* feat(utils): add speedFormat utility and tests
* feat(inbounds): add InboundSpeedEntry type
* feat(inbounds): add speed column to inbound list
* feat(inbounds): show speed in inbound stats modal
* feat(inbounds): compute inbound speed from traffic deltas
* feat(inbounds): wire inbound speed through page
* feat(i18n): add speed translation for all locales
* refactor(inbounds): dedupe live-speed UI and harden formatting
Extract a shared InboundSpeedTag component and isActiveSpeed guard used by the speed column and stats modal, unify InboundSpeedEntry into a single type, and route speedFormat through sizeFormat.
Also guard sizeFormat against non-finite input (no more "NaN PB/s") and clear stale per-inbound speeds when a traffic poll returns no deltas.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* feat(docker): support XUI_PORT runtime override
Allow deployments to select the panel listener port without mutating the persisted webPort setting. Invalid values fall back to the database-backed port and are covered by parser boundary tests.
* docs: describe XUI_PORT deployment usage
Add commented local and Compose examples, explain runtime precedence, and call out matching Docker bridge port mappings.
Add a Links tab to the client form for attaching third-party share
links and remote subscription URLs per client. They are merged into
the client's raw/JSON/Clash subscription output: links are emitted
verbatim and parsed for JSON/Clash; subscription URLs are fetched
(cached, with a short timeout) and their configs merged in.
i18n keys added across all 13 locales.
Test All only iterated the editable template outbounds, so subscription
outbounds (the read-only "from subscriptions" table) were never probed in
bulk. They are now queued too, keyed by tag in subscriptionTestStates so
their rows light up live; the template and subscription HTTP lanes run
serially to respect the backend's single-batch lock (TCP runs alongside).
Also stop testing freedom ("direct") and dns outbounds: they aren't
proxies, so an HTTP probe through them only measures the host's own
reachability, not a tunnel. They are now untestable in every mode -- the
per-row button is disabled and Test All skips them -- with a matching
backend guard so a direct API caller can't HTTP-test them either.
The node probe honored the per-node TlsVerifyMode (skip/pin) but
runtime.Remote used a shared client with no TLSClientConfig, so traffic
sync and every other remote op fell back to system-CA verification and
failed against self-signed nodes even after the operator set skip/pin.
Move the TLS client builder into the runtime layer (HTTPClientForNode /
DecodeCertPin) as the single source of truth, have Remote build and cache
its per-node client through it, and delegate the service probe to the same
builder so the two paths can no longer diverge.
v3.3.1 removed the Panel Proxy URL field from the UI but left the stored
panelProxy/tgBotProxy values in the DB. The Telegram bot still reads
tgBotProxy directly, so a stale value masked the panelOutbound egress
fallback. Add a one-off seeder to drop both rows.
Closes#5266
The #5035 change tagged node-hosted entries with the node name to
disambiguate multi-node subscriptions, but the node name is
panel-internal and leaked into the profile names end users see in
their client apps. Drop the suffix entirely — remarks are the
admin-set inbound remark again.
The vlessenc fix (#5185) enabled flow on XHTTP only in the security=none
branch of genVlessLink, and the Clash builder still gated flow on
network==tcp. With XHTTP+REALITY+vlessenc the panel accepts and stores
the flow (inboundCanEnableTlsFlow passes), but subscriptions dropped it,
so clients received configs without xtls-rprx-vision.
Add vlessFlowAllowed mirroring inboundCanEnableTlsFlow — tcp with
tls/reality, or xhttp with vlessenc regardless of security layer — and
use it in both the vless:// link generator and the Clash proxy builder.
- Split the Happ and Clash/Mihomo routing sections out of Information into
their own dedicated tabs.
- Extract the profile/branding fields (title, support URL, profile page,
announcement, theme dir) out of the mislabeled "Subscription Title"
divider into a new Profile tab.
- Move the Update Interval setting into Information and drop the
single-field Intervals tab.
- Add the "profile" tab label across all locales.
- Replace the Telegram "Notification Time" free-text field with a guided
cron builder: @every + number + unit (s/m/h), the @hourly/@daily/@weekly/
@monthly macros, and a Custom option that seeds a valid 6-field crontab
(cron runs with seconds enabled) as an escape hatch.
- Move "Restart Xray After Auto Disable" from the External Traffic tab to
Panel Settings, where it belongs.
- Add a "Template guide" link to the Sub Theme Directory setting pointing at
docs/custom-subscription-templates.md.
- Localize all new strings across every locale.
Add a per-inbound "Route through Xray" toggle (off by default) plus an
optional outbound picker on MTProto inbounds. mtg only supports a SOCKS5
upstream, so when enabled the panel injects a loopback SOCKS bridge into
the generated Xray config — tagged with the inbound's own tag — and mtg
dials Telegram through it via a [network] proxies upstream. The router
then governs Telegram egress: matchable in the Routing tab, or forced to a
chosen outbound/balancer via the picker.
- mtproto: Instance carries RouteThroughXray + XrayRoutePort (in the
fingerprint); InstanceFromInbound parses them; renderConfig emits the
socks5 [network] upstream; freeLocalPort exported as FreeLocalPort.
- xray.go: injectMtprotoEgress appends the loopback SOCKS bridge and
prepends an optional inboundTag->outbound/balancer rule, hot-appliable
like injectPanelEgress.
- inbound.go: backend-owned egress port persisted in settings, allocated
once and carried across edits (stored value wins); stripped with the
inert outboundTag when routing is off; allocation failure fails the save;
routed add/update/del force a config regen.
- mtproto_job: skip folding mtg metrics for routed inbounds (the bridge,
carrying the inbound tag, is metered by xray_traffic_job) to avoid
double-counting.
- frontend: toggle + outbound/balancer Select (useOutboundTags) on the
MTProto form; i18n keys for all locales.
Replace the per-outbound burstObservatory polling (one temp xray spawn +
up to 15s of /debug/vars polling per outbound, serialised) with one
shared temp xray instance per batch: every tested outbound gets its own
loopback SOCKS inbound plus an inboundTag->outboundTag routing rule, and
the panel times a real HTTP request through each one in parallel. The
probe returns as soon as the response lands and records the HTTP status
plus an httptrace breakdown (proxy connect / TLS via outbound / first
byte) shown in the result popover.
New POST /panel/api/xray/testOutbounds endpoint (array in, results in
input order, max 50); the legacy /testOutbound endpoint now delegates to
the same engine. Test All chunks HTTP probes 16 per request, and a batch
whose shared process never comes up (one structurally-broken outbound
poisons the config) retries each item in an isolated instance so the
broken outbound reports xray's real error while the rest still test.
Split the group traffic summary into two inbound-style cards: a "Total
upload / download" card with up/down arrow icons and a "Total Usage" card
with the pie icon. Add the totalUpDown label across all locales.
Add per-group up/down to GroupSummary (backend + schema), surface them
as Upload/Download columns in the groups table, and fold upload/download
into the Total traffic summary card. Rename the group "Clients in group"
column to just "Clients" across all locales.
Accept the @-prefixed abstract socket form (e.g. @xray/in.sock) for an
inbound listen address, not just path-based sockets. The form now allows
Port 0 for both, and the Address help text documents the @ form across
all locales. The backend already treated both prefixes as unix sockets.
@
An authenticated admin could set xrayTemplateConfig.log.access/error to an
arbitrary path (via the raw Xray editor or a wholesale DB import), making the
supervised Xray process write its log there — an arbitrary file write as the
Xray user (root in many deployments). resolveXrayLogPaths now reduces any log
path to its base filename under config.GetLogFolder(), so absolute paths and
".." traversal can no longer escape the log folder; "" and "none" still
disable logging.
Importing a second inbound whose clients overlap an already-imported inbound
failed with "UNIQUE constraint failed: client_traffics.email". The import path
carries exported ClientStats, and tx.Save(inbound) cascaded that has-many
association as INSERTs whose ON CONFLICT targets only the primary key, so a
shared email (already owning a row from the first import) tripped the global
unique constraint.
Omit the ClientStats association on save and insert the carried stats ourselves
with the same OnConflict{email, DoNothing} guard AddClientStat already uses:
new clients keep their imported counters, shared emails reuse the existing row.
Then run an idempotent AddClientStat pass over all clients so any client present
in settings but missing from the stats payload still gets a traffic row (else it
would escape quota/expiry accounting), and propagate insert errors so the tx
rolls back instead of committing a partial state.
Add a subSortIndex field to inbounds that controls the order of links
in subscription output only: the raw sub body, the HTML sub page, and
the JSON/Clash formats (all served from the same query). Lower values
come first; ties keep id order. The panel inbound list is unaffected.
The value is editable in the inbound form next to the share-address
fields, propagates to nodes via wireInbound, and follows the usual
node-sync rules (copied on import, mirrored while not dirty, never a
structural change).
Rescoped from #5214 by @Ponywka.
- Rename tabs: "Basic" → "Basics", "Config" → "Credentials"
- Move reverseTag field from Credentials tab to Basics tab
- Move IP log button inline with limitIp field (tooltip button, edit mode only)
- Hide random email button when editing an existing client
- Add tooltips to totalGB and limitIp fields with descriptive hints
- Rename labels: "Total Sent/Received (GB)" → "Traffic Limit (GB)", "Duration" → "Duration (days)"
- Add renewDays translation key for auto-renew label with unit hint
- Remove redundant filterOption and width style from AutoComplete group selectors
- Update all 15 locale files with new and renamed translation keys
Multi-node panels had no way to narrow the inbounds or clients lists to
a single node. Add a node filter to both pages:
- Inbounds: a toolbar select (All / Local / each node) that filters the
list client-side; shown only when the panel has nodes or node-attached
inbounds.
- Clients: a Nodes multi-select in the filter drawer. Node selections
are mapped onto inbound IDs client-side and fed through the existing
inbound CSV paging parameter, so the paging backend is untouched; an
impossible id (-1) is sent when no inbound matches so the filter
yields an honest empty result. InboundOption now carries nodeId to
make the mapping possible.
The local panel is selectable via a 0 sentinel (inbounds without a
nodeId). New i18n keys in all 13 locales.
GET /panel/api/clients/get/:email returned the quota (totalGB) but not
the bytes the client has actually used, forcing API consumers to scrape
it elsewhere. Add a sibling "usedTraffic" field (up+down, including the
cross-node global overlay) next to "client" and "inboundIds".
The panel seeded xhttp configs with scMaxEachPostBytes=1000000 and
scMinPostsIntervalMs=30 — xray-core''s own defaults — and emitted them
into every generated config and share link. The literal
scMinPostsIntervalMs=30 is a stable DPI fingerprint that Russia''s TSPU
keys on to block connections on mobile networks.
New configs no longer seed these values (empty schema/template defaults,
so xray-core applies its internal defaults). For configs already stored
with the old defaults, the link/subscription builders now drop values
equal to xray-core''s defaults instead of advertising them — covering
panel share links, the raw subscription, and the JSON subscription
without requiring every inbound to be re-saved. Non-default values the
user set deliberately are still emitted.
applyClientFieldByEmail patched only the first inbound that the
client_traffics row pointed at. For a multi-inbound client the sibling
inbounds kept the old expiryTime/totalGB/limitIp in their settings JSON,
and the next SyncInbound over a stale sibling reverted the edit in the
normalized records — the Telegram bot's expiry change appeared to apply
and then sprang back. Patch the field on every inbound linked to the
email, falling back to the legacy single-inbound lookup for clients that
were never normalized.
An inbound pushed to nodes keeps the same remark on every copy, so a
multi-node subscription (and the panel's per-client link view) listed
several identically-named entries differing only by address. Append the
node name to the remark of node-hosted inbounds unless the admin already
included it.
The fallbacks card only renders for VLESS/Trojan over RAW with TLS or
Reality security, and a new inbound starts at security=none — so the Add
Inbound page looked like it had lost fallback support entirely. Show an
inline hint in that state pointing at the Security tab.
The panel egress is injected as a routing rule, so a routing balancer is
a valid target for it (unlike the geodata download, which dials a forced
outbound tag and bypasses the router). Surface routing balancers in the
panel outbound picker as a separate group, and emit balancerTag instead
of outboundTag in the injected egress rule when the configured tag names
a balancer, so the panel's own traffic load-balances across its members.
The v3 outbound test spins up a temp xray that probes the outbound via
burstObservatory. Two regressions made it report "Failed" for healthy
outbounds on high-latency / tunnel-routed boxes (e.g. default route over
an OpenVPN tun device to a remote proxy), even though client traffic over
the same outbound works:
- Each probe disables keep-alive, so every attempt is a cold round-trip
(redial + re-handshake). The 5s per-probe timeout was too tight for such
paths and every probe timed out. Restore the ~10s budget the pre-v3
SOCKS-based test gave a cold connection (timeout 5s -> 10s) and widen the
poll window 12s -> 15s so one full probe can complete and surface alive.
- The temp config set log error to "none", discarding the real failure
reason, so "Failed" was undiagnosable. Route error logs to stderr ("")
like the production template does, so the probe error (DNS lookup
failure, connection refused, deadline exceeded, TLS error, ...) is
captured into the panel/Xray log, and point the operator there in the
generic timeout messages.
Multi-node sync/import drift can leave the same client twice inside an
inbound's legacy settings.clients JSON while the normalized
client_inbounds table stays clean (SyncInbound dedupes the rows it
writes but never rewrites the JSON). All three subscription builders
iterated that JSON verbatim, so every duplicate entry became a
duplicate profile in the raw, Clash, and JSON output.
Filter and dedupe by email in one shared helper (link generation keys
purely on inbound + email, so same-email entries are pure duplicates
and dropping them is lossless). The clash/json services' own
inboundService copies became unused and are removed.
Subscriptions resolved a node-managed inbound's address to the node's
panel address unconditionally, so an inbound bound to a specific public
IP advertised an endpoint clients could not reach. The shareAddrStrategy
field added in #5162 only applied to panel share/QR links by design.
resolveInboundAddress now follows the same order as the panel's link
builder: 'listen' prefers a routable bind, 'custom' prefers shareAddr,
and the default 'node' keeps the existing node-first behavior, so output
is unchanged for inbounds that never set the field. Applies to raw,
JSON, and Clash subscriptions, which all resolve through this path.
Help text in all locales updated to drop the 'subscriptions are not
affected' caveat.
The orphan sweeps in setRemoteTrafficLocked deleted the (node, email)
baseline row unconditionally whenever an email was missing from one
inbound's snapshot stats — even though baselines are keyed per node, not
per inbound. For a client attached to two inbounds of the same node whose
stats the node reports under only one of them, the sweep for the other
inbound deleted the baseline at the end of every sync cycle. Depending on
inbound order, the baseline written earlier in the same transaction was
wiped each time, so the next cycle computed delta against a missing
baseline (zero) and the client's traffic froze permanently.
Scope both sweeps to the union of emails across the whole snapshot: a
baseline is only dropped when the email left the node entirely.
* feat: select node inbounds for synchronization
Allow node owners to import either all remote inbounds or an explicit tag-based selection. Add remote inbound discovery, persistence, snapshot filtering, API documentation, tests, and localized UI labels.
* fix
* fix: scope node reconcile and orphan sweep to selected inbound tags
In 'selected' sync mode unselected inbounds never enter the panel DB, so
ReconcileNode treated them as undesired and deleted them from the node the
first time it went config-dirty. Reconcile now only sweeps remote tags that
are part of the selection; everything else on the node is unmanaged.
Panel-created or renamed inbounds on a selected-mode node also vanished:
their tag was outside the selection, so the next traffic pull filtered them
out of the snapshot and the orphan sweep silently dropped the central row.
AddInbound/UpdateInbound now allow the tag on the node before committing.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* fix: derive JSON/Clash subscription URLs from configured subURI
When subURI is explicitly configured (reverse-proxy setup) but subJsonURI
or subClashURI are not, BuildSubURIBase generates URLs with the raw sub-
server port (2096) and the wrong scheme (http), producing broken links
on the subscription page (e.g. http://domain:2096/json/SUB_ID).
Fix: in BuildURLs, when subURI is set, extract its scheme+host and use
that as the base for all unconfigured sibling URLs instead of calling
BuildSubURIBase. This ensures JSON and Clash Copy URLs match the reverse-
proxy endpoint.
Fixes: JSON/Clash subscription URLs shown on the subscription info page
now correctly inherit the configured subURI's scheme and host.
* fix(sub): fall back to request base when configured subURI is unparseable
Harden the JSON/Clash URL derivation added for the reverse-proxy fix:
extractBaseFromURI now returns "" when the configured subURI has no
scheme/host, and BuildURLs falls back to the request-derived base in
that case instead of emitting a broken value (e.g. ":///json/ABC").
Add a regression test covering a scheme-less subURI.
---------
Co-authored-by: w3struk <w3struk@gmail.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Adopt xray-core's statsUserOnline policy and GetUsersStats RPC so online
detection is connection-based and IP limiting no longer requires an access
log. Falls back to the legacy traffic-delta onlines and access-log parsing
when the running core lacks the RPCs (Unimplemented), probed lazily per
process so a panel-driven version switch re-evaluates automatically.
Backend:
- xray/api.go: GetOnlineUsers (one GetUsersStats call returns all online
users and their source IPs) and IsUnimplementedErr.
- xray/process.go: per-process OnlineAPISupport tri-state capability cache.
- service/xray.go: ensureStatsPolicy injects statsUserOnline into every
policy level of the generated config; XrayService.GetOnlineUsers probes
and falls back.
- job/xray_traffic_job.go: union API onlines into the delta-derived active
set; bump last_online for idle-but-connected clients.
- job/check_client_ip_job.go: API-first IP source with shared enforcement;
live observations bypass the 30-min stale cutoff; access-log path
unchanged for older cores.
- service/setting.go: GetIpLimitEnable always true; new accessLogEnable
default for features that genuinely read the access log.
Frontend:
- Client form split into Basic and Config tabs; IP Limit and IP Log no
longer gated on access log; compact Auto Renew next to Start After First
Use; tabBasic/tabConfig added to all 13 locales.
- Xray logs button on the dashboard now gated on accessLogEnable.
A client attached to several panels has one aggregated row on each
master, but a node only ever saw its local share: the node UI
under-reported usage, and the node kept serving a client whose
cross-panel total had already exceeded its quota — the master's disable
push doesn't kill established connections unless the node restarts xray
itself.
Masters now push their aggregated per-client counters to each node from
NodeTrafficSyncJob (throttled, scoped to the clients that node hosts).
The node stores them in the new client_global_traffics side table keyed
by (masterGuid, email), overwritten on every push so a master-side
reset propagates, and:
- overlays max(local, pushed) onto UI read paths (slim inbound list,
inbound detail, clients list, WS stats, per-email lookups). The full
/panel/api/inbounds/list stays un-overlaid on purpose: it doubles as
the traffic snapshot masters poll, and overlaying it would corrupt
every master's delta accounting;
- trips disableInvalidClients when any master's pushed total exceeds
the client's quota, so the existing RestartXrayOnClientDisable flow
disconnects the client locally;
- clears the side rows on traffic reset, auto-renew, and client
delete, keeping a renewed quota window clean.
Supersedes #5204, which folded pushed globals into client_traffics and
compensated with read-back baselines — that double-counted first-sight
emails and could not work with several masters sharing one node.
client_traffics is the per-email accumulator shared across every inbound
and node the client is attached to. setRemoteTrafficLocked deleted it
unguarded in two sweeps — when a node inbound vanished from the snapshot
(node reinstall, tag change, another master's reconcile on a shared
node) and when an email left one inbound's stats — even though the
email was still attached elsewhere. The next sync then re-seeded the
row with that node's counter alone, so the panel showed the last
changed panel's number instead of the summed total.
Guard both sweeps with emailUsedByOtherInbounds, matching what the
manual-edit path (updateClientTraffics) already does. Truly removed
clients are still cleaned up by the zero-attachment sweep.
The auto-disable job flips client.enable off in the settings JSON when a
client expires or exhausts its traffic, so the inbounds-page rollup filed
every ended client under the gray Disabled badge (and double-counted it
in Depleted when stats were present). Classify with depleted-first
priority, matching computeClientsSummary and the client info modal.
Also backfill cross-inbound client_traffics rows in GetInboundsSlim:
the row is keyed on email and only preloads on the inbound the client
was created on, so on every other attached inbound the depleted/expiring
checks could never fire.
* feat(ui): add select all / clear all shortcuts for inbound multi-select
Adds 'Select all' and 'Clear all' buttons above the inbound multi-select in:
- ClientFormModal (add/edit client)
- BulkAttachInboundsModal (bulk attach clients to inbounds)
- BulkDetachInboundsModal (bulk detach clients from inbounds)
- ClientBulkAddModal (add bulk clients)
Extracts the repeated button logic into a reusable SelectAllClearButtons component.
Includes i18n keys for all 13 supported languages with proper translations.
Closes#5144
* refactor(form): decouple SelectAllClearButtons labels and harden select-all
Accept optional selectAllLabel/clearLabel props so the generic form component is not tied to the client-inbound i18n keys (defaults unchanged). Compute the all-selected state by checking every option is present and union the current value on select-all, so it stays correct if value holds ids outside options.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* feat(sub): add Copy All Configs button to subscription page
* fix(sub): include links in copyAll dependency array
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* chore: fmt
* fix(sub): drop module-level links from copyAll deps to satisfy exhaustive-deps
links is derived from window.__SUB_PAGE_DATA__ at module scope, so listing it in the useCallback dependency array triggers a react-hooks/exhaustive-deps warning (outer-scope value). Matches the existing single-link copy callback's deps.
---------
Co-authored-by: nikan <nikan>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* feat(env): allow setting the initial URI path for the web panel
* fix(setting): normalize and guard XUI_INIT_WEB_BASE_PATH default
Address Copilot review on PR #5149: an env value that is empty, whitespace, or lacks slashes (e.g. `panel`) could produce an invalid webBasePath such as `/ /` and reach the frontend un-normalized.
getEnv now trims whitespace and falls back when the value is empty; the env-derived default is passed through the existing normalizeBasePath helper (reused from node.go) so it always carries a leading and trailing slash. GetBasePath reuses the same helper instead of duplicating the slash logic.
---------
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
* fix: enable XTLS vision flow for VLESS+XHTTP+vlessenc in UI and share links (#5157)
* fix: enable xtls-rprx-vision flow for VLESS XHTTP with vlessenc encryption (#5157)
The flow selector was hidden and the vless:// link omitted flow= because:
1. The backend gate (inboundCanEnableTlsFlow) only accepted tcp+tls/reality.
2. The PR #5185 frontend check used `encryption === 'vlessenc'`, which never
matches — the stored value is a generated ML-KEM dotted string, not the CLI
subcommand name.
Fix: extend inboundCanEnableTlsFlow to also return true for XHTTP when a
non-none vlessenc encryption/decryption value is present. Update all three
call-sites (inbound.go TlsFlowCapable field, client_crud.go clientWithInboundFlow,
inbound_clients.go copy-flow path) and the sub/service.go link generator.
Scope is XHTTP-only: TCP without tls/reality is intentionally excluded.
Add inbound_protocol_test.go covering the new and existing gate combinations,
extend client_flow_isolation_test.go with xhttp+vlessenc cases, and add
frontend tests for canEnableTlsFlow with real ML-KEM key values.
---------
Co-authored-by: rqzbeh <rqzbeh@users.noreply.github.com>
Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>
Instead of requiring a manual SOCKS5/HTTP URL, the panel now lets the
admin pick an Xray outbound from a dropdown (same UX as Geodata
Auto-Update). At runtime, injectPanelEgress appends a loopback SOCKS
inbound (tag: panel-egress) and prepends a routing rule so the panel's
own HTTP traffic — version checks, Telegram, normal geo-file updates —
is routed through the chosen outbound. Xray-native Geodata Auto-Update
is unaffected (it uses its own geodata.outbound inside Xray). Blackhole
outbounds are excluded from both picker dropdowns since routing any
download through one just drops it. Translations updated for all 13
locales.
Add a hot-apply layer that computes a diff between the old and new
generated config and applies only the changed parts through the Xray
gRPC HandlerService and RoutingService, avoiding a full process restart
whenever possible. A restart is still performed when sections that have
no reload API (log, dns, policy, observatory, ...) actually change.
Key additions:
- internal/xray/hot_diff.go: ComputeHotDiff with canonical-JSON
comparison (sorted keys, null=absent, full number precision) so UI
reformatting never triggers a spurious restart
- internal/xray/api.go: AddOutbound/DelOutbound, ApplyRoutingConfig,
GetBalancerInfo, SetBalancerTarget, TestRoute gRPC wrappers
- internal/web/service/xray.go: tryHotApply, ensureAPIServices,
GetBalancersStatus, OverrideBalancer, TestRoute service methods
- internal/web/controller/xray_setting.go: balancerStatus,
balancerOverride, routeTest API endpoints
- frontend: BalancersTab live-status/override columns, RouteTester
component, Restart button removed (Save now hot-applies)
- balancer-helpers.ts: syncObservatories never creates observatory
sections for random/roundRobin balancers (no reload API → restart)
- i18n: balancerLive/Override/routeTester keys added to all 13 locales
Remove the panel-side custom geo download feature (service, controller,
/panel/api/custom-geo/* endpoints, CustomGeoResource model, UI tab) in
favor of Xray-core's native geodata section
(https://xtls.github.io/config/geodata.html).
- pass the top-level "geodata" key through xray.Config so it survives
the template round-trip into the generated config
- add a Geodata Auto-Update section to the Xray Updates modal that
edits geodata (cron schedule, download outbound, asset list) in the
config template and restarts Xray on save
- previously downloaded geo files in the bin folder keep working in
ext: routing rules; the orphaned custom_geo_resources table is left
in place so existing source URLs stay recoverable
Nikan Zeyaei