni/fp on the params for reality;
- JSON/Clash: applyHostStreamOverrides sets realitySettings.serverName +
serverNames from the host SNI.
Gated to host endpoints via an isHost marker on the synthesized ep, so the legacy
externalProxy path stays byte-identical (characterization snapshots unchanged).
The marker is internal and never emitted.
Gate: go test ./internal/sub/... + go test ./... green; go build + vet + gofmt clean.
* fix(ui): start the Host inbound select unselected instead of showing 0
A new host left inboundId defaulting to 0, so the Select rendered "0". inboundId
is now optional in the form (undefined until chosen), so it shows its
placeholder ("Select an inbound"); the required rule still enforces a choice on
save. Port keeps 0 (means "inherit the inbound's port").
Gate: npm run typecheck + lint + build green.
* fix(ui): drop redundant :port suffix from the Host inbound select label
The inbound tag (e.g. in-59303-tcp) already carries the port, so the appended
":59303" was duplicated. Show just the remark/tag.
Gate: npm run typecheck + lint + build green.
* style(ui): apply the shared card hover shadows to the Hosts page
page-cards.css scoped its card styling + hover shadows to each page class but
not .hosts-page, so Hosts fell back to antd's default hoverable (a larger/blurry
shadow + pointer cursor). Add a .hosts-page block matching the other pages.
Gate: npm run build green.
* feat(hosts): move Tags to Basic tab, add Nodes field, accept VLESS route ranges
- Move the Tags field into the Host form's Basic tab and add a Nodes
multi-select (visual-only assignment, backed by the existing node_guids
column) so the Basic tab matches the reference layout.
- Replace the single-port vlessRouteId integer with a free-form vlessRoute
string that accepts comma-separated ports/ranges (e.g. 53,443,1000-2000);
format-validated on the frontend, stored verbatim on the backend.
- Regenerated frontend types/openapi from the changed model.
* feat(hosts): structured editors for Mux/Sockopt/XHTTP + new Final Mask
Replace the raw JSON textareas in the Host form's Advanced tab with the same
structured editors used elsewhere, under a nested tabbed layout (General / Mux /
Sockopt / XHTTP / Final Mask), mirroring the Sub-JSON settings tab:
- Mux: the Sub-JSON mux editor (enable + concurrency/xudpConcurrency/xudp443).
- Sockopt + XHTTP: reuse the outbound SockoptForm / XhttpForm, wrapped in an
isolated form that serializes the edited subtree back to the host's JSON
string (pruned so the override stays sparse).
- Final Mask: new host field (model + column + JSON-render wiring that merges
the masks into the host's JSON-subscription stream), edited via the shared
FinalMaskForm like the Sub-JSON Final Mask editor.
Each editor stays a controlled value/onChange component bound to its existing
host JSON string field; backend rendering of mux/sockopt/xhttp is unchanged.
* feat(hosts): drop XHTTP + Xray-JSON-template overrides; fix mobile form layout
Remove the host's XHTTP extra-params and Xray-JSON-template overrides entirely
(model fields + columns, JSON-subscription render paths incl. hostTemplateOutbound,
schema, form tab/field, i18n, openapi codegen, and their tests) — they did not
fit the host model. Mux, Sockopt and Final Mask stay as structured editors.
Mobile fixes for the Edit Host modal:
- responsive width (95vw on mobile, was a fixed 760px that overflowed the
viewport and clipped the tabs/labels) + a scrollable body so the footer stays
on screen;
- Mux fields use responsive Row/Col (stack on mobile) instead of a fixed-width
label grid.
* fix(hosts): hide the spurious horizontal scrollbar in the Edit Host modal
Setting overflowY:auto on the modal body forced overflow-x to auto too (CSS
rule), so antd Row's negative gutter margins triggered a horizontal scrollbar.
Pin overflowX:hidden.
* feat(hosts): inbound-style responsive field layout + icon empty state
- Host form (main form + Mux/Sockopt/Final Mask editors) now use the inbound
form's label layout: label beside the input on desktop (labelCol sm span 8 /
wrapperCol sm span 14, right-aligned), stacked label-above-input on mobile.
Rewrote HostMuxForm onto an internal antd Form so it follows the same layout
instead of a manual grid.
- Empty hosts table now shows the host icon + the shared 'Nothing here yet'
(noData) text, matching Nodes/Inbounds/Clients, replacing the bespoke
'No hosts yet…' string.
* fix(hosts): avoid nested <form> in the Edit Host modal
The Mux/Sockopt/Final Mask editors each render their own antd Form inside the
host's main Form, producing an invalid nested <form> DOM node (hydration
warning). Render those inner forms with component={false} so they keep the form
instance/context but emit no <form> element.
* fix(hosts): make the Mux enable toggle work
The Switch's checked state came from Form.useWatch('mux'), but the mux object
field had no registered Form.Item while disabled, so setFieldValue never
notified the watcher and the toggle stayed off. Bind the Switch to a real
name='enabled' field (antd drives its checked state directly) and keep the
sub-fields registered via hidden={!enabled}, serialized to the flat mux JSON.
* refactor(hosts): reuse the outbound MuxForm instead of a bespoke Mux editor
The Mux fields duplicated the outbound MuxForm. Reuse it through the same
wrapper as Sockopt: generalize OutboundSubtreeJsonForm with defaultSubtree
(pre-fill on enable) and a serialize hook, and have HostMuxForm render MuxForm
at the ['mux'] path. The host keeps its inherit-when-off semantics by storing ''
unless mux.enabled. Also drops the now-unused enableSwitch path from the
wrapper (only the removed XHTTP editor used it).
* style(hosts): use default-width Port input like the inbound form
The host Port used width:100% (full width); the inbound's numeric inputs use
antd's default width. Drop the override so Port matches. The Mux number inputs
already use the default width via the reused MuxForm.
* refactor(sockopt): readable customSockopt editor as a shared component
The customSockopt rows were a single cramped Space.Compact line and duplicated
verbatim in the inbound and outbound sockopt forms. Extract a shared
CustomSockoptList that renders each entry as a titled group of labeled fields
(System / Level / Opt / Type / Value), matching the rest of the form, and use it
in both (and thus the host Sockopt editor).
* fix(finalmask): drop the empty Custom Tables tag on a new sudoku mask
The sudoku TCP-mask default seeded customTables: [''] (one empty string), which
rendered as a blank removable tag. Seed [] instead.
* fix(sockopt): make the outbound (and host) Sockopt client-only
Per the XTLS sockopt docs, tproxy / acceptProxyProtocol / V6Only /
trustedXForwardedFor only apply to an inbound (listening socket); they are
meaningless on an outbound/dialer. Drop them from the outbound SockoptForm
(which the host reuses). The Sockopt default object still seeds those keys, so
the host also strips them on serialize, keeping its override honest to the
server/client split. The inbound SockoptForm is left unchanged.
* fix(sockopt): make the inbound Sockopt server-only
Complete the server/client split: drop the outbound/dialer-only fields from the
inbound SockoptForm — dialerProxy, domainStrategy, interface, addressPortStrategy,
happyEyeballs, tcpMptcp (client-only since Go 1.24 auto-enables MPTCP on listen).
mark stays (xray applies SO_MARK on inbound sockets too). Update the form-blocks
snapshot to the server-side field set (intentional spec change).
* feat(hosts): populate Sockopt dialerProxy with the panel's outbound tags
The host Sockopt editor reused the outbound SockoptForm with outboundTags=[],
so the dialerProxy dropdown was empty. Feed it the panel's outbound tags via
the existing useOutboundTags hook (shares the cached xray-config query;
blackhole excluded), so a host can chain through a subscription outbound by tag.
* fix(hosts): empty-state styling on direct load + exclude balancers from dialerProxy
- .card-empty was only defined in lazily-loaded Clients/Inbounds/Nodes
stylesheets, so a direct /hosts refresh rendered the empty table state
unstyled (faint + uncentered) until another page was visited. Re-declare it
in HostList.css so it's correct on first load.
- The Sockopt dialerProxy dropdown listed balancer tags (useOutboundTags merges
them in for mtproto egress). dialerProxy chains a single outbound, so balancers
aren't valid — switch to useOutboundTagGroups and use only the outbound group.
* fix(outbounds): icon + 'Nothing here yet' empty state; stop fading other pages
The Outbounds empty state was a faint '—', and OutboundsTab.css set the global
.card-empty to opacity:0.4 — which leaked onto whichever page's empty state was
shown after the Outbounds CSS had loaded (e.g. Hosts went faint after visiting
Outbounds). Render the icon + noData ('Nothing here yet') like the other lists,
and align .card-empty to the shared centered/secondary style (no opacity).
* fix(outbounds): custom empty state on the desktop table too
The desktop Outbounds Table had no locale.emptyText, so it showed antd's
default 'No data' box. Add the same ExportOutlined + noData empty state as the
card (mobile) view.
* style(sidebar): use ExportOutlined for the Outbounds nav item
The Outbounds sidebar item used UploadOutlined (an upload tray). Switch to
ExportOutlined, matching the outbound icon now used in the routing target and
the outbounds empty states.
* feat(hosts): icons on the form tabs (icon-only on mobile)
Wrap every Host form tab label (Basic/Security/Advanced/Clash/Subscription
scope and the nested General/Mux/Sockopt/Final Mask) with catTabLabel, so the
tabs show icon + text on desktop and just the icon (with a tooltip) on mobile,
matching the Settings/Xray tab bars.
* refactor(hosts): fold Exclude-from-formats into Advanced, drop the one-field tab
The Subscription scope tab held only excludeFromSubTypes after Tags moved to
Basic — a niche per-format scoping knob. Move it into the Advanced > General
sub-tab and remove the standalone tab (and its now-unused subScope label/icon).
* feat(sub): per-client remark template variables; drop the remark model & Show Usage Info
* fix(migration): cap seeded host remark at the model's 256-char limit, not 40
|
||
|
Sanaei
|
37c5e0bfd2 |
feat(node): node hardening — mTLS, hashed+zstd reconcile transport, per-node net metrics (#5382)
* fix(api-docs): document clientIpsByGuid route
Restores a green `go test ./...` baseline: TestAPIRoutesDocumented
flagged POST /panel/api/clients/clientIpsByGuid (added in
|
||
|
MHSanaei
|
d882d6aa74 |
feat(inbounds): add Real client IP presets to capture visitor IP behind CDN/relay
Surface the existing sockopt knobs (acceptProxyProtocol, trustedXForwardedFor) as a guided 'Real client IP' preset selector in the inbound form, so the real visitor IP is recovered behind Cloudflare CDN or an L4 tunnel/relay instead of recording the intermediary address. Presets are mutually exclusive, warn on incompatible transports, and add tooltips, docs, and translations for all locales. |
||
|
Sentiago
|
eec030f86f |
feat(notifications): event bus architecture with Telegram and SMTP subscribers (#5326)
* feat(notifications): event bus architecture with Telegram and SMTP subscribers
- Event bus core with buffered channel, fan-out, panic recovery
- Telegram subscriber with HTML formatting and rate limiting
- Email subscriber with SMTP/TLS/STARTTLS support and stage diagnostics
- 5 event types: outbound.down/up, xray.crash, cpu.high, login.attempt
- CPU threshold checks per subscriber (tgCpu for TG, smtpCpu for Email)
- SystemMetricData struct for raw metric values in events
- i18n keys for en-US, ru-RU, and English defaults for other locales
* fix
* fix(notifications): repair crash/CPU alerts, harden secrets, add node alerts
Bug fixes:
- Xray crash notifications were permanently suppressed after the first crash:
XrayStateTracker latched state="down" with no reset and no recovery event,
so only the first crash per process lifetime ever notified. Removed the
tracker; the existing 1/min rate limiter already dedupes crash-loop spam.
- Email CPU alerts could never fire unless Telegram was also enabled, because
the CPU job was registered only inside the tgbot block. Register it whenever
either Telegram or SMTP wants cpu.high (new cpuAlarmWanted gate) and relax
the cadence to @every 1m (cpu.Percent already samples over a full minute).
- SMTP password (and, pre-existing, all other secrets) were shipped to the
browser in plaintext: GetAllSettingView was dead code and /setting/all
returned the raw model. Wire getAllSetting -> GetAllSettingView, redact
smtpPassword with a hasSmtpPassword presence flag, and preserve it on blank
save. Closes the leak for tgBotToken/ldapPassword/2FA token too.
Polish:
- email Send: use nil SMTP auth when no credentials (Go refuses PlainAuth over
the unencrypted "none" transport).
- Remove unused EventClientDepleted; fix inaccurate bus.go doc comments; drop
stale tgBotLoginNotify from the frontend schema; gofmt alignment.
Feature - node online/offline alerts:
- Emit node.down/node.up from the heartbeat job on a real status transition
(with a startup-spam guard), reusing NodeHealthData. Formatted by both the
Telegram and email subscribers and selectable in the settings UI.
Regenerated frontend types (hasSmtpPassword). New i18n keys added to en-US;
other locales fall back to English (bundle default) until translated.
* fix(settings): use antd Space orientation instead of deprecated direction
Ant Design 6 deprecated Space's `direction` prop in favor of `orientation`,
which logged a console warning from the Telegram/Email notification tabs. Brings
these two tabs in line with the rest of the codebase, which already uses
`orientation`.
* i18n(notifications): translate the notification feature into all locales
The notifications PR shipped ~99 new strings (SMTP settings, event labels,
Telegram/email message templates) as English placeholders in every non-English
locale. Translate them — plus the node-alert keys added during this review —
into all 12 locales: Arabic, Spanish, Persian, Indonesian, Japanese,
Portuguese-BR, Russian, Turkish, Ukrainian, Vietnamese, and Simplified/
Traditional Chinese.
Go-template placeholders ({{ .Tag }}, {{ .Name }}, etc.) are preserved exactly;
tgbot message values carry no leading status emoji (the bot/email code adds
those, so an emoji in the value would duplicate it); product/protocol names
(SMTP, STARTTLS, TLS, CPU, Xray, Telegram) are kept as-is.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
|
||
|
Nikan Zeyaei
|
05ad7f417c |
feat(node): per node outbound routing (#5275)
* feat: add per-node outbound routing for panel-to-node connections * feat(ui): add outbound tag selector to node form with i18n * fix(xray): avoid potential overflow warning in node egress rule allocation * chore: run "npm run gen" * fix --------- Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com> |
||
|
Nikan Zeyaei
|
f4bbaf40f0 |
feat(ui): show per-inbound live speed (#5261)
* feat(utils): add speedFormat utility and tests * feat(inbounds): add InboundSpeedEntry type * feat(inbounds): add speed column to inbound list * feat(inbounds): show speed in inbound stats modal * feat(inbounds): compute inbound speed from traffic deltas * feat(inbounds): wire inbound speed through page * feat(i18n): add speed translation for all locales * refactor(inbounds): dedupe live-speed UI and harden formatting Extract a shared InboundSpeedTag component and isActiveSpeed guard used by the speed column and stats modal, unify InboundSpeedEntry into a single type, and route speedFormat through sizeFormat. Also guard sizeFormat against non-finite input (no more "NaN PB/s") and clear stale per-inbound speeds when a traffic poll returns no deltas. --------- Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com> |
||
|
MHSanaei
|
dcb923b4a1 |
feat(sub): per-client external links and remote subscriptions
Add a Links tab to the client form for attaching third-party share links and remote subscription URLs per client. They are merged into the client's raw/JSON/Clash subscription output: links are emitted verbatim and parsed for JSON/Clash; subscription URLs are fetched (cached, with a short timeout) and their configs merged in. i18n keys added across all 13 locales. |
||
|
MHSanaei
|
08bc481ae3 |
refactor(settings): reorganize subscription settings into clearer tabs
- Split the Happ and Clash/Mihomo routing sections out of Information into their own dedicated tabs. - Extract the profile/branding fields (title, support URL, profile page, announcement, theme dir) out of the mislabeled "Subscription Title" divider into a new Profile tab. - Move the Update Interval setting into Information and drop the single-field Intervals tab. - Add the "profile" tab label across all locales. |
||
|
MHSanaei
|
c7a0188772 |
feat(settings): schedule picker, toggle placement, sub-theme docs link
- Replace the Telegram "Notification Time" free-text field with a guided cron builder: @every + number + unit (s/m/h), the @hourly/@daily/@weekly/ @monthly macros, and a Custom option that seeds a valid 6-field crontab (cron runs with seconds enabled) as an escape hatch. - Move "Restart Xray After Auto Disable" from the External Traffic tab to Panel Settings, where it belongs. - Add a "Template guide" link to the Sub Theme Directory setting pointing at docs/custom-subscription-templates.md. - Localize all new strings across every locale. |
||
|
MHSanaei
|
5eec178483 |
feat(mtproto): route Telegram egress through Xray routing rules
Add a per-inbound "Route through Xray" toggle (off by default) plus an optional outbound picker on MTProto inbounds. mtg only supports a SOCKS5 upstream, so when enabled the panel injects a loopback SOCKS bridge into the generated Xray config — tagged with the inbound's own tag — and mtg dials Telegram through it via a [network] proxies upstream. The router then governs Telegram egress: matchable in the Routing tab, or forced to a chosen outbound/balancer via the picker. - mtproto: Instance carries RouteThroughXray + XrayRoutePort (in the fingerprint); InstanceFromInbound parses them; renderConfig emits the socks5 [network] upstream; freeLocalPort exported as FreeLocalPort. - xray.go: injectMtprotoEgress appends the loopback SOCKS bridge and prepends an optional inboundTag->outbound/balancer rule, hot-appliable like injectPanelEgress. - inbound.go: backend-owned egress port persisted in settings, allocated once and carried across edits (stored value wins); stripped with the inert outboundTag when routing is off; allocation failure fails the save; routed add/update/del force a config regen. - mtproto_job: skip folding mtg metrics for routed inbounds (the bridge, carrying the inbound tag, is metered by xray_traffic_job) to avoid double-counting. - frontend: toggle + outbound/balancer Select (useOutboundTags) on the MTProto form; i18n keys for all locales. |
||
|
MHSanaei
|
5716ae5987 |
feat(outbound): batched connection tester with direct timed HTTP probes
Replace the per-outbound burstObservatory polling (one temp xray spawn + up to 15s of /debug/vars polling per outbound, serialised) with one shared temp xray instance per batch: every tested outbound gets its own loopback SOCKS inbound plus an inboundTag->outboundTag routing rule, and the panel times a real HTTP request through each one in parallel. The probe returns as soon as the response lands and records the HTTP status plus an httptrace breakdown (proxy connect / TLS via outbound / first byte) shown in the result popover. New POST /panel/api/xray/testOutbounds endpoint (array in, results in input order, max 50); the legacy /testOutbound endpoint now delegates to the same engine. Test All chunks HTTP probes 16 per request, and a batch whose shared process never comes up (one structurally-broken outbound poisons the config) retries each item in an isolated instance so the broken outbound reports xray's real error while the rest still test. |
||
|
MHSanaei
|
85983eec1a |
refactor(groups): restyle traffic summary into upload/download + usage cards
Split the group traffic summary into two inbound-style cards: a "Total upload / download" card with up/down arrow icons and a "Total Usage" card with the pie icon. Add the totalUpDown label across all locales. |
||
|
MHSanaei
|
1c5cb84492 |
feat(groups): show upload/download breakdown in group traffic
Add per-group up/down to GroupSummary (backend + schema), surface them as Upload/Download columns in the groups table, and fold upload/download into the Total traffic summary card. Rename the group "Clients in group" column to just "Clients" across all locales. |
||
|
MHSanaei
|
7c698c4bcf |
feat(inbound): support abstract unix sockets (@ prefix) in Address field
Accept the @-prefixed abstract socket form (e.g. @xray/in.sock) for an inbound listen address, not just path-based sockets. The form now allows Port 0 for both, and the Address help text documents the @ form across all locales. The backend already treated both prefixes as unix sockets. @ |
||
|
MHSanaei
|
f1a4286e2f |
feat(sub): per-inbound sort order for subscription links
Add a subSortIndex field to inbounds that controls the order of links in subscription output only: the raw sub body, the HTML sub page, and the JSON/Clash formats (all served from the same query). Lower values come first; ties keep id order. The panel inbound list is unaffected. The value is editable in the inbound form next to the share-address fields, propagates to nodes via wireInbound, and follows the usual node-sync rules (copied on import, mirrored while not dirty, never a structural change). Rescoped from #5214 by @Ponywka. |
||
|
MHSanaei
|
7ae3ea66d1 |
feat(ui): improve client form modal UX
- Rename tabs: "Basic" → "Basics", "Config" → "Credentials" - Move reverseTag field from Credentials tab to Basics tab - Move IP log button inline with limitIp field (tooltip button, edit mode only) - Hide random email button when editing an existing client - Add tooltips to totalGB and limitIp fields with descriptive hints - Rename labels: "Total Sent/Received (GB)" → "Traffic Limit (GB)", "Duration" → "Duration (days)" - Add renewDays translation key for auto-renew label with unit hint - Remove redundant filterOption and width style from AutoComplete group selectors - Update all 15 locale files with new and renamed translation keys |
||
|
MHSanaei
|
253063b785 |
feat: filter inbounds and clients by node (#4997)
Multi-node panels had no way to narrow the inbounds or clients lists to a single node. Add a node filter to both pages: - Inbounds: a toolbar select (All / Local / each node) that filters the list client-side; shown only when the panel has nodes or node-attached inbounds. - Clients: a Nodes multi-select in the filter drawer. Node selections are mapped onto inbound IDs client-side and fed through the existing inbound CSV paging parameter, so the paging backend is untouched; an impossible id (-1) is sent when no inbound matches so the filter yields an honest empty result. InboundOption now carries nodeId to make the mapping possible. The local panel is selectable via a 0 sentinel (inbounds without a nodeId). New i18n keys in all 13 locales. |