17 Commits

Author	SHA1	Message	Date
Rouzbeh†	82600936d6	fix(flow): restore XTLS Vision when an inbound becomes flow-eligible (#5520) ... * fix(flow): restore XTLS Vision when an inbound becomes flow-eligible clientWithInboundFlow strips Vision from a VLESS client whenever the target inbound is not flow-eligible at client-write time — e.g. an XHTTP inbound before its vlessenc (ML-KEM) encryption is set, or a client attached to such an inbound. Nothing restored the flow once the inbound later became eligible: an inbound edit stores its settings verbatim and never re-gates the clients. So enabling encryption on an existing XHTTP inbound left every client without flow, and the generated configs, share links and subscriptions silently dropped flow=xtls-rprx-vision — most visibly on node inbounds and on any inbound where encryption was turned on after the clients existed. Restore the flow at the two points where an inbound can become eligible: - UpdateInbound: after the new stream/settings are final, re-add Vision to clients that currently carry no flow but whose intended flow (their flow_override on a sibling inbound, via EffectiveFlowByEmail) is Vision — only when the inbound is now flow-eligible. - MigrationRestoreVisionFlow: a one-time, idempotent boot migration that applies the same repair to existing installs and refreshes flow_override via SyncInbound. The repair is conservative: it never invents a flow for a client that has none anywhere, never overwrites an explicit flow, and is a no-op on healthy installs. Adds EffectiveFlowByEmail and a unit test covering keep/skip/no-op cases. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * style(flow): serialize restored settings with MarshalIndent Match the indented JSON used by the adjacent timestamp block in UpdateInbound and the externalProxy migration, so a restored inbound's settings column keeps the same multi-line format as everything else (review nit on #5520). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * perf(flow): batch the intended-flow lookup and run it on the active tx restoreVisionFlowForEligibleInbound resolved each empty-flow client's intended flow with EffectiveFlowByEmail, which issued two queries per client (GetRecordByEmail + EffectiveFlow). A client that genuinely uses no Vision keeps an empty flow forever, so it was re-queried on every UpdateInbound and every boot — O(clients) queries per save on a Reality/TCP or XHTTP+vlessenc inbound carrying many non-Vision clients, executed inside the serialized writer transaction. Replace it with EffectiveFlowsByEmails: collect every empty-flow email first and resolve them in a single batched join over client_inbounds + clients (lowest inbound_id wins, same rule as before), chunked for the SQLite bind-var limit. Also thread the active tx through restoreVisionFlowForEligibleInbound so the read runs on the writer's own connection while it holds the lock instead of a separate pooled connection (UpdateInbound passes its tx; the boot migration passes nil → GetDB() as before). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-24 13:02:42 +02:00
MHSanaei	315ecc2588	fix(inbound): persist streamSettings for tunnel so sockopt saves ... normalizeStreamSettings cleared StreamSettings for any protocol outside its whitelist, and tunnel was missing. The frontend sent sockopt correctly but the backend wiped it on every add/update. Tunnel relies on sockopt (notably sockopt.tproxy for TProxy/redirect mode), so add it to the whitelist.	2026-06-21 02:34:57 +02:00
nima1024m	af3f460065	fix(routing): sync xray rules when panel inbound tags change or are deleted (#5367) ... * fix(routing): sync xray rules when panel inbound tags change or are deleted When an auto-generated inbound tag changes (e.g. port edit), propagate the rename into xrayTemplateConfig routing rules and loopback outbounds. On inbound delete, drop rules that only matched that tag and strip the tag from rules that also match on domain, IP, or other fields. Run the template update after the inbound DB transaction commits so SQLite WAL reads see the stored xray settings reliably. * fix(inbounds): return needRestart after deferred routing tag sync Use a named needRestart return in UpdateInbound so the post-commit PropagateInboundTagRename defer can signal callers to restart Xray. --------- Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>	2026-06-20 01:18:31 +02:00
MHSanaei	c5d31de4e9	fix(service): serialize client/inbound writes to prevent Postgres deadlock ... Client/inbound mutations opened their own transactions that locked client_traffics before inbounds, while the @every 5s traffic poll (AddTraffic, already serialized through the traffic writer) locks them in the opposite order. Concurrently these formed an ABBA lock cycle that Postgres aborted as "deadlock detected" (SQLSTATE 40P01), failing client updates. Route those DB writes through the same single-goroutine traffic writer via a new runSerializedTx helper, so they can never run concurrently with the poll. For the client-edit paths the runtime (node) push is moved after the commit, keeping network I/O out of the serialized section. UpdateInbound keeps its push inside the transaction because EnsureInboundTagAllowed must reach the node before the central row is committed. Covers UpdateInboundClient/addInboundClient/DelInboundClientByEmail/ delInboundClients, the bulk adjust/delete transactions, and UpdateInbound.	2026-06-17 15:55:47 +02:00
MHSanaei	982595968d	fix(inbound): regenerate SS-2022 client PSKs on method key-size change ... Switching a Shadowsocks-2022 inbound between ciphers of different key sizes (e.g. aes-256 <-> aes-128) resized the server PSK but left existing client PSKs at the old length. xray rejects a wrong-length uPSK, so links stopped connecting. Regenerate mismatched client keys on inbound add/update, mirroring the single-client form's existing self-heal. Affected clients must re-subscribe.	2026-06-17 14:11:35 +02:00
Sanaei	709b332d17	feat(hosts): managed Hosts for per-host subscription link overrides (#5409) ... * test(sub): characterize current link output (externalProxy + single-link baselines) Phase 0 of the Hosts feature. Locks current subscription-link output for the externalProxy paths (vless/vmess/trojan/ss exact, reality/hysteria by Contains) so the upcoming ShareEndpoint refactor can be proven behavior-preserving. These must stay green and unedited through every later phase. * refactor(sub): unify external-proxy link building behind ShareEndpoint (TDD, snapshot-locked) Phase 1 of the Hosts feature. Collapse the duplicated externalProxy link builders (param-form for vless/trojan/ss, object-form for vmess) onto a single ShareEndpoint abstraction so Phase 4 can add Host-driven links with ~zero new branching. Design: an externalProxy-derived endpoint carries the original entry map and applies it through the UNCHANGED applyExternalProxyTLS{Params,Obj} helpers, so output is provably byte-identical. buildExternalProxyURLLinks / buildVmessExternalProxyLinks become thin adapters; the genVless/Trojan/SS/Vmess call sites are untouched. genHysteriaLink is deliberately left on its own path (hex pinSHA256, not pcs). The no-externalProxy default tails are unchanged. TDD: N1-N4 (externalProxyToEndpoint, inboundDefaultEndpoint, buildEndpointLinks, buildEndpointVmessLinks) written failing-first against stubs, then implemented. Mutation sanity (performed + reverted): dropping the ep-carry in externalProxyToEndpoint makes the Phase-0 C1/C2 characterization snapshots go red (TLS overrides vanish), proving the snapshots guard the emitted output. Gate: go test ./internal/sub/... and go test ./... green with ZERO edits to the Phase-0 snapshots; go build ./... green on linux and windows; go vet clean. * feat(model): Host entity + automigrate + openapi codegen (TDD) Phase 2 of the Hosts feature. Adds the Host GORM model: an override endpoint attached to an inbound (address/port + TLS/transport/clash overrides + sub scoping), superseding the legacy externalProxy array functionally while leaving it intact. - model.Host with snake_case column tags, json serializer for slices, text for free-JSON (mux/sockopt/xhttp), validate tags (remark 1-40, port 0-65535, security + mihomoIpVersion enums); TableName "hosts". NodeGuids column is added now but unused (host->node scoping deferred to v2). - Registered in BOTH initModels() (db.go) and migrationModels() (migrate_data.go); the latter is required for cross-DB migration and is easy to miss. PG sequence resync iterates the initModels slice, so it is covered automatically. - pruneOrphanedHosts() deletes hosts whose inbound_id has no inbound, called alongside pruneOrphanedClientInbounds(). - openapigen manifest: Host added to StructAllow with MuxParams/SockoptParams/ XhttpExtraParams -> KindAny; regenerated frontend/src/generated/* + openapi.json. TDD: TestHostTableName, TestHostValidation, TestHostAutoMigrateCreatesColumns (+ _Postgres), TestPruneOrphanedHosts written failing-first against a wrong-name, untagged, unregistered stub, then implemented. Gate: go test ./... green on SQLite AND a real Postgres DSN (local container); go build/vet/gofmt clean; npm run gen succeeds with the new Host type/schema/ example/zod; npm run typecheck + npm run test (542) green. * feat(api): Host CRUD service + controller + routes (TDD) Phase 3 of the Hosts feature. - service/host.go (HostService, empty struct + database.GetDB() like ClientService): GetHosts, GetHostsByInbound, GetHost, AddHost (verifies the inbound exists — no hard FK), UpdateHost (inbound + sort order immutable here), DeleteHost, SetHostEnable, SetHostsEnable, DeleteHosts, ReorderHosts (single driver-safe transaction), GetAllTags. - controller/host.go mirrors NodeController: routes under /panel/api/hosts (list/get/byInbound/tags + add/update/del/setEnable/reorder + bulk/setEnable, bulk/del), binds via middleware.BindAndValidate so the model validate tags are enforced, {success,msg,obj} envelopes. - Wired the hosts group into api.go after nodes (inherits checkAPIAuth + CSRF). - DelInbound now cascades: deleting an inbound deletes its hosts. - Documented all 11 routes in api-docs endpoints.ts (referencing the generated Host schema) and regenerated openapi.json; extended TestAPIRoutesDocumented's controller->basePath switch for host.go. Backend en toast keys added. TDD: service tests (Add/GetByInbound, RejectsUnknownInbound, Reorder, Set/Bulk enable, DeleteHosts, DeleteInboundCascadesHosts, GetAllTags) written failing- first against a nil-returning stub; controller test (AddListGetDelete envelope round-trip + AuthInherited 401) added. Gate: go test ./internal/web/... + go test ./... green; npm run gen + typecheck + lint + test (542) + build green. * feat(sub): render subscription links from hosts; legacy fallback when none (TDD, mutation-checked) Phase 4 of the Hosts feature. Inserts host resolution between inbound and link across all three subscription formats. Mechanism: hostEndpoints(inbound, format) loads the inbound's enabled hosts (filtered by ExcludeFromSubTypes, ordered by sort_order then id) and projects each onto the externalProxy entry shape the raw/json/clash renderers already consume. So a host fans out one link/proxy reusing the exact existing rendering (address/port/security/sni/fp/alpn/pins/ech) with zero new TLS code. Host header and path overrides are applied additively in the raw builders (no-op for legacy externalProxy, which never carries those keys — characterization snapshots stay green). Clash ip-version (MihomoIpVersion) is set last on the proxy. Integration points: - getSubs (raw): per inbound, hostEndpoints AFTER projectThroughFallbackMaster; len>0 -> linkFromHosts (renders only the hosts), else legacy GetLink. - GetJson/GetClash: inject the host endpoints into the inbound's externalProxy before the existing getConfig/getProxies loop. - Precedence: hosts win over any legacy externalProxy (injection replaces it). Backward compat: a zero-host inbound takes the legacy path -> byte-identical output (all Phase-0 characterization snapshots unchanged). TDD: 9 cycles (zero-hosts identical, N-links-ordered with host/path override, disabled skipped, host-vs-externalProxy precedence, no-dedup, sort composes with SubSortIndex, host-over-fallback, resolve-via-client-inbounds, ExcludeFromSubTypes per format) written failing-first against unwired helpers, then wired green. Mutation sanity (performed + reverted, documented here): - zero-hosts fallback: flipping the len(hostEps)>0 guard to >=0 makes TestSub_ZeroHosts_IdenticalOutput go red (host path yields "" for no hosts). - no-dedup: adding a remark-dedup in hostEndpoints makes TestSub_NHosts_NoDedup go red (two distinct hosts collapse to one link). Gate: go test ./internal/sub/... + go test ./... green with ZERO edits to the Phase-0 snapshots; go build green on linux and windows; go vet + gofmt clean. * feat(migration): seed hosts from inbound externalProxy (TDD, idempotent, dual-driver) Phase 5 of the Hosts feature. One-time migration so existing installs surface their legacy externalProxy entries as first-class Host rows. - seedHostsFromExternalProxy() is self-gated on a HistoryOfSeeders "HostsFromExternalProxy" row (run-once) and wired into runSeeders. For each inbound it parses StreamSettings, reads externalProxy[], and creates one Host per entry: forceTls->Security (unknown->same), dest->Address, port->Port, remark->Remark (generated when blank, capped at 40), sni/fingerprint/alpn/ pinnedPeerCertSha256/echConfigList copied; SortOrder=index; InboundId set. - Additive: externalProxy is left intact in StreamSettings (rollback-safe; the sub layer prefers hosts when present, §Phase 4). - Postgres: GORM db.Create advances hosts_id_seq via the sequence, so no extra resync is needed beyond the existing startup resync. TDD: field-mapping, idempotency (second run no-op), no-externalProxy->no-hosts, externalProxy-kept-intact written failing-first against a stub; plus a Postgres counterpart that skips without XUI_DB_DSN. Gate: go test ./internal/web/service/... ./internal/database/... green on SQLite; the *_Postgres tests green against a real Postgres container; go build green on linux and windows; go vet + gofmt clean. (Running the whole database package under XUI_DB_TYPE=postgres is not supported — the SQLite-path tests share the one DSN — so only the t.Skip-gated *_Postgres tests run with the env set.) * feat(ui): Hosts page + schema + query hooks + link preview helper (TDD on schema/helpers) Phase 6 of the Hosts feature — the admin UI. - schemas/api/host.ts: HostFormSchema (validation: remark 1-40, tags ^[A-Z0-9_:]+$ ≤10×≤36, port 0-65535, security/mihomoIpVersion enums, alpn/fingerprint reused from the shared primitives) + a loose HostRecordSchema/HostListSchema for reads. - lib/hosts/host-link.ts: hostToExternalProxyEntry — the frontend mirror of the backend hostToExternalProxyMap (security->forceTls, sni override rules, port inherit), for share-link previews. - api/queries/useHostsQuery.ts + useHostMutations.ts (mirror the node hooks): list/get + add/update/del/setEnable/reorder/bulk; queryKeys.hosts.* added; mutations invalidate keys.hosts.root(). - pages/hosts/{HostsPage,HostList,HostFormModal}.tsx (+CSS) mirroring pages/nodes: list with remark · address:port · inbound · security · tags · enable Switch · per-inbound move up/down (reorder) · bulk enable/disable/delete; form grouped into Basic / Advanced / Clash / Subscription-scope sections. - Route '/hosts' + sidebar item (Global icon); menu.hosts + pages.hosts.* added to the en-US bundle (other locales fall back to English until translated). TDD: HostFormSchema (10 cases) and hostToExternalProxyEntry (6 cases) written failing-first, then implemented. UI verified by lint/typecheck/test/build. Deferred (documented enhancement): the live in-form share-link preview (needs inbound+client context) and a per-host host/path override in JSON/Clash output (raw already overrides; JSON/Clash inherit the inbound's host/path). Gate: cd frontend && npm run lint && npm run typecheck && npm run test (557) && npm run build all green; go build ./... + go test ./... still green. * refactor(ui): remove the External Proxy form from the inbound stream settings Hosts supersede the legacy externalProxy: the subscription renders from hosts (hosts win when both exist) and the migration converts existing externalProxy entries to hosts. externalProxy's only real consumers were the subscription (now covered) and this form's preview — the backend per-client copy-link never used it — so removing the editor has no functional regression. - Drop ExternalProxyForm + toggleExternalProxy from InboundFormModal and delete the orphaned form component + its export; remove its block test + snapshot. - KEEP the externalProxy schema field and backend parsing/link-generation: an existing inbound's externalProxy still round-trips through the form (not silently destroyed on edit) and still renders if a host was removed. Gate: cd frontend && npm run typecheck + lint + test (556) + build green. * fix(ui): use Alert `title` instead of deprecated `message` (antd 6) Ant Design 6 deprecated <Alert message=> in favor of <Alert title=>; the panel was mid-migration (21 Alerts already on title). Renamed the 7 remaining stragglers across 5 files (SubLinksModal, InboundFormModal, sockopt, EmailTab, TelegramTab), silencing the runtime deprecation warning. description= is unchanged. Pre-existing warning, surfaced while testing Hosts — not introduced by it. Gate: npm run typecheck + lint + test (556) + build green. * style(ui): align Hosts page with Clients/Inbounds cards + reorder columns - page-shell.css never listed .hosts-page, so the Hosts page got no content padding / transparent-layout / summary-card spacing. Add a .hosts-page shell block (background, dark/ultra vars, content-area + summary-card padding). This is the actual "card spacing" bug. - HostList: match the Clients/Inbounds list card — hoverable + the toolbar moved into the card title as a .card-toolbar (Add when nothing selected; selected count + bulk enable/disable/delete on selection). Re-declare .card-toolbar in HostList.css since the shared rule lives in a lazily-loaded page stylesheet. - Reorder table columns as requested: Actions, Enable, then Remark, Endpoint, Inbound, Security, Tags. Added scroll x for narrow screens. - HostsPage: add a summary card (Total / Enabled / Disabled) like the other pages. New i18n keys: pages.hosts.selectedCount + pages.hosts.summary.*. Gate: npm run typecheck + lint + test (556) + build green. * style(ui): use Tabs instead of Collapse in the Add/Edit Host form The Basic / Advanced / Clash / Subscription-scope sections are now tabs. Each pane sets forceRender so all fields stay mounted — required because the form uses preserve=false, so an unmounted tab's values would otherwise be dropped on submit (and a required field on a hidden tab still blocks submit). Gate: npm run typecheck + lint + test (556) + build green. * style(ui): split Host form into Security + Advanced tabs; drop unused JSON fields - Remove the Mux/Sockopt/XHTTP raw-JSON fields from the Host form: they were not wired into link generation and the inbound's structured editors are inbound- specific (not reusable). The DB columns + read schema + generated type stay, so they can get proper editors later. (HostFormSchema drops them; HostRecordSchema keeps them.) - Reorganize tabs to Basic / Security / Advanced / Clash / Subscription scope: Security holds the TLS/cert fields (security, sni, sni-overrides, alpn, fingerprint, pins, verify-by-name, ech); Advanced now holds the transport overrides (host header, path). - i18n: add pages.hosts.sections.security; drop the 3 unused field labels. Gate: npm run typecheck + lint + test (556) + build green. * style(ui): restore Mux/Sockopt/XHTTP fields in the Host Advanced tab Put the three free-JSON override fields back, in the Advanced tab next to host header / path (as JSON inputs — the inbound's structured editors aren't reusable here). Re-added to HostFormSchema + defaults + the i18n labels. Gate: npm run typecheck + lint + test (556) + build green. * feat(hosts): add allowInsecure (rendered) + serverDescription/mihomoX25519/vlessRouteId fields Closes most of the Remnawave-host gap analysis. - model.Host: + allowInsecure, serverDescription (≤64), vlessRouteId (0-65535), mihomoX25519. Auto-migrated (SQLite + Postgres verified); openapi regenerated. - allowInsecure is fully RENDERED into subscription output (TDD): - raw link: allowInsecure=1 (TLS/Reality, skipped for none) via the endpoint builder; - JSON/Clash: applyExternalProxyTLSToStream writes tlsSettings.settings. allowInsecure, and clash applySecurity now emits skip-cert-verify for the tls case (it previously only did so for Hysteria — a pre-existing gap, so inbound allowInsecure now renders for vless/trojan/ss clash too). - Frontend: the four fields added to the Host form (allowInsecure → Security, serverDescription → Basic, vlessRouteId → Advanced, mihomoX25519 → Clash); serverDescription shown under the remark in the list. Schema + i18n updated. serverDescription / vlessRouteId / mihomoX25519 are stored + editable; their deeper rendering (and per-host mux/sockopt/xhttp into JSON/Clash, plus a per-host xray JSON template) are tracked as follow-ups. Gate: go test ./... green (SQLite + Postgres for the host schema/migration); go build linux+windows; go vet + gofmt clean; npm run gen + typecheck + lint + test (556) + build green; generated files in sync. * feat(sub): render host sockopt + xhttp-extra params into JSON/Clash output (TDD) A host's sockoptParams and xhttpExtraParams (free-JSON) now take effect: applyHostStreamOverrides injects sockopt into the per-host stream (re-added since the base stream strips it) and merges xhttpExtraParams into xhttpSettings, called in both getConfig (JSON) and getProxies (Clash) right after the per-host TLS apply. No-op for legacy externalProxy entries (keys absent) — characterization snapshots unchanged. mux rendering is outbound-level (overrides outbound.Mux) and needs a genVless/ genVnext/genServer signature change — deferred, along with the per-host xray JSON template. Gate: go test ./internal/sub/... + go test ./... green (snapshots unchanged); go build + vet + gofmt clean. * feat(sub): render host muxParams as a per-host JSON outbound mux override (TDD) genVnext/genVless/genServer take a muxOverride: a host's muxParams (when valid JSON) overrides the global mux on its JSON outbound; empty falls back to the panel mux (behavior unchanged for non-host configs). Completes the host mux/sockopt/xhttp trio. Test call sites updated for the new signature. Gate: go test ./internal/sub/... + go test ./... green (snapshots unchanged); go build + gofmt clean. * style(ui): show Host security fields conditionally per security (like externalProxy) * feat(sub): apply host SNI + fingerprint override for reality (TDD) A reality host now overrides SNI and fingerprint while inheriting publicKey/ shortId from the inbound (reality keys can't be host-supplied). Previously the reality link kept the inbound's serverName because the TLS appliers are gated to security=="tls". - raw: applyEndpointRealityParams sets sni/fp on the params for reality; - JSON/Clash: applyHostStreamOverrides sets realitySettings.serverName + serverNames from the host SNI. Gated to host endpoints via an isHost marker on the synthesized ep, so the legacy externalProxy path stays byte-identical (characterization snapshots unchanged). The marker is internal and never emitted. Gate: go test ./internal/sub/... + go test ./... green; go build + vet + gofmt clean. * fix(ui): start the Host inbound select unselected instead of showing 0 A new host left inboundId defaulting to 0, so the Select rendered "0". inboundId is now optional in the form (undefined until chosen), so it shows its placeholder ("Select an inbound"); the required rule still enforces a choice on save. Port keeps 0 (means "inherit the inbound's port"). Gate: npm run typecheck + lint + build green. * fix(ui): drop redundant :port suffix from the Host inbound select label The inbound tag (e.g. in-59303-tcp) already carries the port, so the appended ":59303" was duplicated. Show just the remark/tag. Gate: npm run typecheck + lint + build green. * style(ui): apply the shared card hover shadows to the Hosts page page-cards.css scoped its card styling + hover shadows to each page class but not .hosts-page, so Hosts fell back to antd's default hoverable (a larger/blurry shadow + pointer cursor). Add a .hosts-page block matching the other pages. Gate: npm run build green. * feat(hosts): move Tags to Basic tab, add Nodes field, accept VLESS route ranges - Move the Tags field into the Host form's Basic tab and add a Nodes multi-select (visual-only assignment, backed by the existing node_guids column) so the Basic tab matches the reference layout. - Replace the single-port vlessRouteId integer with a free-form vlessRoute string that accepts comma-separated ports/ranges (e.g. 53,443,1000-2000); format-validated on the frontend, stored verbatim on the backend. - Regenerated frontend types/openapi from the changed model. * feat(hosts): structured editors for Mux/Sockopt/XHTTP + new Final Mask Replace the raw JSON textareas in the Host form's Advanced tab with the same structured editors used elsewhere, under a nested tabbed layout (General / Mux / Sockopt / XHTTP / Final Mask), mirroring the Sub-JSON settings tab: - Mux: the Sub-JSON mux editor (enable + concurrency/xudpConcurrency/xudp443). - Sockopt + XHTTP: reuse the outbound SockoptForm / XhttpForm, wrapped in an isolated form that serializes the edited subtree back to the host's JSON string (pruned so the override stays sparse). - Final Mask: new host field (model + column + JSON-render wiring that merges the masks into the host's JSON-subscription stream), edited via the shared FinalMaskForm like the Sub-JSON Final Mask editor. Each editor stays a controlled value/onChange component bound to its existing host JSON string field; backend rendering of mux/sockopt/xhttp is unchanged. * feat(hosts): drop XHTTP + Xray-JSON-template overrides; fix mobile form layout Remove the host's XHTTP extra-params and Xray-JSON-template overrides entirely (model fields + columns, JSON-subscription render paths incl. hostTemplateOutbound, schema, form tab/field, i18n, openapi codegen, and their tests) — they did not fit the host model. Mux, Sockopt and Final Mask stay as structured editors. Mobile fixes for the Edit Host modal: - responsive width (95vw on mobile, was a fixed 760px that overflowed the viewport and clipped the tabs/labels) + a scrollable body so the footer stays on screen; - Mux fields use responsive Row/Col (stack on mobile) instead of a fixed-width label grid. * fix(hosts): hide the spurious horizontal scrollbar in the Edit Host modal Setting overflowY:auto on the modal body forced overflow-x to auto too (CSS rule), so antd Row's negative gutter margins triggered a horizontal scrollbar. Pin overflowX:hidden. * feat(hosts): inbound-style responsive field layout + icon empty state - Host form (main form + Mux/Sockopt/Final Mask editors) now use the inbound form's label layout: label beside the input on desktop (labelCol sm span 8 / wrapperCol sm span 14, right-aligned), stacked label-above-input on mobile. Rewrote HostMuxForm onto an internal antd Form so it follows the same layout instead of a manual grid. - Empty hosts table now shows the host icon + the shared 'Nothing here yet' (noData) text, matching Nodes/Inbounds/Clients, replacing the bespoke 'No hosts yet…' string. * fix(hosts): avoid nested <form> in the Edit Host modal The Mux/Sockopt/Final Mask editors each render their own antd Form inside the host's main Form, producing an invalid nested <form> DOM node (hydration warning). Render those inner forms with component={false} so they keep the form instance/context but emit no <form> element. * fix(hosts): make the Mux enable toggle work The Switch's checked state came from Form.useWatch('mux'), but the mux object field had no registered Form.Item while disabled, so setFieldValue never notified the watcher and the toggle stayed off. Bind the Switch to a real name='enabled' field (antd drives its checked state directly) and keep the sub-fields registered via hidden={!enabled}, serialized to the flat mux JSON. * refactor(hosts): reuse the outbound MuxForm instead of a bespoke Mux editor The Mux fields duplicated the outbound MuxForm. Reuse it through the same wrapper as Sockopt: generalize OutboundSubtreeJsonForm with defaultSubtree (pre-fill on enable) and a serialize hook, and have HostMuxForm render MuxForm at the ['mux'] path. The host keeps its inherit-when-off semantics by storing '' unless mux.enabled. Also drops the now-unused enableSwitch path from the wrapper (only the removed XHTTP editor used it). * style(hosts): use default-width Port input like the inbound form The host Port used width:100% (full width); the inbound's numeric inputs use antd's default width. Drop the override so Port matches. The Mux number inputs already use the default width via the reused MuxForm. * refactor(sockopt): readable customSockopt editor as a shared component The customSockopt rows were a single cramped Space.Compact line and duplicated verbatim in the inbound and outbound sockopt forms. Extract a shared CustomSockoptList that renders each entry as a titled group of labeled fields (System / Level / Opt / Type / Value), matching the rest of the form, and use it in both (and thus the host Sockopt editor). * fix(finalmask): drop the empty Custom Tables tag on a new sudoku mask The sudoku TCP-mask default seeded customTables: [''] (one empty string), which rendered as a blank removable tag. Seed [] instead. * fix(sockopt): make the outbound (and host) Sockopt client-only Per the XTLS sockopt docs, tproxy / acceptProxyProtocol / V6Only / trustedXForwardedFor only apply to an inbound (listening socket); they are meaningless on an outbound/dialer. Drop them from the outbound SockoptForm (which the host reuses). The Sockopt default object still seeds those keys, so the host also strips them on serialize, keeping its override honest to the server/client split. The inbound SockoptForm is left unchanged. * fix(sockopt): make the inbound Sockopt server-only Complete the server/client split: drop the outbound/dialer-only fields from the inbound SockoptForm — dialerProxy, domainStrategy, interface, addressPortStrategy, happyEyeballs, tcpMptcp (client-only since Go 1.24 auto-enables MPTCP on listen). mark stays (xray applies SO_MARK on inbound sockets too). Update the form-blocks snapshot to the server-side field set (intentional spec change). * feat(hosts): populate Sockopt dialerProxy with the panel's outbound tags The host Sockopt editor reused the outbound SockoptForm with outboundTags=[], so the dialerProxy dropdown was empty. Feed it the panel's outbound tags via the existing useOutboundTags hook (shares the cached xray-config query; blackhole excluded), so a host can chain through a subscription outbound by tag. * fix(hosts): empty-state styling on direct load + exclude balancers from dialerProxy - .card-empty was only defined in lazily-loaded Clients/Inbounds/Nodes stylesheets, so a direct /hosts refresh rendered the empty table state unstyled (faint + uncentered) until another page was visited. Re-declare it in HostList.css so it's correct on first load. - The Sockopt dialerProxy dropdown listed balancer tags (useOutboundTags merges them in for mtproto egress). dialerProxy chains a single outbound, so balancers aren't valid — switch to useOutboundTagGroups and use only the outbound group. * fix(outbounds): icon + 'Nothing here yet' empty state; stop fading other pages The Outbounds empty state was a faint '—', and OutboundsTab.css set the global .card-empty to opacity:0.4 — which leaked onto whichever page's empty state was shown after the Outbounds CSS had loaded (e.g. Hosts went faint after visiting Outbounds). Render the icon + noData ('Nothing here yet') like the other lists, and align .card-empty to the shared centered/secondary style (no opacity). * fix(outbounds): custom empty state on the desktop table too The desktop Outbounds Table had no locale.emptyText, so it showed antd's default 'No data' box. Add the same ExportOutlined + noData empty state as the card (mobile) view. * style(sidebar): use ExportOutlined for the Outbounds nav item The Outbounds sidebar item used UploadOutlined (an upload tray). Switch to ExportOutlined, matching the outbound icon now used in the routing target and the outbounds empty states. * feat(hosts): icons on the form tabs (icon-only on mobile) Wrap every Host form tab label (Basic/Security/Advanced/Clash/Subscription scope and the nested General/Mux/Sockopt/Final Mask) with catTabLabel, so the tabs show icon + text on desktop and just the icon (with a tooltip) on mobile, matching the Settings/Xray tab bars. * refactor(hosts): fold Exclude-from-formats into Advanced, drop the one-field tab The Subscription scope tab held only excludeFromSubTypes after Tags moved to Basic — a niche per-format scoping knob. Move it into the Advanced > General sub-tab and remove the standalone tab (and its now-unused subScope label/icon). * feat(sub): per-client remark template variables; drop the remark model & Show Usage Info * fix(migration): cap seeded host remark at the model's 256-char limit, not 40	2026-06-17 12:06:55 +02:00
MHSanaei	5eec178483	feat(mtproto): route Telegram egress through Xray routing rules ... Add a per-inbound "Route through Xray" toggle (off by default) plus an optional outbound picker on MTProto inbounds. mtg only supports a SOCKS5 upstream, so when enabled the panel injects a loopback SOCKS bridge into the generated Xray config — tagged with the inbound's own tag — and mtg dials Telegram through it via a [network] proxies upstream. The router then governs Telegram egress: matchable in the Routing tab, or forced to a chosen outbound/balancer via the picker. - mtproto: Instance carries RouteThroughXray + XrayRoutePort (in the fingerprint); InstanceFromInbound parses them; renderConfig emits the socks5 [network] upstream; freeLocalPort exported as FreeLocalPort. - xray.go: injectMtprotoEgress appends the loopback SOCKS bridge and prepends an optional inboundTag->outbound/balancer rule, hot-appliable like injectPanelEgress. - inbound.go: backend-owned egress port persisted in settings, allocated once and carried across edits (stored value wins); stripped with the inert outboundTag when routing is off; allocation failure fails the save; routed add/update/del force a config regen. - mtproto_job: skip folding mtg metrics for routed inbounds (the bridge, carrying the inbound tag, is metered by xray_traffic_job) to avoid double-counting. - frontend: toggle + outbound/balancer Select (useOutboundTags) on the MTProto form; i18n keys for all locales.	2026-06-12 17:58:45 +02:00
MHSanaei	3af1afc53b	fix(inbound): avoid UNIQUE email constraint when importing inbounds that share clients ... Importing a second inbound whose clients overlap an already-imported inbound failed with "UNIQUE constraint failed: client_traffics.email". The import path carries exported ClientStats, and tx.Save(inbound) cascaded that has-many association as INSERTs whose ON CONFLICT targets only the primary key, so a shared email (already owning a row from the first import) tripped the global unique constraint. Omit the ClientStats association on save and insert the carried stats ourselves with the same OnConflict{email, DoNothing} guard AddClientStat already uses: new clients keep their imported counters, shared emails reuse the existing row. Then run an idempotent AddClientStat pass over all clients so any client present in settings but missing from the stats payload still gets a traffic row (else it would escape quota/expiry accounting), and propagate insert errors so the tx rolls back instead of committing a partial state.	2026-06-12 13:00:04 +02:00
MHSanaei	f1a4286e2f	feat(sub): per-inbound sort order for subscription links ... Add a subSortIndex field to inbounds that controls the order of links in subscription output only: the raw sub body, the HTML sub page, and the JSON/Clash formats (all served from the same query). Lower values come first; ties keep id order. The panel inbound list is unaffected. The value is editable in the inbound form next to the share-address fields, propagates to nodes via wireInbound, and follows the usual node-sync rules (copied on import, mirrored while not dirty, never a structural change). Rescoped from #5214 by @Ponywka.	2026-06-12 12:03:22 +02:00
MHSanaei	253063b785	feat: filter inbounds and clients by node (#4997) ... Multi-node panels had no way to narrow the inbounds or clients lists to a single node. Add a node filter to both pages: - Inbounds: a toolbar select (All / Local / each node) that filters the list client-side; shown only when the panel has nodes or node-attached inbounds. - Clients: a Nodes multi-select in the filter drawer. Node selections are mapped onto inbound IDs client-side and fed through the existing inbound CSV paging parameter, so the paging backend is untouched; an impossible id (-1) is sent when no inbound matches so the filter yields an honest empty result. InboundOption now carries nodeId to make the mapping possible. The local panel is selectable via a 0 sentinel (inbounds without a nodeId). New i18n keys in all 13 locales.	2026-06-12 09:33:35 +02:00
animesha3	554d85c2f7	feat: allow selecting inbounds synchronized from nodes (#5178) ... * feat: select node inbounds for synchronization Allow node owners to import either all remote inbounds or an explicit tag-based selection. Add remote inbound discovery, persistence, snapshot filtering, API documentation, tests, and localized UI labels. * fix * fix: scope node reconcile and orphan sweep to selected inbound tags In 'selected' sync mode unselected inbounds never enter the panel DB, so ReconcileNode treated them as undesired and deleted them from the node the first time it went config-dirty. Reconcile now only sweeps remote tags that are part of the selection; everything else on the node is unmanaged. Panel-created or renamed inbounds on a selected-mode node also vanished: their tag was outside the selection, so the next traffic pull filtered them out of the snapshot and the orphan sweep silently dropped the central row. AddInbound/UpdateInbound now allow the tag on the node before committing. --------- Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>	2026-06-11 20:48:26 +02:00
iYuan	2a7342baa9	feat: add inbound share address strategy (#5162) ... * feat: add inbound share address strategy Allow node-managed inbounds to choose whether exported share links use the node address, routable listen address, or a custom endpoint. Preserve locally configured share address fields during remote node traffic sync. Refs #5161 Refs #4891 * fix: preserve inbound share address settings Forward share address fields to remote nodes, keep existing values when older update payloads omit them, align localhost handling between frontend and subscriptions, and preserve share address settings when cloning inbounds. * fix: keep share address strategy out of subscriptions Limit the new share address strategy to direct exported share links and QR codes. Restore subscription address resolution to the existing panel-owned behavior and update the UI help text accordingly. * fix: address share address review feedback * fix: validate custom share address * fix --------- Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>	2026-06-11 20:24:15 +02:00
MHSanaei	58905d81a4	feat(node-sync): push global client usage to nodes for display and local enforcement ... A client attached to several panels has one aggregated row on each master, but a node only ever saw its local share: the node UI under-reported usage, and the node kept serving a client whose cross-panel total had already exceeded its quota — the master's disable push doesn't kill established connections unless the node restarts xray itself. Masters now push their aggregated per-client counters to each node from NodeTrafficSyncJob (throttled, scoped to the clients that node hosts). The node stores them in the new client_global_traffics side table keyed by (masterGuid, email), overwritten on every push so a master-side reset propagates, and: - overlays max(local, pushed) onto UI read paths (slim inbound list, inbound detail, clients list, WS stats, per-email lookups). The full /panel/api/inbounds/list stays un-overlaid on purpose: it doubles as the traffic snapshot masters poll, and overlaying it would corrupt every master's delta accounting; - trips disableInvalidClients when any master's pushed total exceeds the client's quota, so the existing RestartXrayOnClientDisable flow disconnects the client locally; - clears the side rows on traffic reset, auto-renew, and client delete, keeping a renewed quota window clean. Supersedes #5204, which folded pushed globals into client_traffics and compensated with read-back baselines — that double-counted first-sight emails and could not work with several masters sharing one node.	2026-06-11 15:14:08 +02:00
MHSanaei	aeb2217ae5	fix(ui): classify ended clients as depleted, not disabled, on inbounds page ... The auto-disable job flips client.enable off in the settings JSON when a client expires or exhausts its traffic, so the inbounds-page rollup filed every ended client under the gray Disabled badge (and double-counted it in Depleted when stats were present). Classify with depleted-first priority, matching computeClientsSummary and the client info modal. Also backfill cross-inbound client_traffics rows in GetInboundsSlim: the row is keyed on email and only preloads on the inbound the client was created on, so on every other attached inbound the depleted/expiring checks could never fire.	2026-06-11 14:05:02 +02:00
Rouzbeh†	c7a76e9626	fix: enable XTLS vision flow for VLESS+XHTTP+vlessenc in UI and share links (#5157) (#5185) ... * fix: enable XTLS vision flow for VLESS+XHTTP+vlessenc in UI and share links (#5157) * fix: enable xtls-rprx-vision flow for VLESS XHTTP with vlessenc encryption (#5157) The flow selector was hidden and the vless:// link omitted flow= because: 1. The backend gate (inboundCanEnableTlsFlow) only accepted tcp+tls/reality. 2. The PR #5185 frontend check used `encryption === 'vlessenc'`, which never matches — the stored value is a generated ML-KEM dotted string, not the CLI subcommand name. Fix: extend inboundCanEnableTlsFlow to also return true for XHTTP when a non-none vlessenc encryption/decryption value is present. Update all three call-sites (inbound.go TlsFlowCapable field, client_crud.go clientWithInboundFlow, inbound_clients.go copy-flow path) and the sub/service.go link generator. Scope is XHTTP-only: TCP without tls/reality is intentionally excluded. Add inbound_protocol_test.go covering the new and existing gate combinations, extend client_flow_isolation_test.go with xhttp+vlessenc cases, and add frontend tests for canEnableTlsFlow with real ML-KEM key values. --------- Co-authored-by: rqzbeh <rqzbeh@users.noreply.github.com> Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>	2026-06-11 12:04:02 +02:00
Rouzbeh†	4002be4ade	feat: support latest Wireguard features from Xray-core (PRs #5643, #5833, #5850) (#5131) ... * feat: support latest Wireguard features from Xray-core Implements support for Xray-core PRs #5833, #5643, and #5850 for Wireguard Inbounds: - Adds 'domainStrategy' and 'workers' to Wireguard inbound configuration. - Enables the Stream Settings tab for Wireguard inbounds to configure 'sockopt' and 'finalmask', hiding the irrelevant 'network' transmission dropdown. - Adds the 'randRange' field to the 'noise' UDP Finalmask obfuscation settings. * fix --------- Co-authored-by: Rqzbeh <Rqzbeh@example.com> Co-authored-by: Sanaei <ho3ein.sanaei@gmail.com>	2026-06-10 17:02:41 +02:00
Sanaei	41645255f1	refactor: focused service files, leaf subpackages, and an internal/ layout (#5167) ... * refactor(service): split client.go into focused files client.go had grown to 4455 lines mixing ~10 responsibilities. Split it verbatim into cohesive same-package files (no behavior change): client.go foundation: ClientService, ClientWithAttachments, ClientCreatePayload, ErrClientNotInInbound, sqlInChunk client_locks.go inbound mutation locks, delete tombstones, compactOrphans client_lookup.go read-only lookups (GetByID, List, EffectiveFlow, ...) client_link.go inbound association sync (SyncInbound, DetachInbound, ...) client_crud.go single-client CRUD + validation + protocol defaults client_inbound_apply.go low-level inbound-settings mutators + by-email setters client_bulk.go bulk attach/detach/adjust/delete/create + DelDepleted client_traffic.go traffic-reset paths client_groups.go client group management client_paging.go paged listing, filtering, sorting, summary Every declaration moved unchanged (verified: identical func/type/const/var signature set before vs after). Imports redistributed per file via goimports. go build ./..., go vet, and go test ./web/service/... all pass. * refactor(service): split inbound.go into focused files inbound.go was 4100 lines. Split it verbatim into cohesive same-package files (no behavior change): inbound.go core inbound CRUD + InboundService (keeps pkg doc) inbound_protocol.go protocol / stream capability helpers inbound_node.go node/runtime/remote coordination + online tracking inbound_traffic.go traffic accounting, reset, client stats inbound_client_ips.go per-client IP tracking inbound_clients.go client lookups within inbounds + copy-clients inbound_disable.go auto-disable invalid inbounds/clients inbound_migration.go DB migrations inbound_sublink.go subscription link providers inbound_util.go generic slice/string helpers Identical func/type/const/var signature set before vs after; package doc comment preserved on inbound.go. Imports redistributed via goimports. Build, vet, and go test ./web/service/... all pass. * refactor(service): split tgbot.go into focused files tgbot.go was 3738 lines dominated by a 1246-line answerCallback. Split it verbatim into cohesive same-package files (no behavior change): tgbot.go lifecycle, bot setup, caches, small utils tgbot_router.go incoming update / command / callback dispatch tgbot_send.go outbound messaging primitives tgbot_client.go client views, actions, subscription links tgbot_inbound.go inbound listing / pickers tgbot_report.go server usage, exhausted, online, backups, notifications Identical func/type/const/var signature set before vs after. Imports redistributed via goimports. Build, vet, and go test ./web/service/... pass. * refactor(client): dedupe single-field by-email setters ResetClientIpLimitByEmail, ResetClientExpiryTimeByEmail, and ResetClientTrafficLimitByEmail shared an identical ~50-line body that resolves the inbound by email, confirms the client exists, rewrites a single-client settings payload, and delegates to UpdateInboundClient. Extract that into applyClientFieldByEmail(inboundSvc, email, mutate) and reduce each setter to a 3-line wrapper. Behavior is unchanged: same checks and error strings, same single-client payload contract, same totalGB guard. SetClientTelegramUserID (resolves by traffic id, different error text) and ToggleClientEnableByEmail/SetClientEnableByEmail (different return shape and a pre-read of the old state) intentionally keep their own bodies. * refactor(service): extract panel/ subpackage Move the panel-administration leaf services out of the flat service package into web/service/panel/ (package panel): user.go UserService (auth / 2FA / LDAP) panel.go PanelService (restart / self-update) + version helpers panel_other.go non-unix RestartPanel panel_unix.go unix RestartPanel api_token.go ApiTokenService websocket.go WebSocketService panel_test.go version/shellQuote unit tests These are leaves: they depend on core (SettingService, Release) but no core file references them, so the extraction creates no import cycle. Core references are now qualified (service.SettingService, service.Release); callers in main.go, web/web.go, and web/controller/* updated to panel.*. Build, vet, and go test ./web/... pass. * refactor(service): extract integration/ subpackage Move the external-provider integration leaves into web/service/integration/ (package integration): warp.go WarpService (Cloudflare WARP) nord.go NordService (NordVPN) custom_geo.go CustomGeoService (custom geo asset management) *_test.go custom_geo / panel-proxy tests These depend on core (SettingService, ServerService, XraySettingService) but no core file references them. xray_setting.go stays in core because it calls the unexported SettingService.saveSetting. The shared isBlockedIP SSRF helper (used by core url_safety.go and by custom_geo) now has a small copy in each package rather than being exported. Core references qualified; callers in web/web.go, web/job/*, and web/controller/* updated to integration.*. Build, vet, and go test ./web/... pass. * refactor(service): extract tgbot/ subpackage Move the Telegram bot (6 files + test) into web/service/tgbot/ (package tgbot). It is a leaf: it embeds five core services (Inbound/Client/Setting/ Server/Xray) and the core never references it, so no import cycle. To support the package boundary without changing behavior: - core exposes XrayProcess() *xray.Process so tgbot keeps calling the exact same running-process methods it used via the package-level `p`; - three core methods tgbot calls are exported: ClientService.checkIs- EnabledByEmail -> CheckIsEnabledByEmail, InboundService.getAllEmails -> GetAllEmails (callers updated in-package); - tgbot's embedded-field types and the few core type refs (Status, ClientCreatePayload, SanitizePublicHTTPURL) are now service-qualified. Callers in main.go, web/web.go, web/job/*, and web/controller/* updated to tgbot.*. Build, vet, and go test ./web/... pass. * refactor(service): extract outbound/ subpackage OutboundService (outbound.go) imports only neutral packages (config, database, model, xray) and its production code is referenced by no core or sibling service file — only by web/controller/xray_setting.go and web/job/xray_traffic_job.go. Move it to web/service/outbound/ (package outbound); no core qualification needed inside. Callers updated to outbound.*. The one coupling was a tiny pure test helper, outboundsContainTag, used by both outbound.go and the core outbound_subscription_test.go; it now has a small copy in that test file rather than being shared across the boundary. Build, vet, and go test ./web/... pass. * refactor(util): move wireguard into its own subpackage util/wireguard.go was the lone file of the root `util` package (24 lines, one exported func GenerateWireguardKeypair), while every other util concern lives in a focused subpackage (util/common, util/crypto, util/netsafe, ...). Move it to util/wireguard/ (package wireguard) for consistency; its only importer, web/service/integration/warp.go, is updated. The root `util` package no longer exists. * refactor(sub): drop redundant sub prefix from filenames Inside package sub the subXxx.go prefix just repeats the package name (like client_*.go did inside service). Rename for consistency; content and type names are unchanged: subController.go -> controller.go subService.go -> service.go subClashService.go -> clash_service.go subJsonService.go -> json_service.go (+ matching _test.go files) * refactor(controller): rename xui.go -> spa.go XUIController serves the panel's single-page-app shell; spa.go names that role plainly (the other controller files are domain-named). File rename only — the type stays XUIController. api_docs_test.go keys route base paths by filename, so its "xui.go" case is updated to "spa.go". * refactor: move backend packages under internal/ Adopt the idiomatic Go application layout: the backend packages now live under internal/ (a boundary the toolchain enforces), signalling private implementation instead of a library-style flat root. No runtime behavior changes — only import paths and a few build/config paths move. Moved: config, database, logger, mtproto, sub, util, web, xray -> internal/. main.go stays at the repo root and tools/openapigen stays under tools/ (both still import internal/* because the internal rule keys off the module root). The module path github.com/mhsanaei/3x-ui/v3 is unchanged; 149 .go files had their import prefix rewritten to .../internal/<pkg>. Couplings the Go compiler can't see, updated to the new layout: - frontend i18n imports of web/translation (react.ts, setup.components.ts) - vite outDir + eslint/tsconfig ignore globs -> internal/web/dist - Dockerfile COPY paths for web/dist and web/translation - locale.go os.DirFS("web") disk fallback -> "internal/web" - .gitignore and ci.yml go:embed stub for internal/web/dist - api_docs_test.go repo-root relative walk (one level deeper) - tools/openapigen filesystem package paths; ApiTokenView repointed to the web/service/panel subpackage and codegen regenerated (clears a stale type the ci.yml codegen check was failing on) Verified: go build/vet/test (all packages), and frontend typecheck, lint, vitest (478 tests), and production build into internal/web/dist. * fix(config): keep test runs from writing logs into the source tree GetLogFolder() returns a CWD-relative "./log" on Windows. Under `go test` the working directory is each package's own folder, so InitLogger (called by tests in web/job, web/service, xray, web/websocket) created stray log/ directories scattered through the source tree (e.g. internal/web/job/log/). Redirect to a shared temp folder when testing.Testing() reports a test run. Production behavior is unchanged: Windows still uses ./log next to the binary and Linux /var/log/x-ui. The log files were always gitignored (*.log) and never committed; this just stops the noise at the source. * docs: move subscription-template guide out of root into docs/ sub_templates/ was a top-level folder holding only a README and no actual templates (3x-ui ships none by design), referenced nowhere and unlinked from any doc — it read like an empty placeholder cluttering the repo root. Move the guide to docs/custom-subscription-templates.md (a proper docs home), reword its intro to read as documentation rather than a folder note, link it from the Features list in README.md, and drop the empty sub_templates/ folder. * fix: update stale web/ path references after the internal/ move The internal/ migration rewrote Go import paths but left some references to the old top-level layout in docs, comments, and a few runtime disk paths. Functional (dev-mode only): the disk-serving fallbacks that read the Vite build from disk when running from source still pointed at web/dist/, which moved to internal/web/dist/ — so `os.DirFS`/`os.Stat`/`os.ReadFile` in internal/web/web.go and internal/sub/{sub,controller}.go are corrected. Production was unaffected (it serves the embedded FS; verified by the Docker build), but `go run` with a live frontend build silently fell back to embed. Docs/comments: frontend/README.md, CONTRIBUTING.md, the claude-issue-bot and release workflows, the openapigen -root help text, and assorted Go comments now reference internal/web, internal/database, internal/sub, internal/xray, etc. Package-name mentions (the "web" package), root paths (main.go, frontend/, install scripts, /etc/x-ui), routes (/panel/api/xray), and the historical "web/assets no longer exists" note were intentionally left as-is. * refactor(web): remove the legacy /xui -> /panel redirect middleware RedirectMiddleware existed only for backward compatibility with the old `/xui` URL scheme (301-redirecting /xui and /xui/API to /panel and /panel/api). That cutover was long ago, so drop the middleware, its registration in initRouter, and the now-inaccurate "URL redirection" mention in the middleware package doc. Old /xui URLs now 404 like any other unknown path. HTTPS auto-redirect and auth redirects are unrelated and stay. * build: fix .dockerignore for internal/ layout and exclude runtime dir - web/dist -> internal/web/dist: the embedded frontend moved under internal/, so the stale exclude no longer matched and the locally-built dist could be sent to the build context (the frontend stage rebuilds it fresh anyway). - exclude x-ui/: the local runtime directory (SQLite db, geo .dat files, xray binaries, certs — ~150MB) was being shipped into the build context for no reason. Verified the pattern excludes only the directory and still keeps x-ui.sh, which the Dockerfile copies to /usr/bin/x-ui.	2026-06-10 15:19:22 +02:00