mirror of
https://github.com/krahets/hello-algo.git
synced 2026-08-23 16:47:13 +00:00
build
This commit is contained in:
krahets
@@ -0,0 +1,761 @@
|
||||
---
|
||||
comments: true
|
||||
---
|
||||
|
||||
# 10.1 Binary search
|
||||
|
||||
<u>Binary search</u> is an efficient search algorithm based on the divide-and-conquer strategy. It utilizes the orderliness of data, reducing the search range by half each round until the target element is found or the search interval is empty.
|
||||
|
||||
!!! question
|
||||
|
||||
Given an array `nums` of length $n$, with elements arranged in ascending order and non-repeating. Please find and return the index of element `target` in this array. If the array does not contain the element, return $-1$. An example is shown below.
|
||||
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-1 Binary search example data </p>
|
||||
|
||||
As shown in the Figure 10-2 , we first initialize pointers $i = 0$ and $j = n - 1$, pointing to the first and last elements of the array, representing the search interval $[0, n - 1]$. Please note that square brackets indicate a closed interval, which includes the boundary values themselves.
|
||||
|
||||
Next, perform the following two steps in a loop.
|
||||
|
||||
1. Calculate the midpoint index $m = \lfloor {(i + j) / 2} \rfloor$, where $\lfloor \: \rfloor$ denotes the floor operation.
|
||||
2. Compare the size of `nums[m]` and `target`, divided into the following three scenarios.
|
||||
1. If `nums[m] < target`, it indicates that `target` is in the interval $[m + 1, j]$, thus set $i = m + 1$.
|
||||
2. If `nums[m] > target`, it indicates that `target` is in the interval $[i, m - 1]$, thus set $j = m - 1$.
|
||||
3. If `nums[m] = target`, it indicates that `target` is found, thus return index $m$.
|
||||
|
||||
If the array does not contain the target element, the search interval will eventually reduce to empty. In this case, return $-1$.
|
||||
|
||||
=== "<1>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<2>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<3>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<4>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<5>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<6>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<7>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-2 Binary search process </p>
|
||||
|
||||
It's worth noting that since $i$ and $j$ are both of type `int`, **$i + j$ might exceed the range of `int` type**. To avoid large number overflow, we usually use the formula $m = \lfloor {i + (j - i) / 2} \rfloor$ to calculate the midpoint.
|
||||
|
||||
The code is as follows:
|
||||
|
||||
=== "Python"
|
||||
|
||||
```python title="binary_search.py"
|
||||
def binary_search(nums: list[int], target: int) -> int:
|
||||
"""二分查找（双闭区间）"""
|
||||
# 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
i, j = 0, len(nums) - 1
|
||||
# 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while i <= j:
|
||||
# 理论上 Python 的数字可以无限大（取决于内存大小），无须考虑大数越界问题
|
||||
m = (i + j) // 2 # 计算中点索引 m
|
||||
if nums[m] < target:
|
||||
i = m + 1 # 此情况说明 target 在区间 [m+1, j] 中
|
||||
elif nums[m] > target:
|
||||
j = m - 1 # 此情况说明 target 在区间 [i, m-1] 中
|
||||
else:
|
||||
return m # 找到目标元素，返回其索引
|
||||
return -1 # 未找到目标元素，返回 -1
|
||||
```
|
||||
|
||||
=== "C++"
|
||||
|
||||
```cpp title="binary_search.cpp"
|
||||
/* 二分查找（双闭区间） */
|
||||
int binarySearch(vector<int> &nums, int target) {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
int i = 0, j = nums.size() - 1;
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) // 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1;
|
||||
else if (nums[m] > target) // 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1;
|
||||
else // 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Java"
|
||||
|
||||
```java title="binary_search.java"
|
||||
/* 二分查找（双闭区间） */
|
||||
int binarySearch(int[] nums, int target) {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
int i = 0, j = nums.length - 1;
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) // 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1;
|
||||
else if (nums[m] > target) // 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1;
|
||||
else // 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "C#"
|
||||
|
||||
```csharp title="binary_search.cs"
|
||||
/* 二分查找（双闭区间） */
|
||||
int BinarySearch(int[] nums, int target) {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
int i = 0, j = nums.Length - 1;
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) // 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1;
|
||||
else if (nums[m] > target) // 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1;
|
||||
else // 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Go"
|
||||
|
||||
```go title="binary_search.go"
|
||||
/* 二分查找（双闭区间） */
|
||||
func binarySearch(nums []int, target int) int {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
i, j := 0, len(nums)-1
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
for i <= j {
|
||||
m := i + (j-i)/2 // 计算中点索引 m
|
||||
if nums[m] < target { // 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1
|
||||
} else if nums[m] > target { // 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1
|
||||
} else { // 找到目标元素，返回其索引
|
||||
return m
|
||||
}
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1
|
||||
}
|
||||
```
|
||||
|
||||
=== "Swift"
|
||||
|
||||
```swift title="binary_search.swift"
|
||||
/* 二分查找（双闭区间） */
|
||||
func binarySearch(nums: [Int], target: Int) -> Int {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
var i = nums.startIndex
|
||||
var j = nums.endIndex - 1
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while i <= j {
|
||||
let m = i + (j - i) / 2 // 计算中点索引 m
|
||||
if nums[m] < target { // 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1
|
||||
} else if nums[m] > target { // 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1
|
||||
} else { // 找到目标元素，返回其索引
|
||||
return m
|
||||
}
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1
|
||||
}
|
||||
```
|
||||
|
||||
=== "JS"
|
||||
|
||||
```javascript title="binary_search.js"
|
||||
/* 二分查找（双闭区间） */
|
||||
function binarySearch(nums, target) {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
let i = 0,
|
||||
j = nums.length - 1;
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while (i <= j) {
|
||||
// 计算中点索引 m ，使用 parseInt() 向下取整
|
||||
const m = parseInt(i + (j - i) / 2);
|
||||
if (nums[m] < target)
|
||||
// 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1;
|
||||
else if (nums[m] > target)
|
||||
// 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1;
|
||||
else return m; // 找到目标元素，返回其索引
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "TS"
|
||||
|
||||
```typescript title="binary_search.ts"
|
||||
/* 二分查找（双闭区间） */
|
||||
function binarySearch(nums: number[], target: number): number {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
let i = 0,
|
||||
j = nums.length - 1;
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while (i <= j) {
|
||||
// 计算中点索引 m
|
||||
const m = Math.floor(i + (j - i) / 2);
|
||||
if (nums[m] < target) {
|
||||
// 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1;
|
||||
} else if (nums[m] > target) {
|
||||
// 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1;
|
||||
} else {
|
||||
// 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
}
|
||||
return -1; // 未找到目标元素，返回 -1
|
||||
}
|
||||
```
|
||||
|
||||
=== "Dart"
|
||||
|
||||
```dart title="binary_search.dart"
|
||||
/* 二分查找（双闭区间） */
|
||||
int binarySearch(List<int> nums, int target) {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
int i = 0, j = nums.length - 1;
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) ~/ 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
// 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1;
|
||||
} else if (nums[m] > target) {
|
||||
// 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1;
|
||||
} else {
|
||||
// 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Rust"
|
||||
|
||||
```rust title="binary_search.rs"
|
||||
/* 二分查找（双闭区间） */
|
||||
fn binary_search(nums: &[i32], target: i32) -> i32 {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
let mut i = 0;
|
||||
let mut j = nums.len() as i32 - 1;
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while i <= j {
|
||||
let m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if nums[m as usize] < target {
|
||||
// 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1;
|
||||
} else if nums[m as usize] > target {
|
||||
// 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1;
|
||||
} else {
|
||||
// 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "C"
|
||||
|
||||
```c title="binary_search.c"
|
||||
/* 二分查找（双闭区间） */
|
||||
int binarySearch(int *nums, int len, int target) {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
int i = 0, j = len - 1;
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) // 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1;
|
||||
else if (nums[m] > target) // 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1;
|
||||
else // 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Kotlin"
|
||||
|
||||
```kotlin title="binary_search.kt"
|
||||
/* 二分查找（双闭区间） */
|
||||
fun binarySearch(nums: IntArray, target: Int): Int {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
var i = 0
|
||||
var j = nums.size - 1
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while (i <= j) {
|
||||
val m = i + (j - i) / 2 // 计算中点索引 m
|
||||
if (nums[m] < target) // 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1
|
||||
else if (nums[m] > target) // 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1
|
||||
else // 找到目标元素，返回其索引
|
||||
return m
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1
|
||||
}
|
||||
```
|
||||
|
||||
=== "Ruby"
|
||||
|
||||
```ruby title="binary_search.rb"
|
||||
### 二分查找（双闭区间） ###
|
||||
def binary_search(nums, target)
|
||||
# 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
i, j = 0, nums.length - 1
|
||||
|
||||
# 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while i <= j
|
||||
# 理论上 Ruby 的数字可以无限大（取决于内存大小），无须考虑大数越界问题
|
||||
m = (i + j) / 2 # 计算中点索引 m
|
||||
|
||||
if nums[m] < target
|
||||
i = m + 1 # 此情况说明 target 在区间 [m+1, j] 中
|
||||
elsif nums[m] > target
|
||||
j = m - 1 # 此情况说明 target 在区间 [i, m-1] 中
|
||||
else
|
||||
return m # 找到目标元素，返回其索引
|
||||
end
|
||||
end
|
||||
|
||||
-1 # 未找到目标元素，返回 -1
|
||||
end
|
||||
```
|
||||
|
||||
=== "Zig"
|
||||
|
||||
```zig title="binary_search.zig"
|
||||
// 二分查找（双闭区间）
|
||||
fn binarySearch(comptime T: type, nums: std.ArrayList(T), target: T) T {
|
||||
// 初始化双闭区间 [0, n-1] ，即 i, j 分别指向数组首元素、尾元素
|
||||
var i: usize = 0;
|
||||
var j: usize = nums.items.len - 1;
|
||||
// 循环，当搜索区间为空时跳出（当 i > j 时为空）
|
||||
while (i <= j) {
|
||||
var m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums.items[m] < target) { // 此情况说明 target 在区间 [m+1, j] 中
|
||||
i = m + 1;
|
||||
} else if (nums.items[m] > target) { // 此情况说明 target 在区间 [i, m-1] 中
|
||||
j = m - 1;
|
||||
} else { // 找到目标元素，返回其索引
|
||||
return @intCast(m);
|
||||
}
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
??? pythontutor "Code Visualization"
|
||||
|
||||
<div style="height: 549px; width: 100%;"><iframe class="pythontutor-iframe" src="https://pythontutor.com/iframe-embed.html#code=def%20binary_search%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%EF%BC%88%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%EF%BC%89%22%22%22%0A%20%20%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%20%5B0,%20n-1%5D%20%EF%BC%8C%E5%8D%B3%20i,%20j%20%E5%88%86%E5%88%AB%E6%8C%87%E5%90%91%E6%95%B0%E7%BB%84%E9%A6%96%E5%85%83%E7%B4%A0%E3%80%81%E5%B0%BE%E5%85%83%E7%B4%A0%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%20-%201%0A%20%20%20%20%23%20%E5%BE%AA%E7%8E%AF%EF%BC%8C%E5%BD%93%E6%90%9C%E7%B4%A2%E5%8C%BA%E9%97%B4%E4%B8%BA%E7%A9%BA%E6%97%B6%E8%B7%B3%E5%87%BA%EF%BC%88%E5%BD%93%20i%20%3E%20j%20%E6%97%B6%E4%B8%BA%E7%A9%BA%EF%BC%89%0A%20%20%20%20while%20i%20%3C%3D%20j%3A%0A%20%20%20%20%20%20%20%20%23%20%E7%90%86%E8%AE%BA%E4%B8%8A%20Python%20%E7%9A%84%E6%95%B0%E5%AD%97%E5%8F%AF%E4%BB%A5%E6%97%A0%E9%99%90%E5%A4%A7%EF%BC%88%E5%8F%96%E5%86%B3%E4%BA%8E%E5%86%85%E5%AD%98%E5%A4%A7%E5%B0%8F%EF%BC%89%EF%BC%8C%E6%97%A0%E9%A1%BB%E8%80%83%E8%99%91%E5%A4%A7%E6%95%B0%E8%B6%8A%E7%95%8C%E9%97%AE%E9%A2%98%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20%E6%AD%A4%E6%83%85%E5%86%B5%E8%AF%B4%E6%98%8E%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20%E6%AD%A4%E6%83%85%E5%86%B5%E8%AF%B4%E6%98%8E%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20return%20m%20%20%23%20%E6%89%BE%E5%88%B0%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%EF%BC%8C%E8%BF%94%E5%9B%9E%E5%85%B6%E7%B4%A2%E5%BC%95%0A%20%20%20%20return%20-1%20%20%23%20%E6%9C%AA%E6%89%BE%E5%88%B0%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%EF%BC%8C%E8%BF%94%E5%9B%9E%20-1%0A%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%208,%2012,%2015,%2023,%2026,%2031,%2035%5D%0A%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%EF%BC%88%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%EF%BC%89%0A%20%20%20%20index%20%3D%20binary_search%28nums,%20target%29%0A%20%20%20%20print%28%22%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%206%20%E7%9A%84%E7%B4%A2%E5%BC%95%20%3D%20%22,%20index%29&codeDivHeight=472&codeDivWidth=350&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false"> </iframe></div>
|
||||
<div style="margin-top: 5px;"><a href="https://pythontutor.com/iframe-embed.html#code=def%20binary_search%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%EF%BC%88%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%EF%BC%89%22%22%22%0A%20%20%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%20%5B0,%20n-1%5D%20%EF%BC%8C%E5%8D%B3%20i,%20j%20%E5%88%86%E5%88%AB%E6%8C%87%E5%90%91%E6%95%B0%E7%BB%84%E9%A6%96%E5%85%83%E7%B4%A0%E3%80%81%E5%B0%BE%E5%85%83%E7%B4%A0%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%20-%201%0A%20%20%20%20%23%20%E5%BE%AA%E7%8E%AF%EF%BC%8C%E5%BD%93%E6%90%9C%E7%B4%A2%E5%8C%BA%E9%97%B4%E4%B8%BA%E7%A9%BA%E6%97%B6%E8%B7%B3%E5%87%BA%EF%BC%88%E5%BD%93%20i%20%3E%20j%20%E6%97%B6%E4%B8%BA%E7%A9%BA%EF%BC%89%0A%20%20%20%20while%20i%20%3C%3D%20j%3A%0A%20%20%20%20%20%20%20%20%23%20%E7%90%86%E8%AE%BA%E4%B8%8A%20Python%20%E7%9A%84%E6%95%B0%E5%AD%97%E5%8F%AF%E4%BB%A5%E6%97%A0%E9%99%90%E5%A4%A7%EF%BC%88%E5%8F%96%E5%86%B3%E4%BA%8E%E5%86%85%E5%AD%98%E5%A4%A7%E5%B0%8F%EF%BC%89%EF%BC%8C%E6%97%A0%E9%A1%BB%E8%80%83%E8%99%91%E5%A4%A7%E6%95%B0%E8%B6%8A%E7%95%8C%E9%97%AE%E9%A2%98%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20%E6%AD%A4%E6%83%85%E5%86%B5%E8%AF%B4%E6%98%8E%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20%E6%AD%A4%E6%83%85%E5%86%B5%E8%AF%B4%E6%98%8E%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20return%20m%20%20%23%20%E6%89%BE%E5%88%B0%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%EF%BC%8C%E8%BF%94%E5%9B%9E%E5%85%B6%E7%B4%A2%E5%BC%95%0A%20%20%20%20return%20-1%20%20%23%20%E6%9C%AA%E6%89%BE%E5%88%B0%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%EF%BC%8C%E8%BF%94%E5%9B%9E%20-1%0A%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%208,%2012,%2015,%2023,%2026,%2031,%2035%5D%0A%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%EF%BC%88%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%EF%BC%89%0A%20%20%20%20index%20%3D%20binary_search%28nums,%20target%29%0A%20%20%20%20print%28%22%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%206%20%E7%9A%84%E7%B4%A2%E5%BC%95%20%3D%20%22,%20index%29&codeDivHeight=800&codeDivWidth=600&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false" target="_blank" rel="noopener noreferrer">Full Screen ></a></div>
|
||||
|
||||
**Time complexity is $O(\log n)$** : In the binary loop, the interval reduces by half each round, hence the number of iterations is $\log_2 n$.
|
||||
|
||||
**Space complexity is $O(1)$** : Pointers $i$ and $j$ use constant size space.
|
||||
|
||||
## 10.1.1 Interval representation methods
|
||||
|
||||
Besides the aforementioned closed interval, a common interval representation is the "left-closed right-open" interval, defined as $[0, n)$, where the left boundary includes itself, and the right boundary does not include itself. In this representation, the interval $[i, j)$ is empty when $i = j$.
|
||||
|
||||
We can implement a binary search algorithm with the same functionality based on this representation:
|
||||
|
||||
=== "Python"
|
||||
|
||||
```python title="binary_search.py"
|
||||
def binary_search_lcro(nums: list[int], target: int) -> int:
|
||||
"""二分查找（左闭右开区间）"""
|
||||
# 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
i, j = 0, len(nums)
|
||||
# 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while i < j:
|
||||
m = (i + j) // 2 # 计算中点索引 m
|
||||
if nums[m] < target:
|
||||
i = m + 1 # 此情况说明 target 在区间 [m+1, j) 中
|
||||
elif nums[m] > target:
|
||||
j = m # 此情况说明 target 在区间 [i, m) 中
|
||||
else:
|
||||
return m # 找到目标元素，返回其索引
|
||||
return -1 # 未找到目标元素，返回 -1
|
||||
```
|
||||
|
||||
=== "C++"
|
||||
|
||||
```cpp title="binary_search.cpp"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
int binarySearchLCRO(vector<int> &nums, int target) {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
int i = 0, j = nums.size();
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while (i < j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) // 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1;
|
||||
else if (nums[m] > target) // 此情况说明 target 在区间 [i, m) 中
|
||||
j = m;
|
||||
else // 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Java"
|
||||
|
||||
```java title="binary_search.java"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
int binarySearchLCRO(int[] nums, int target) {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
int i = 0, j = nums.length;
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while (i < j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) // 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1;
|
||||
else if (nums[m] > target) // 此情况说明 target 在区间 [i, m) 中
|
||||
j = m;
|
||||
else // 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "C#"
|
||||
|
||||
```csharp title="binary_search.cs"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
int BinarySearchLCRO(int[] nums, int target) {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
int i = 0, j = nums.Length;
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while (i < j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) // 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1;
|
||||
else if (nums[m] > target) // 此情况说明 target 在区间 [i, m) 中
|
||||
j = m;
|
||||
else // 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Go"
|
||||
|
||||
```go title="binary_search.go"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
func binarySearchLCRO(nums []int, target int) int {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
i, j := 0, len(nums)
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
for i < j {
|
||||
m := i + (j-i)/2 // 计算中点索引 m
|
||||
if nums[m] < target { // 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1
|
||||
} else if nums[m] > target { // 此情况说明 target 在区间 [i, m) 中
|
||||
j = m
|
||||
} else { // 找到目标元素，返回其索引
|
||||
return m
|
||||
}
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1
|
||||
}
|
||||
```
|
||||
|
||||
=== "Swift"
|
||||
|
||||
```swift title="binary_search.swift"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
func binarySearchLCRO(nums: [Int], target: Int) -> Int {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
var i = nums.startIndex
|
||||
var j = nums.endIndex
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while i < j {
|
||||
let m = i + (j - i) / 2 // 计算中点索引 m
|
||||
if nums[m] < target { // 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1
|
||||
} else if nums[m] > target { // 此情况说明 target 在区间 [i, m) 中
|
||||
j = m
|
||||
} else { // 找到目标元素，返回其索引
|
||||
return m
|
||||
}
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1
|
||||
}
|
||||
```
|
||||
|
||||
=== "JS"
|
||||
|
||||
```javascript title="binary_search.js"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
function binarySearchLCRO(nums, target) {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
let i = 0,
|
||||
j = nums.length;
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while (i < j) {
|
||||
// 计算中点索引 m ，使用 parseInt() 向下取整
|
||||
const m = parseInt(i + (j - i) / 2);
|
||||
if (nums[m] < target)
|
||||
// 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1;
|
||||
else if (nums[m] > target)
|
||||
// 此情况说明 target 在区间 [i, m) 中
|
||||
j = m;
|
||||
// 找到目标元素，返回其索引
|
||||
else return m;
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "TS"
|
||||
|
||||
```typescript title="binary_search.ts"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
function binarySearchLCRO(nums: number[], target: number): number {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
let i = 0,
|
||||
j = nums.length;
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while (i < j) {
|
||||
// 计算中点索引 m
|
||||
const m = Math.floor(i + (j - i) / 2);
|
||||
if (nums[m] < target) {
|
||||
// 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1;
|
||||
} else if (nums[m] > target) {
|
||||
// 此情况说明 target 在区间 [i, m) 中
|
||||
j = m;
|
||||
} else {
|
||||
// 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
}
|
||||
return -1; // 未找到目标元素，返回 -1
|
||||
}
|
||||
```
|
||||
|
||||
=== "Dart"
|
||||
|
||||
```dart title="binary_search.dart"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
int binarySearchLCRO(List<int> nums, int target) {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
int i = 0, j = nums.length;
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while (i < j) {
|
||||
int m = i + (j - i) ~/ 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
// 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1;
|
||||
} else if (nums[m] > target) {
|
||||
// 此情况说明 target 在区间 [i, m) 中
|
||||
j = m;
|
||||
} else {
|
||||
// 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Rust"
|
||||
|
||||
```rust title="binary_search.rs"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
fn binary_search_lcro(nums: &[i32], target: i32) -> i32 {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
let mut i = 0;
|
||||
let mut j = nums.len() as i32;
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while i < j {
|
||||
let m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if nums[m as usize] < target {
|
||||
// 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1;
|
||||
} else if nums[m as usize] > target {
|
||||
// 此情况说明 target 在区间 [i, m) 中
|
||||
j = m;
|
||||
} else {
|
||||
// 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "C"
|
||||
|
||||
```c title="binary_search.c"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
int binarySearchLCRO(int *nums, int len, int target) {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
int i = 0, j = len;
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while (i < j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) // 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1;
|
||||
else if (nums[m] > target) // 此情况说明 target 在区间 [i, m) 中
|
||||
j = m;
|
||||
else // 找到目标元素，返回其索引
|
||||
return m;
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Kotlin"
|
||||
|
||||
```kotlin title="binary_search.kt"
|
||||
/* 二分查找（左闭右开区间） */
|
||||
fun binarySearchLCRO(nums: IntArray, target: Int): Int {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
var i = 0
|
||||
var j = nums.size
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while (i < j) {
|
||||
val m = i + (j - i) / 2 // 计算中点索引 m
|
||||
if (nums[m] < target) // 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1
|
||||
else if (nums[m] > target) // 此情况说明 target 在区间 [i, m) 中
|
||||
j = m
|
||||
else // 找到目标元素，返回其索引
|
||||
return m
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1
|
||||
}
|
||||
```
|
||||
|
||||
=== "Ruby"
|
||||
|
||||
```ruby title="binary_search.rb"
|
||||
### 二分查找（左闭右开区间） ###
|
||||
def binary_search_lcro(nums, target)
|
||||
# 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
i, j = 0, nums.length
|
||||
|
||||
# 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while i < j
|
||||
# 计算中点索引 m
|
||||
m = (i + j) / 2
|
||||
|
||||
if nums[m] < target
|
||||
i = m + 1 # 此情况说明 target 在区间 [m+1, j) 中
|
||||
elsif nums[m] > target
|
||||
j = m - 1 # 此情况说明 target 在区间 [i, m) 中
|
||||
else
|
||||
return m # 找到目标元素，返回其索引
|
||||
end
|
||||
end
|
||||
|
||||
-1 # 未找到目标元素，返回 -1
|
||||
end
|
||||
```
|
||||
|
||||
=== "Zig"
|
||||
|
||||
```zig title="binary_search.zig"
|
||||
// 二分查找（左闭右开区间）
|
||||
fn binarySearchLCRO(comptime T: type, nums: std.ArrayList(T), target: T) T {
|
||||
// 初始化左闭右开区间 [0, n) ，即 i, j 分别指向数组首元素、尾元素+1
|
||||
var i: usize = 0;
|
||||
var j: usize = nums.items.len;
|
||||
// 循环，当搜索区间为空时跳出（当 i = j 时为空）
|
||||
while (i <= j) {
|
||||
var m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums.items[m] < target) { // 此情况说明 target 在区间 [m+1, j) 中
|
||||
i = m + 1;
|
||||
} else if (nums.items[m] > target) { // 此情况说明 target 在区间 [i, m) 中
|
||||
j = m;
|
||||
} else { // 找到目标元素，返回其索引
|
||||
return @intCast(m);
|
||||
}
|
||||
}
|
||||
// 未找到目标元素，返回 -1
|
||||
return -1;
|
||||
}
|
||||
```
|
||||
|
||||
??? pythontutor "Code Visualization"
|
||||
|
||||
<div style="height: 549px; width: 100%;"><iframe class="pythontutor-iframe" src="https://pythontutor.com/iframe-embed.html#code=def%20binary_search_lcro%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%EF%BC%88%E5%B7%A6%E9%97%AD%E5%8F%B3%E5%BC%80%E5%8C%BA%E9%97%B4%EF%BC%89%22%22%22%0A%20%20%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%B7%A6%E9%97%AD%E5%8F%B3%E5%BC%80%E5%8C%BA%E9%97%B4%20%5B0,%20n%29%20%EF%BC%8C%E5%8D%B3%20i,%20j%20%E5%88%86%E5%88%AB%E6%8C%87%E5%90%91%E6%95%B0%E7%BB%84%E9%A6%96%E5%85%83%E7%B4%A0%E3%80%81%E5%B0%BE%E5%85%83%E7%B4%A0%2B1%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%0A%20%20%20%20%23%20%E5%BE%AA%E7%8E%AF%EF%BC%8C%E5%BD%93%E6%90%9C%E7%B4%A2%E5%8C%BA%E9%97%B4%E4%B8%BA%E7%A9%BA%E6%97%B6%E8%B7%B3%E5%87%BA%EF%BC%88%E5%BD%93%20i%20%3D%20j%20%E6%97%B6%E4%B8%BA%E7%A9%BA%EF%BC%89%0A%20%20%20%20while%20i%20%3C%20j%3A%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20%E6%AD%A4%E6%83%85%E5%86%B5%E8%AF%B4%E6%98%8E%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%29%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20%20%23%20%E6%AD%A4%E6%83%85%E5%86%B5%E8%AF%B4%E6%98%8E%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m%29%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20return%20m%20%20%23%20%E6%89%BE%E5%88%B0%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%EF%BC%8C%E8%BF%94%E5%9B%9E%E5%85%B6%E7%B4%A2%E5%BC%95%0A%20%20%20%20return%20-1%20%20%23%20%E6%9C%AA%E6%89%BE%E5%88%B0%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%EF%BC%8C%E8%BF%94%E5%9B%9E%20-1%0A%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%208,%2012,%2015,%2023,%2026,%2031,%2035%5D%0A%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%EF%BC%88%E5%B7%A6%E9%97%AD%E5%8F%B3%E5%BC%80%E5%8C%BA%E9%97%B4%EF%BC%89%0A%20%20%20%20index%20%3D%20binary_search_lcro%28nums,%20target%29%0A%20%20%20%20print%28%22%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%206%20%E7%9A%84%E7%B4%A2%E5%BC%95%20%3D%20%22,%20index%29&codeDivHeight=472&codeDivWidth=350&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false"> </iframe></div>
|
||||
<div style="margin-top: 5px;"><a href="https://pythontutor.com/iframe-embed.html#code=def%20binary_search_lcro%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%EF%BC%88%E5%B7%A6%E9%97%AD%E5%8F%B3%E5%BC%80%E5%8C%BA%E9%97%B4%EF%BC%89%22%22%22%0A%20%20%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%B7%A6%E9%97%AD%E5%8F%B3%E5%BC%80%E5%8C%BA%E9%97%B4%20%5B0,%20n%29%20%EF%BC%8C%E5%8D%B3%20i,%20j%20%E5%88%86%E5%88%AB%E6%8C%87%E5%90%91%E6%95%B0%E7%BB%84%E9%A6%96%E5%85%83%E7%B4%A0%E3%80%81%E5%B0%BE%E5%85%83%E7%B4%A0%2B1%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%0A%20%20%20%20%23%20%E5%BE%AA%E7%8E%AF%EF%BC%8C%E5%BD%93%E6%90%9C%E7%B4%A2%E5%8C%BA%E9%97%B4%E4%B8%BA%E7%A9%BA%E6%97%B6%E8%B7%B3%E5%87%BA%EF%BC%88%E5%BD%93%20i%20%3D%20j%20%E6%97%B6%E4%B8%BA%E7%A9%BA%EF%BC%89%0A%20%20%20%20while%20i%20%3C%20j%3A%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20%E6%AD%A4%E6%83%85%E5%86%B5%E8%AF%B4%E6%98%8E%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%29%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20%20%23%20%E6%AD%A4%E6%83%85%E5%86%B5%E8%AF%B4%E6%98%8E%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m%29%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20return%20m%20%20%23%20%E6%89%BE%E5%88%B0%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%EF%BC%8C%E8%BF%94%E5%9B%9E%E5%85%B6%E7%B4%A2%E5%BC%95%0A%20%20%20%20return%20-1%20%20%23%20%E6%9C%AA%E6%89%BE%E5%88%B0%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%EF%BC%8C%E8%BF%94%E5%9B%9E%20-1%0A%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%208,%2012,%2015,%2023,%2026,%2031,%2035%5D%0A%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%EF%BC%88%E5%B7%A6%E9%97%AD%E5%8F%B3%E5%BC%80%E5%8C%BA%E9%97%B4%EF%BC%89%0A%20%20%20%20index%20%3D%20binary_search_lcro%28nums,%20target%29%0A%20%20%20%20print%28%22%E7%9B%AE%E6%A0%87%E5%85%83%E7%B4%A0%206%20%E7%9A%84%E7%B4%A2%E5%BC%95%20%3D%20%22,%20index%29&codeDivHeight=800&codeDivWidth=600&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false" target="_blank" rel="noopener noreferrer">Full Screen ></a></div>
|
||||
|
||||
As shown in the Figure 10-3 , in the two types of interval representations, the initialization of the binary search algorithm, the loop condition, and the narrowing interval operation are different.
|
||||
|
||||
Since both boundaries in the "closed interval" representation are defined as closed, the operations to narrow the interval through pointers $i$ and $j$ are also symmetrical. This makes it less prone to errors, **therefore, it is generally recommended to use the "closed interval" approach**.
|
||||
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-3 Two types of interval definitions </p>
|
||||
|
||||
## 10.1.2 Advantages and limitations
|
||||
|
||||
Binary search performs well in both time and space aspects.
|
||||
|
||||
- Binary search is time-efficient. With large data volumes, the logarithmic time complexity has a significant advantage. For instance, when the data size $n = 2^{20}$, linear search requires $2^{20} = 1048576$ iterations, while binary search only requires $\log_2 2^{20} = 20$ iterations.
|
||||
- Binary search does not require extra space. Compared to search algorithms that rely on additional space (like hash search), binary search is more space-efficient.
|
||||
|
||||
However, binary search is not suitable for all situations, mainly for the following reasons.
|
||||
|
||||
- Binary search is only applicable to ordered data. If the input data is unordered, it is not worth sorting it just to use binary search, as sorting algorithms typically have a time complexity of $O(n \log n)$, which is higher than both linear and binary search. For scenarios with frequent element insertion to maintain array order, inserting elements into specific positions has a time complexity of $O(n)$, which is also quite costly.
|
||||
- Binary search is only applicable to arrays. Binary search requires non-continuous (jumping) element access, which is inefficient in linked lists, thus not suitable for use in linked lists or data structures based on linked lists.
|
||||
- With small data volumes, linear search performs better. In linear search, each round only requires 1 decision operation; whereas in binary search, it involves 1 addition, 1 division, 1 to 3 decision operations, 1 addition (subtraction), totaling 4 to 6 operations; therefore, when data volume $n$ is small, linear search can be faster than binary search.
|
||||
@@ -0,0 +1,515 @@
|
||||
---
|
||||
comments: true
|
||||
---
|
||||
|
||||
# 10.3 Binary search boundaries
|
||||
|
||||
## 10.3.1 Find the left boundary
|
||||
|
||||
!!! question
|
||||
|
||||
Given a sorted array `nums` of length $n$, which may contain duplicate elements, return the index of the leftmost element `target`. If the element is not present in the array, return $-1$.
|
||||
|
||||
Recall the method of binary search for an insertion point, after the search is completed, $i$ points to the leftmost `target`, **thus searching for the insertion point is essentially searching for the index of the leftmost `target`**.
|
||||
|
||||
Consider implementing the search for the left boundary using the function for finding an insertion point. Note that the array might not contain `target`, which could lead to the following two results:
|
||||
|
||||
- The index $i$ of the insertion point is out of bounds.
|
||||
- The element `nums[i]` is not equal to `target`.
|
||||
|
||||
In these cases, simply return $-1$. The code is as follows:
|
||||
|
||||
=== "Python"
|
||||
|
||||
```python title="binary_search_edge.py"
|
||||
def binary_search_left_edge(nums: list[int], target: int) -> int:
|
||||
"""二分查找最左一个 target"""
|
||||
# 等价于查找 target 的插入点
|
||||
i = binary_search_insertion(nums, target)
|
||||
# 未找到 target ，返回 -1
|
||||
if i == len(nums) or nums[i] != target:
|
||||
return -1
|
||||
# 找到 target ，返回索引 i
|
||||
return i
|
||||
```
|
||||
|
||||
=== "C++"
|
||||
|
||||
```cpp title="binary_search_edge.cpp"
|
||||
/* 二分查找最左一个 target */
|
||||
int binarySearchLeftEdge(vector<int> &nums, int target) {
|
||||
// 等价于查找 target 的插入点
|
||||
int i = binarySearchInsertion(nums, target);
|
||||
// 未找到 target ，返回 -1
|
||||
if (i == nums.size() || nums[i] != target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Java"
|
||||
|
||||
```java title="binary_search_edge.java"
|
||||
/* 二分查找最左一个 target */
|
||||
int binarySearchLeftEdge(int[] nums, int target) {
|
||||
// 等价于查找 target 的插入点
|
||||
int i = binary_search_insertion.binarySearchInsertion(nums, target);
|
||||
// 未找到 target ，返回 -1
|
||||
if (i == nums.length || nums[i] != target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "C#"
|
||||
|
||||
```csharp title="binary_search_edge.cs"
|
||||
/* 二分查找最左一个 target */
|
||||
int BinarySearchLeftEdge(int[] nums, int target) {
|
||||
// 等价于查找 target 的插入点
|
||||
int i = binary_search_insertion.BinarySearchInsertion(nums, target);
|
||||
// 未找到 target ，返回 -1
|
||||
if (i == nums.Length || nums[i] != target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Go"
|
||||
|
||||
```go title="binary_search_edge.go"
|
||||
/* 二分查找最左一个 target */
|
||||
func binarySearchLeftEdge(nums []int, target int) int {
|
||||
// 等价于查找 target 的插入点
|
||||
i := binarySearchInsertion(nums, target)
|
||||
// 未找到 target ，返回 -1
|
||||
if i == len(nums) || nums[i] != target {
|
||||
return -1
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
return i
|
||||
}
|
||||
```
|
||||
|
||||
=== "Swift"
|
||||
|
||||
```swift title="binary_search_edge.swift"
|
||||
/* 二分查找最左一个 target */
|
||||
func binarySearchLeftEdge(nums: [Int], target: Int) -> Int {
|
||||
// 等价于查找 target 的插入点
|
||||
let i = binarySearchInsertion(nums: nums, target: target)
|
||||
// 未找到 target ，返回 -1
|
||||
if i == nums.endIndex || nums[i] != target {
|
||||
return -1
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
return i
|
||||
}
|
||||
```
|
||||
|
||||
=== "JS"
|
||||
|
||||
```javascript title="binary_search_edge.js"
|
||||
/* 二分查找最左一个 target */
|
||||
function binarySearchLeftEdge(nums, target) {
|
||||
// 等价于查找 target 的插入点
|
||||
const i = binarySearchInsertion(nums, target);
|
||||
// 未找到 target ，返回 -1
|
||||
if (i === nums.length || nums[i] !== target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "TS"
|
||||
|
||||
```typescript title="binary_search_edge.ts"
|
||||
/* 二分查找最左一个 target */
|
||||
function binarySearchLeftEdge(nums: Array<number>, target: number): number {
|
||||
// 等价于查找 target 的插入点
|
||||
const i = binarySearchInsertion(nums, target);
|
||||
// 未找到 target ，返回 -1
|
||||
if (i === nums.length || nums[i] !== target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Dart"
|
||||
|
||||
```dart title="binary_search_edge.dart"
|
||||
/* 二分查找最左一个 target */
|
||||
int binarySearchLeftEdge(List<int> nums, int target) {
|
||||
// 等价于查找 target 的插入点
|
||||
int i = binarySearchInsertion(nums, target);
|
||||
// 未找到 target ，返回 -1
|
||||
if (i == nums.length || nums[i] != target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Rust"
|
||||
|
||||
```rust title="binary_search_edge.rs"
|
||||
/* 二分查找最左一个 target */
|
||||
fn binary_search_left_edge(nums: &[i32], target: i32) -> i32 {
|
||||
// 等价于查找 target 的插入点
|
||||
let i = binary_search_insertion(nums, target);
|
||||
// 未找到 target ，返回 -1
|
||||
if i == nums.len() as i32 || nums[i as usize] != target {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
i
|
||||
}
|
||||
```
|
||||
|
||||
=== "C"
|
||||
|
||||
```c title="binary_search_edge.c"
|
||||
/* 二分查找最左一个 target */
|
||||
int binarySearchLeftEdge(int *nums, int numSize, int target) {
|
||||
// 等价于查找 target 的插入点
|
||||
int i = binarySearchInsertion(nums, numSize, target);
|
||||
// 未找到 target ，返回 -1
|
||||
if (i == numSize || nums[i] != target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Kotlin"
|
||||
|
||||
```kotlin title="binary_search_edge.kt"
|
||||
/* 二分查找最左一个 target */
|
||||
fun binarySearchLeftEdge(nums: IntArray, target: Int): Int {
|
||||
// 等价于查找 target 的插入点
|
||||
val i = binarySearchInsertion(nums, target)
|
||||
// 未找到 target ，返回 -1
|
||||
if (i == nums.size || nums[i] != target) {
|
||||
return -1
|
||||
}
|
||||
// 找到 target ，返回索引 i
|
||||
return i
|
||||
}
|
||||
```
|
||||
|
||||
=== "Ruby"
|
||||
|
||||
```ruby title="binary_search_edge.rb"
|
||||
### 二分查找最左一个 target ###
|
||||
def binary_search_left_edge(nums, target)
|
||||
# 等价于查找 target 的插入点
|
||||
i = binary_search_insertion(nums, target)
|
||||
|
||||
# 未找到 target ，返回 -1
|
||||
return -1 if i == nums.length || nums[i] != target
|
||||
|
||||
i # 找到 target ，返回索引 i
|
||||
end
|
||||
```
|
||||
|
||||
=== "Zig"
|
||||
|
||||
```zig title="binary_search_edge.zig"
|
||||
[class]{}-[func]{binarySearchLeftEdge}
|
||||
```
|
||||
|
||||
??? pythontutor "Code Visualization"
|
||||
|
||||
<div style="height: 549px; width: 100%;"><iframe class="pythontutor-iframe" src="https://pythontutor.com/iframe-embed.html#code=def%20binary_search_insertion%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%EF%BC%88%E5%AD%98%E5%9C%A8%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%EF%BC%89%22%22%22%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%20-%201%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%20%5B0,%20n-1%5D%0A%20%20%20%20while%20i%20%3C%3D%20j%3A%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20%E9%A6%96%E4%B8%AA%E5%B0%8F%E4%BA%8E%20target%20%E7%9A%84%E5%85%83%E7%B4%A0%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%23%20%E8%BF%94%E5%9B%9E%E6%8F%92%E5%85%A5%E7%82%B9%20i%0A%20%20%20%20return%20i%0A%0Adef%20binary_search_left_edge%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%9C%80%E5%B7%A6%E4%B8%80%E4%B8%AA%20target%22%22%22%0A%20%20%20%20%23%20%E7%AD%89%E4%BB%B7%E4%BA%8E%E6%9F%A5%E6%89%BE%20target%20%E7%9A%84%E6%8F%92%E5%85%A5%E7%82%B9%0A%20%20%20%20i%20%3D%20binary_search_insertion%28nums,%20target%29%0A%20%20%20%20%23%20%E6%9C%AA%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%20-1%0A%20%20%20%20if%20i%20%3D%3D%20len%28nums%29%20or%20nums%5Bi%5D%20!%3D%20target%3A%0A%20%20%20%20%20%20%20%20return%20-1%0A%20%20%20%20%23%20%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%E7%B4%A2%E5%BC%95%20i%0A%20%20%20%20return%20i%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20%23%20%E5%8C%85%E5%90%AB%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%E7%9A%84%E6%95%B0%E7%BB%84%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%206,%206,%206,%206,%2010,%2012,%2015%5D%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E5%B7%A6%E8%BE%B9%E7%95%8C%E5%92%8C%E5%8F%B3%E8%BE%B9%E7%95%8C%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20index%20%3D%20binary_search_left_edge%28nums,%20target%29%0A%20%20%20%20print%28f%22%E6%9C%80%E5%B7%A6%E4%B8%80%E4%B8%AA%E5%85%83%E7%B4%A0%20%7Btarget%7D%20%E7%9A%84%E7%B4%A2%E5%BC%95%E4%B8%BA%20%7Bindex%7D%22%29&codeDivHeight=472&codeDivWidth=350&cumulative=false&curInstr=6&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false"> </iframe></div>
|
||||
<div style="margin-top: 5px;"><a href="https://pythontutor.com/iframe-embed.html#code=def%20binary_search_insertion%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%EF%BC%88%E5%AD%98%E5%9C%A8%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%EF%BC%89%22%22%22%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%20-%201%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%20%5B0,%20n-1%5D%0A%20%20%20%20while%20i%20%3C%3D%20j%3A%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20%E9%A6%96%E4%B8%AA%E5%B0%8F%E4%BA%8E%20target%20%E7%9A%84%E5%85%83%E7%B4%A0%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%23%20%E8%BF%94%E5%9B%9E%E6%8F%92%E5%85%A5%E7%82%B9%20i%0A%20%20%20%20return%20i%0A%0Adef%20binary_search_left_edge%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%9C%80%E5%B7%A6%E4%B8%80%E4%B8%AA%20target%22%22%22%0A%20%20%20%20%23%20%E7%AD%89%E4%BB%B7%E4%BA%8E%E6%9F%A5%E6%89%BE%20target%20%E7%9A%84%E6%8F%92%E5%85%A5%E7%82%B9%0A%20%20%20%20i%20%3D%20binary_search_insertion%28nums,%20target%29%0A%20%20%20%20%23%20%E6%9C%AA%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%20-1%0A%20%20%20%20if%20i%20%3D%3D%20len%28nums%29%20or%20nums%5Bi%5D%20!%3D%20target%3A%0A%20%20%20%20%20%20%20%20return%20-1%0A%20%20%20%20%23%20%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%E7%B4%A2%E5%BC%95%20i%0A%20%20%20%20return%20i%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20%23%20%E5%8C%85%E5%90%AB%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%E7%9A%84%E6%95%B0%E7%BB%84%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%206,%206,%206,%206,%2010,%2012,%2015%5D%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E5%B7%A6%E8%BE%B9%E7%95%8C%E5%92%8C%E5%8F%B3%E8%BE%B9%E7%95%8C%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20index%20%3D%20binary_search_left_edge%28nums,%20target%29%0A%20%20%20%20print%28f%22%E6%9C%80%E5%B7%A6%E4%B8%80%E4%B8%AA%E5%85%83%E7%B4%A0%20%7Btarget%7D%20%E7%9A%84%E7%B4%A2%E5%BC%95%E4%B8%BA%20%7Bindex%7D%22%29&codeDivHeight=800&codeDivWidth=600&cumulative=false&curInstr=6&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false" target="_blank" rel="noopener noreferrer">Full Screen ></a></div>
|
||||
|
||||
## 10.3.2 Find the right boundary
|
||||
|
||||
So how do we find the rightmost `target`? The most straightforward way is to modify the code, replacing the pointer contraction operation in the case of `nums[m] == target`. The code is omitted here, but interested readers can implement it on their own.
|
||||
|
||||
Below we introduce two more cunning methods.
|
||||
|
||||
### 1. Reusing the search for the left boundary
|
||||
|
||||
In fact, we can use the function for finding the leftmost element to find the rightmost element, specifically by **transforming the search for the rightmost `target` into a search for the leftmost `target + 1`**.
|
||||
|
||||
As shown in the Figure 10-7 , after the search is completed, the pointer $i$ points to the leftmost `target + 1` (if it exists), while $j$ points to the rightmost `target`, **thus returning $j$ is sufficient**.
|
||||
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-7 Transforming the search for the right boundary into the search for the left boundary </p>
|
||||
|
||||
Please note, the insertion point returned is $i$, therefore, it should be subtracted by $1$ to obtain $j$:
|
||||
|
||||
=== "Python"
|
||||
|
||||
```python title="binary_search_edge.py"
|
||||
def binary_search_right_edge(nums: list[int], target: int) -> int:
|
||||
"""二分查找最右一个 target"""
|
||||
# 转化为查找最左一个 target + 1
|
||||
i = binary_search_insertion(nums, target + 1)
|
||||
# j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
j = i - 1
|
||||
# 未找到 target ，返回 -1
|
||||
if j == -1 or nums[j] != target:
|
||||
return -1
|
||||
# 找到 target ，返回索引 j
|
||||
return j
|
||||
```
|
||||
|
||||
=== "C++"
|
||||
|
||||
```cpp title="binary_search_edge.cpp"
|
||||
/* 二分查找最右一个 target */
|
||||
int binarySearchRightEdge(vector<int> &nums, int target) {
|
||||
// 转化为查找最左一个 target + 1
|
||||
int i = binarySearchInsertion(nums, target + 1);
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
int j = i - 1;
|
||||
// 未找到 target ，返回 -1
|
||||
if (j == -1 || nums[j] != target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
return j;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Java"
|
||||
|
||||
```java title="binary_search_edge.java"
|
||||
/* 二分查找最右一个 target */
|
||||
int binarySearchRightEdge(int[] nums, int target) {
|
||||
// 转化为查找最左一个 target + 1
|
||||
int i = binary_search_insertion.binarySearchInsertion(nums, target + 1);
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
int j = i - 1;
|
||||
// 未找到 target ，返回 -1
|
||||
if (j == -1 || nums[j] != target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
return j;
|
||||
}
|
||||
```
|
||||
|
||||
=== "C#"
|
||||
|
||||
```csharp title="binary_search_edge.cs"
|
||||
/* 二分查找最右一个 target */
|
||||
int BinarySearchRightEdge(int[] nums, int target) {
|
||||
// 转化为查找最左一个 target + 1
|
||||
int i = binary_search_insertion.BinarySearchInsertion(nums, target + 1);
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
int j = i - 1;
|
||||
// 未找到 target ，返回 -1
|
||||
if (j == -1 || nums[j] != target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
return j;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Go"
|
||||
|
||||
```go title="binary_search_edge.go"
|
||||
/* 二分查找最右一个 target */
|
||||
func binarySearchRightEdge(nums []int, target int) int {
|
||||
// 转化为查找最左一个 target + 1
|
||||
i := binarySearchInsertion(nums, target+1)
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
j := i - 1
|
||||
// 未找到 target ，返回 -1
|
||||
if j == -1 || nums[j] != target {
|
||||
return -1
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
return j
|
||||
}
|
||||
```
|
||||
|
||||
=== "Swift"
|
||||
|
||||
```swift title="binary_search_edge.swift"
|
||||
/* 二分查找最右一个 target */
|
||||
func binarySearchRightEdge(nums: [Int], target: Int) -> Int {
|
||||
// 转化为查找最左一个 target + 1
|
||||
let i = binarySearchInsertion(nums: nums, target: target + 1)
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
let j = i - 1
|
||||
// 未找到 target ，返回 -1
|
||||
if j == -1 || nums[j] != target {
|
||||
return -1
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
return j
|
||||
}
|
||||
```
|
||||
|
||||
=== "JS"
|
||||
|
||||
```javascript title="binary_search_edge.js"
|
||||
/* 二分查找最右一个 target */
|
||||
function binarySearchRightEdge(nums, target) {
|
||||
// 转化为查找最左一个 target + 1
|
||||
const i = binarySearchInsertion(nums, target + 1);
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
const j = i - 1;
|
||||
// 未找到 target ，返回 -1
|
||||
if (j === -1 || nums[j] !== target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
return j;
|
||||
}
|
||||
```
|
||||
|
||||
=== "TS"
|
||||
|
||||
```typescript title="binary_search_edge.ts"
|
||||
/* 二分查找最右一个 target */
|
||||
function binarySearchRightEdge(nums: Array<number>, target: number): number {
|
||||
// 转化为查找最左一个 target + 1
|
||||
const i = binarySearchInsertion(nums, target + 1);
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
const j = i - 1;
|
||||
// 未找到 target ，返回 -1
|
||||
if (j === -1 || nums[j] !== target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
return j;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Dart"
|
||||
|
||||
```dart title="binary_search_edge.dart"
|
||||
/* 二分查找最右一个 target */
|
||||
int binarySearchRightEdge(List<int> nums, int target) {
|
||||
// 转化为查找最左一个 target + 1
|
||||
int i = binarySearchInsertion(nums, target + 1);
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
int j = i - 1;
|
||||
// 未找到 target ，返回 -1
|
||||
if (j == -1 || nums[j] != target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
return j;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Rust"
|
||||
|
||||
```rust title="binary_search_edge.rs"
|
||||
/* 二分查找最右一个 target */
|
||||
fn binary_search_right_edge(nums: &[i32], target: i32) -> i32 {
|
||||
// 转化为查找最左一个 target + 1
|
||||
let i = binary_search_insertion(nums, target + 1);
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
let j = i - 1;
|
||||
// 未找到 target ，返回 -1
|
||||
if j == -1 || nums[j as usize] != target {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
j
|
||||
}
|
||||
```
|
||||
|
||||
=== "C"
|
||||
|
||||
```c title="binary_search_edge.c"
|
||||
/* 二分查找最右一个 target */
|
||||
int binarySearchRightEdge(int *nums, int numSize, int target) {
|
||||
// 转化为查找最左一个 target + 1
|
||||
int i = binarySearchInsertion(nums, numSize, target + 1);
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
int j = i - 1;
|
||||
// 未找到 target ，返回 -1
|
||||
if (j == -1 || nums[j] != target) {
|
||||
return -1;
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
return j;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Kotlin"
|
||||
|
||||
```kotlin title="binary_search_edge.kt"
|
||||
/* 二分查找最右一个 target */
|
||||
fun binarySearchRightEdge(nums: IntArray, target: Int): Int {
|
||||
// 转化为查找最左一个 target + 1
|
||||
val i = binarySearchInsertion(nums, target + 1)
|
||||
// j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
val j = i - 1
|
||||
// 未找到 target ，返回 -1
|
||||
if (j == -1 || nums[j] != target) {
|
||||
return -1
|
||||
}
|
||||
// 找到 target ，返回索引 j
|
||||
return j
|
||||
}
|
||||
```
|
||||
|
||||
=== "Ruby"
|
||||
|
||||
```ruby title="binary_search_edge.rb"
|
||||
### 二分查找最右一个 target ###
|
||||
def binary_search_right_edge(nums, target)
|
||||
# 转化为查找最左一个 target + 1
|
||||
i = binary_search_insertion(nums, target + 1)
|
||||
|
||||
# j 指向最右一个 target ，i 指向首个大于 target 的元素
|
||||
j = i - 1
|
||||
|
||||
# 未找到 target ，返回 -1
|
||||
return -1 if j == -1 || nums[j] != target
|
||||
|
||||
j # 找到 target ，返回索引 j
|
||||
end
|
||||
```
|
||||
|
||||
=== "Zig"
|
||||
|
||||
```zig title="binary_search_edge.zig"
|
||||
[class]{}-[func]{binarySearchRightEdge}
|
||||
```
|
||||
|
||||
??? pythontutor "Code Visualization"
|
||||
|
||||
<div style="height: 549px; width: 100%;"><iframe class="pythontutor-iframe" src="https://pythontutor.com/iframe-embed.html#code=def%20binary_search_insertion%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%EF%BC%88%E5%AD%98%E5%9C%A8%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%EF%BC%89%22%22%22%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%20-%201%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%20%5B0,%20n-1%5D%0A%20%20%20%20while%20i%20%3C%3D%20j%3A%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20%E9%A6%96%E4%B8%AA%E5%B0%8F%E4%BA%8E%20target%20%E7%9A%84%E5%85%83%E7%B4%A0%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%23%20%E8%BF%94%E5%9B%9E%E6%8F%92%E5%85%A5%E7%82%B9%20i%0A%20%20%20%20return%20i%0A%0Adef%20binary_search_right_edge%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%9C%80%E5%8F%B3%E4%B8%80%E4%B8%AA%20target%22%22%22%0A%20%20%20%20%23%20%E8%BD%AC%E5%8C%96%E4%B8%BA%E6%9F%A5%E6%89%BE%E6%9C%80%E5%B7%A6%E4%B8%80%E4%B8%AA%20target%20%2B%201%0A%20%20%20%20i%20%3D%20binary_search_insertion%28nums,%20target%20%2B%201%29%0A%20%20%20%20%23%20j%20%E6%8C%87%E5%90%91%E6%9C%80%E5%8F%B3%E4%B8%80%E4%B8%AA%20target%20%EF%BC%8Ci%20%E6%8C%87%E5%90%91%E9%A6%96%E4%B8%AA%E5%A4%A7%E4%BA%8E%20target%20%E7%9A%84%E5%85%83%E7%B4%A0%0A%20%20%20%20j%20%3D%20i%20-%201%0A%20%20%20%20%23%20%E6%9C%AA%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%20-1%0A%20%20%20%20if%20j%20%3D%3D%20-1%20or%20nums%5Bj%5D%20!%3D%20target%3A%0A%20%20%20%20%20%20%20%20return%20-1%0A%20%20%20%20%23%20%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%E7%B4%A2%E5%BC%95%20j%0A%20%20%20%20return%20j%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20%23%20%E5%8C%85%E5%90%AB%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%E7%9A%84%E6%95%B0%E7%BB%84%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%206,%206,%206,%206,%2010,%2012,%2015%5D%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E5%B7%A6%E8%BE%B9%E7%95%8C%E5%92%8C%E5%8F%B3%E8%BE%B9%E7%95%8C%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20index%20%3D%20binary_search_right_edge%28nums,%20target%29%0A%20%20%20%20print%28f%22%E6%9C%80%E5%8F%B3%E4%B8%80%E4%B8%AA%E5%85%83%E7%B4%A0%20%7Btarget%7D%20%E7%9A%84%E7%B4%A2%E5%BC%95%E4%B8%BA%20%7Bindex%7D%22%29&codeDivHeight=472&codeDivWidth=350&cumulative=false&curInstr=6&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false"> </iframe></div>
|
||||
<div style="margin-top: 5px;"><a href="https://pythontutor.com/iframe-embed.html#code=def%20binary_search_insertion%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%EF%BC%88%E5%AD%98%E5%9C%A8%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%EF%BC%89%22%22%22%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%20-%201%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%20%5B0,%20n-1%5D%0A%20%20%20%20while%20i%20%3C%3D%20j%3A%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20%E9%A6%96%E4%B8%AA%E5%B0%8F%E4%BA%8E%20target%20%E7%9A%84%E5%85%83%E7%B4%A0%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%23%20%E8%BF%94%E5%9B%9E%E6%8F%92%E5%85%A5%E7%82%B9%20i%0A%20%20%20%20return%20i%0A%0Adef%20binary_search_right_edge%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%9C%80%E5%8F%B3%E4%B8%80%E4%B8%AA%20target%22%22%22%0A%20%20%20%20%23%20%E8%BD%AC%E5%8C%96%E4%B8%BA%E6%9F%A5%E6%89%BE%E6%9C%80%E5%B7%A6%E4%B8%80%E4%B8%AA%20target%20%2B%201%0A%20%20%20%20i%20%3D%20binary_search_insertion%28nums,%20target%20%2B%201%29%0A%20%20%20%20%23%20j%20%E6%8C%87%E5%90%91%E6%9C%80%E5%8F%B3%E4%B8%80%E4%B8%AA%20target%20%EF%BC%8Ci%20%E6%8C%87%E5%90%91%E9%A6%96%E4%B8%AA%E5%A4%A7%E4%BA%8E%20target%20%E7%9A%84%E5%85%83%E7%B4%A0%0A%20%20%20%20j%20%3D%20i%20-%201%0A%20%20%20%20%23%20%E6%9C%AA%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%20-1%0A%20%20%20%20if%20j%20%3D%3D%20-1%20or%20nums%5Bj%5D%20!%3D%20target%3A%0A%20%20%20%20%20%20%20%20return%20-1%0A%20%20%20%20%23%20%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%E7%B4%A2%E5%BC%95%20j%0A%20%20%20%20return%20j%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20%23%20%E5%8C%85%E5%90%AB%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%E7%9A%84%E6%95%B0%E7%BB%84%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%206,%206,%206,%206,%2010,%2012,%2015%5D%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E5%B7%A6%E8%BE%B9%E7%95%8C%E5%92%8C%E5%8F%B3%E8%BE%B9%E7%95%8C%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20index%20%3D%20binary_search_right_edge%28nums,%20target%29%0A%20%20%20%20print%28f%22%E6%9C%80%E5%8F%B3%E4%B8%80%E4%B8%AA%E5%85%83%E7%B4%A0%20%7Btarget%7D%20%E7%9A%84%E7%B4%A2%E5%BC%95%E4%B8%BA%20%7Bindex%7D%22%29&codeDivHeight=800&codeDivWidth=600&cumulative=false&curInstr=6&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false" target="_blank" rel="noopener noreferrer">Full Screen ></a></div>
|
||||
|
||||
### 2. Transforming into an element search
|
||||
|
||||
We know that when the array does not contain `target`, $i$ and $j$ will eventually point to the first element greater and smaller than `target` respectively.
|
||||
|
||||
Thus, as shown in the Figure 10-8 , we can construct an element that does not exist in the array, to search for the left and right boundaries.
|
||||
|
||||
- To find the leftmost `target`: it can be transformed into searching for `target - 0.5`, and return the pointer $i$.
|
||||
- To find the rightmost `target`: it can be transformed into searching for `target + 0.5`, and return the pointer $j$.
|
||||
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-8 Transforming the search for boundaries into the search for an element </p>
|
||||
|
||||
The code is omitted here, but two points are worth noting.
|
||||
|
||||
- The given array does not contain decimals, meaning we do not need to worry about how to handle equal situations.
|
||||
- Since this method introduces decimals, the variable `target` in the function needs to be changed to a floating point type (no change needed in Python).
|
||||
@@ -0,0 +1,686 @@
|
||||
---
|
||||
comments: true
|
||||
---
|
||||
|
||||
# 10.2 Binary search insertion
|
||||
|
||||
Binary search is not only used to search for target elements but also to solve many variant problems, such as searching for the insertion position of target elements.
|
||||
|
||||
## 10.2.1 Case with no duplicate elements
|
||||
|
||||
!!! question
|
||||
|
||||
Given an ordered array `nums` of length $n$ and an element `target`, where the array has no duplicate elements. Now insert `target` into the array `nums` while maintaining its order. If the element `target` already exists in the array, insert it to its left side. Please return the index of `target` in the array after insertion. See the example shown in the Figure 10-4 .
|
||||
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-4 Example data for binary search insertion point </p>
|
||||
|
||||
If you want to reuse the binary search code from the previous section, you need to answer the following two questions.
|
||||
|
||||
**Question one**: When the array contains `target`, is the insertion point index the index of that element?
|
||||
|
||||
The requirement to insert `target` to the left of equal elements means that the newly inserted `target` replaces the original `target` position. Thus, **when the array contains `target`, the insertion point index is the index of that `target`**.
|
||||
|
||||
**Question two**: When the array does not contain `target`, what is the index of the insertion point?
|
||||
|
||||
Further consider the binary search process: when `nums[m] < target`, pointer $i$ moves, meaning that pointer $i$ is approaching an element greater than or equal to `target`. Similarly, pointer $j$ is always approaching an element less than or equal to `target`.
|
||||
|
||||
Therefore, at the end of the binary, it is certain that: $i$ points to the first element greater than `target`, and $j$ points to the first element less than `target`. **It is easy to see that when the array does not contain `target`, the insertion index is $i$**. The code is as follows:
|
||||
|
||||
=== "Python"
|
||||
|
||||
```python title="binary_search_insertion.py"
|
||||
def binary_search_insertion_simple(nums: list[int], target: int) -> int:
|
||||
"""二分查找插入点（无重复元素）"""
|
||||
i, j = 0, len(nums) - 1 # 初始化双闭区间 [0, n-1]
|
||||
while i <= j:
|
||||
m = (i + j) // 2 # 计算中点索引 m
|
||||
if nums[m] < target:
|
||||
i = m + 1 # target 在区间 [m+1, j] 中
|
||||
elif nums[m] > target:
|
||||
j = m - 1 # target 在区间 [i, m-1] 中
|
||||
else:
|
||||
return m # 找到 target ，返回插入点 m
|
||||
# 未找到 target ，返回插入点 i
|
||||
return i
|
||||
```
|
||||
|
||||
=== "C++"
|
||||
|
||||
```cpp title="binary_search_insertion.cpp"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
int binarySearchInsertionSimple(vector<int> &nums, int target) {
|
||||
int i = 0, j = nums.size() - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
return m; // 找到 target ，返回插入点 m
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Java"
|
||||
|
||||
```java title="binary_search_insertion.java"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
int binarySearchInsertionSimple(int[] nums, int target) {
|
||||
int i = 0, j = nums.length - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
return m; // 找到 target ，返回插入点 m
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "C#"
|
||||
|
||||
```csharp title="binary_search_insertion.cs"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
int BinarySearchInsertionSimple(int[] nums, int target) {
|
||||
int i = 0, j = nums.Length - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
return m; // 找到 target ，返回插入点 m
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Go"
|
||||
|
||||
```go title="binary_search_insertion.go"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
func binarySearchInsertionSimple(nums []int, target int) int {
|
||||
// 初始化双闭区间 [0, n-1]
|
||||
i, j := 0, len(nums)-1
|
||||
for i <= j {
|
||||
// 计算中点索引 m
|
||||
m := i + (j-i)/2
|
||||
if nums[m] < target {
|
||||
// target 在区间 [m+1, j] 中
|
||||
i = m + 1
|
||||
} else if nums[m] > target {
|
||||
// target 在区间 [i, m-1] 中
|
||||
j = m - 1
|
||||
} else {
|
||||
// 找到 target ，返回插入点 m
|
||||
return m
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
return i
|
||||
}
|
||||
```
|
||||
|
||||
=== "Swift"
|
||||
|
||||
```swift title="binary_search_insertion.swift"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
func binarySearchInsertionSimple(nums: [Int], target: Int) -> Int {
|
||||
// 初始化双闭区间 [0, n-1]
|
||||
var i = nums.startIndex
|
||||
var j = nums.endIndex - 1
|
||||
while i <= j {
|
||||
let m = i + (j - i) / 2 // 计算中点索引 m
|
||||
if nums[m] < target {
|
||||
i = m + 1 // target 在区间 [m+1, j] 中
|
||||
} else if nums[m] > target {
|
||||
j = m - 1 // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
return m // 找到 target ，返回插入点 m
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
return i
|
||||
}
|
||||
```
|
||||
|
||||
=== "JS"
|
||||
|
||||
```javascript title="binary_search_insertion.js"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
function binarySearchInsertionSimple(nums, target) {
|
||||
let i = 0,
|
||||
j = nums.length - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
const m = Math.floor(i + (j - i) / 2); // 计算中点索引 m, 使用 Math.floor() 向下取整
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
return m; // 找到 target ，返回插入点 m
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "TS"
|
||||
|
||||
```typescript title="binary_search_insertion.ts"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
function binarySearchInsertionSimple(
|
||||
nums: Array<number>,
|
||||
target: number
|
||||
): number {
|
||||
let i = 0,
|
||||
j = nums.length - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
const m = Math.floor(i + (j - i) / 2); // 计算中点索引 m, 使用 Math.floor() 向下取整
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
return m; // 找到 target ，返回插入点 m
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Dart"
|
||||
|
||||
```dart title="binary_search_insertion.dart"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
int binarySearchInsertionSimple(List<int> nums, int target) {
|
||||
int i = 0, j = nums.length - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) ~/ 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
return m; // 找到 target ，返回插入点 m
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Rust"
|
||||
|
||||
```rust title="binary_search_insertion.rs"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
fn binary_search_insertion_simple(nums: &[i32], target: i32) -> i32 {
|
||||
let (mut i, mut j) = (0, nums.len() as i32 - 1); // 初始化双闭区间 [0, n-1]
|
||||
while i <= j {
|
||||
let m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if nums[m as usize] < target {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if nums[m as usize] > target {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
return m;
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
i
|
||||
}
|
||||
```
|
||||
|
||||
=== "C"
|
||||
|
||||
```c title="binary_search_insertion.c"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
int binarySearchInsertionSimple(int *nums, int numSize, int target) {
|
||||
int i = 0, j = numSize - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
return m; // 找到 target ，返回插入点 m
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Kotlin"
|
||||
|
||||
```kotlin title="binary_search_insertion.kt"
|
||||
/* 二分查找插入点（无重复元素） */
|
||||
fun binarySearchInsertionSimple(nums: IntArray, target: Int): Int {
|
||||
var i = 0
|
||||
var j = nums.size - 1 // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
val m = i + (j - i) / 2 // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1 // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1 // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
return m // 找到 target ，返回插入点 m
|
||||
}
|
||||
}
|
||||
// 未找到 target ，返回插入点 i
|
||||
return i
|
||||
}
|
||||
```
|
||||
|
||||
=== "Ruby"
|
||||
|
||||
```ruby title="binary_search_insertion.rb"
|
||||
### 二分查找插入点（无重复元素） ###
|
||||
def binary_search_insertion_simple(nums, target)
|
||||
# 初始化双闭区间 [0, n-1]
|
||||
i, j = 0, nums.length - 1
|
||||
|
||||
while i <= j
|
||||
# 计算中点索引 m
|
||||
m = (i + j) / 2
|
||||
|
||||
if nums[m] < target
|
||||
i = m + 1 # target 在区间 [m+1, j] 中
|
||||
elsif nums[m] > target
|
||||
j = m - 1 # target 在区间 [i, m-1] 中
|
||||
else
|
||||
return m # 找到 target ，返回插入点 m
|
||||
end
|
||||
end
|
||||
|
||||
i # 未找到 target ，返回插入点 i
|
||||
end
|
||||
```
|
||||
|
||||
=== "Zig"
|
||||
|
||||
```zig title="binary_search_insertion.zig"
|
||||
[class]{}-[func]{binarySearchInsertionSimple}
|
||||
```
|
||||
|
||||
??? pythontutor "Code Visualization"
|
||||
|
||||
<div style="height: 549px; width: 100%;"><iframe class="pythontutor-iframe" src="https://pythontutor.com/iframe-embed.html#code=def%20binary_search_insertion_simple%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%EF%BC%88%E6%97%A0%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%EF%BC%89%22%22%22%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%20-%201%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%20%5B0,%20n-1%5D%0A%20%20%20%20while%20i%20%3C%3D%20j%3A%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20return%20m%20%20%23%20%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%E6%8F%92%E5%85%A5%E7%82%B9%20m%0A%20%20%20%20%23%20%E6%9C%AA%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%E6%8F%92%E5%85%A5%E7%82%B9%20i%0A%20%20%20%20return%20i%0A%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20%23%20%E6%97%A0%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%E7%9A%84%E6%95%B0%E7%BB%84%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%208,%2012,%2015,%2023,%2026,%2031,%2035%5D%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20index%20%3D%20binary_search_insertion_simple%28nums,%20target%29%0A%20%20%20%20print%28f%22%E5%85%83%E7%B4%A0%20%7Btarget%7D%20%E7%9A%84%E6%8F%92%E5%85%A5%E7%82%B9%E7%9A%84%E7%B4%A2%E5%BC%95%E4%B8%BA%20%7Bindex%7D%22%29&codeDivHeight=472&codeDivWidth=350&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false"> </iframe></div>
|
||||
<div style="margin-top: 5px;"><a href="https://pythontutor.com/iframe-embed.html#code=def%20binary_search_insertion_simple%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%EF%BC%88%E6%97%A0%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%EF%BC%89%22%22%22%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%20-%201%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%20%5B0,%20n-1%5D%0A%20%20%20%20while%20i%20%3C%3D%20j%3A%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20return%20m%20%20%23%20%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%E6%8F%92%E5%85%A5%E7%82%B9%20m%0A%20%20%20%20%23%20%E6%9C%AA%E6%89%BE%E5%88%B0%20target%20%EF%BC%8C%E8%BF%94%E5%9B%9E%E6%8F%92%E5%85%A5%E7%82%B9%20i%0A%20%20%20%20return%20i%0A%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20%23%20%E6%97%A0%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%E7%9A%84%E6%95%B0%E7%BB%84%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%208,%2012,%2015,%2023,%2026,%2031,%2035%5D%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20index%20%3D%20binary_search_insertion_simple%28nums,%20target%29%0A%20%20%20%20print%28f%22%E5%85%83%E7%B4%A0%20%7Btarget%7D%20%E7%9A%84%E6%8F%92%E5%85%A5%E7%82%B9%E7%9A%84%E7%B4%A2%E5%BC%95%E4%B8%BA%20%7Bindex%7D%22%29&codeDivHeight=800&codeDivWidth=600&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false" target="_blank" rel="noopener noreferrer">Full Screen ></a></div>
|
||||
|
||||
## 10.2.2 Case with duplicate elements
|
||||
|
||||
!!! question
|
||||
|
||||
Based on the previous question, assume the array may contain duplicate elements, all else remains the same.
|
||||
|
||||
Suppose there are multiple `target`s in the array, ordinary binary search can only return the index of one of the `target`s, **and it cannot determine how many `target`s are to the left and right of that element**.
|
||||
|
||||
The task requires inserting the target element to the very left, **so we need to find the index of the leftmost `target` in the array**. Initially consider implementing this through the steps shown in the Figure 10-5 .
|
||||
|
||||
1. Perform a binary search, get an arbitrary index of `target`, denoted as $k$.
|
||||
2. Start from index $k$, and perform a linear search to the left until the leftmost `target` is found and return.
|
||||
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-5 Linear search for the insertion point of duplicate elements </p>
|
||||
|
||||
Although this method is feasible, it includes linear search, so its time complexity is $O(n)$. This method is inefficient when the array contains many duplicate `target`s.
|
||||
|
||||
Now consider extending the binary search code. As shown in the Figure 10-6 , the overall process remains the same, each round first calculates the midpoint index $m$, then judges the size relationship between `target` and `nums[m]`, divided into the following cases.
|
||||
|
||||
- When `nums[m] < target` or `nums[m] > target`, it means `target` has not been found yet, thus use the normal binary search interval reduction operation, **thus making pointers $i$ and $j$ approach `target`**.
|
||||
- When `nums[m] == target`, it indicates that the elements less than `target` are in the interval $[i, m - 1]$, therefore use $j = m - 1$ to narrow the interval, **thus making pointer $j$ approach elements less than `target`**.
|
||||
|
||||
After the loop, $i$ points to the leftmost `target`, and $j$ points to the first element less than `target`, **therefore index $i$ is the insertion point**.
|
||||
|
||||
=== "<1>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<2>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<3>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<4>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<5>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<6>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<7>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<8>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-6 Steps for binary search insertion point of duplicate elements </p>
|
||||
|
||||
Observe the code, the operations of the branch `nums[m] > target` and `nums[m] == target` are the same, so the two can be combined.
|
||||
|
||||
Even so, we can still keep the conditions expanded, as their logic is clearer and more readable.
|
||||
|
||||
=== "Python"
|
||||
|
||||
```python title="binary_search_insertion.py"
|
||||
def binary_search_insertion(nums: list[int], target: int) -> int:
|
||||
"""二分查找插入点（存在重复元素）"""
|
||||
i, j = 0, len(nums) - 1 # 初始化双闭区间 [0, n-1]
|
||||
while i <= j:
|
||||
m = (i + j) // 2 # 计算中点索引 m
|
||||
if nums[m] < target:
|
||||
i = m + 1 # target 在区间 [m+1, j] 中
|
||||
elif nums[m] > target:
|
||||
j = m - 1 # target 在区间 [i, m-1] 中
|
||||
else:
|
||||
j = m - 1 # 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
# 返回插入点 i
|
||||
return i
|
||||
```
|
||||
|
||||
=== "C++"
|
||||
|
||||
```cpp title="binary_search_insertion.cpp"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
int binarySearchInsertion(vector<int> &nums, int target) {
|
||||
int i = 0, j = nums.size() - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
j = m - 1; // 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Java"
|
||||
|
||||
```java title="binary_search_insertion.java"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
int binarySearchInsertion(int[] nums, int target) {
|
||||
int i = 0, j = nums.length - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
j = m - 1; // 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "C#"
|
||||
|
||||
```csharp title="binary_search_insertion.cs"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
int BinarySearchInsertion(int[] nums, int target) {
|
||||
int i = 0, j = nums.Length - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
j = m - 1; // 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Go"
|
||||
|
||||
```go title="binary_search_insertion.go"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
func binarySearchInsertion(nums []int, target int) int {
|
||||
// 初始化双闭区间 [0, n-1]
|
||||
i, j := 0, len(nums)-1
|
||||
for i <= j {
|
||||
// 计算中点索引 m
|
||||
m := i + (j-i)/2
|
||||
if nums[m] < target {
|
||||
// target 在区间 [m+1, j] 中
|
||||
i = m + 1
|
||||
} else if nums[m] > target {
|
||||
// target 在区间 [i, m-1] 中
|
||||
j = m - 1
|
||||
} else {
|
||||
// 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
j = m - 1
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
return i
|
||||
}
|
||||
```
|
||||
|
||||
=== "Swift"
|
||||
|
||||
```swift title="binary_search_insertion.swift"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
func binarySearchInsertion(nums: [Int], target: Int) -> Int {
|
||||
// 初始化双闭区间 [0, n-1]
|
||||
var i = nums.startIndex
|
||||
var j = nums.endIndex - 1
|
||||
while i <= j {
|
||||
let m = i + (j - i) / 2 // 计算中点索引 m
|
||||
if nums[m] < target {
|
||||
i = m + 1 // target 在区间 [m+1, j] 中
|
||||
} else if nums[m] > target {
|
||||
j = m - 1 // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
j = m - 1 // 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
return i
|
||||
}
|
||||
```
|
||||
|
||||
=== "JS"
|
||||
|
||||
```javascript title="binary_search_insertion.js"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
function binarySearchInsertion(nums, target) {
|
||||
let i = 0,
|
||||
j = nums.length - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
const m = Math.floor(i + (j - i) / 2); // 计算中点索引 m, 使用 Math.floor() 向下取整
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
j = m - 1; // 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "TS"
|
||||
|
||||
```typescript title="binary_search_insertion.ts"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
function binarySearchInsertion(nums: Array<number>, target: number): number {
|
||||
let i = 0,
|
||||
j = nums.length - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
const m = Math.floor(i + (j - i) / 2); // 计算中点索引 m, 使用 Math.floor() 向下取整
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
j = m - 1; // 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Dart"
|
||||
|
||||
```dart title="binary_search_insertion.dart"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
int binarySearchInsertion(List<int> nums, int target) {
|
||||
int i = 0, j = nums.length - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) ~/ 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
j = m - 1; // 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Rust"
|
||||
|
||||
```rust title="binary_search_insertion.rs"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
pub fn binary_search_insertion(nums: &[i32], target: i32) -> i32 {
|
||||
let (mut i, mut j) = (0, nums.len() as i32 - 1); // 初始化双闭区间 [0, n-1]
|
||||
while i <= j {
|
||||
let m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if nums[m as usize] < target {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if nums[m as usize] > target {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
j = m - 1; // 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
i
|
||||
}
|
||||
```
|
||||
|
||||
=== "C"
|
||||
|
||||
```c title="binary_search_insertion.c"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
int binarySearchInsertion(int *nums, int numSize, int target) {
|
||||
int i = 0, j = numSize - 1; // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
int m = i + (j - i) / 2; // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1; // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1; // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
j = m - 1; // 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
return i;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Kotlin"
|
||||
|
||||
```kotlin title="binary_search_insertion.kt"
|
||||
/* 二分查找插入点（存在重复元素） */
|
||||
fun binarySearchInsertion(nums: IntArray, target: Int): Int {
|
||||
var i = 0
|
||||
var j = nums.size - 1 // 初始化双闭区间 [0, n-1]
|
||||
while (i <= j) {
|
||||
val m = i + (j - i) / 2 // 计算中点索引 m
|
||||
if (nums[m] < target) {
|
||||
i = m + 1 // target 在区间 [m+1, j] 中
|
||||
} else if (nums[m] > target) {
|
||||
j = m - 1 // target 在区间 [i, m-1] 中
|
||||
} else {
|
||||
j = m - 1 // 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
}
|
||||
}
|
||||
// 返回插入点 i
|
||||
return i
|
||||
}
|
||||
```
|
||||
|
||||
=== "Ruby"
|
||||
|
||||
```ruby title="binary_search_insertion.rb"
|
||||
### 二分查找插入点（存在重复元素） ###
|
||||
def binary_search_insertion(nums, target)
|
||||
# 初始化双闭区间 [0, n-1]
|
||||
i, j = 0, nums.length - 1
|
||||
|
||||
while i <= j
|
||||
# 计算中点索引 m
|
||||
m = (i + j) / 2
|
||||
|
||||
if nums[m] < target
|
||||
i = m + 1 # target 在区间 [m+1, j] 中
|
||||
elsif nums[m] > target
|
||||
j = m - 1 # target 在区间 [i, m-1] 中
|
||||
else
|
||||
j = m - 1 # 首个小于 target 的元素在区间 [i, m-1] 中
|
||||
end
|
||||
end
|
||||
|
||||
i # 返回插入点 i
|
||||
end
|
||||
```
|
||||
|
||||
=== "Zig"
|
||||
|
||||
```zig title="binary_search_insertion.zig"
|
||||
[class]{}-[func]{binarySearchInsertion}
|
||||
```
|
||||
|
||||
??? pythontutor "Code Visualization"
|
||||
|
||||
<div style="height: 549px; width: 100%;"><iframe class="pythontutor-iframe" src="https://pythontutor.com/iframe-embed.html#code=def%20binary_search_insertion%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%EF%BC%88%E5%AD%98%E5%9C%A8%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%EF%BC%89%22%22%22%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%20-%201%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%20%5B0,%20n-1%5D%0A%20%20%20%20while%20i%20%3C%3D%20j%3A%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20%E9%A6%96%E4%B8%AA%E5%B0%8F%E4%BA%8E%20target%20%E7%9A%84%E5%85%83%E7%B4%A0%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%23%20%E8%BF%94%E5%9B%9E%E6%8F%92%E5%85%A5%E7%82%B9%20i%0A%20%20%20%20return%20i%0A%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20%23%20%E5%8C%85%E5%90%AB%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%E7%9A%84%E6%95%B0%E7%BB%84%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%206,%206,%206,%206,%2010,%2012,%2015%5D%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20index%20%3D%20binary_search_insertion%28nums,%20target%29%0A%20%20%20%20print%28f%22%E5%85%83%E7%B4%A0%20%7Btarget%7D%20%E7%9A%84%E6%8F%92%E5%85%A5%E7%82%B9%E7%9A%84%E7%B4%A2%E5%BC%95%E4%B8%BA%20%7Bindex%7D%22%29&codeDivHeight=472&codeDivWidth=350&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false"> </iframe></div>
|
||||
<div style="margin-top: 5px;"><a href="https://pythontutor.com/iframe-embed.html#code=def%20binary_search_insertion%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20int%3A%0A%20%20%20%20%22%22%22%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%EF%BC%88%E5%AD%98%E5%9C%A8%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%EF%BC%89%22%22%22%0A%20%20%20%20i,%20j%20%3D%200,%20len%28nums%29%20-%201%20%20%23%20%E5%88%9D%E5%A7%8B%E5%8C%96%E5%8F%8C%E9%97%AD%E5%8C%BA%E9%97%B4%20%5B0,%20n-1%5D%0A%20%20%20%20while%20i%20%3C%3D%20j%3A%0A%20%20%20%20%20%20%20%20m%20%3D%20%28i%20%2B%20j%29%20//%202%20%20%23%20%E8%AE%A1%E7%AE%97%E4%B8%AD%E7%82%B9%E7%B4%A2%E5%BC%95%20m%0A%20%20%20%20%20%20%20%20if%20nums%5Bm%5D%20%3C%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20i%20%3D%20m%20%2B%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bm%2B1,%20j%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20elif%20nums%5Bm%5D%20%3E%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20target%20%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%20%20%20%20else%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20j%20%3D%20m%20-%201%20%20%23%20%E9%A6%96%E4%B8%AA%E5%B0%8F%E4%BA%8E%20target%20%E7%9A%84%E5%85%83%E7%B4%A0%E5%9C%A8%E5%8C%BA%E9%97%B4%20%5Bi,%20m-1%5D%20%E4%B8%AD%0A%20%20%20%20%23%20%E8%BF%94%E5%9B%9E%E6%8F%92%E5%85%A5%E7%82%B9%20i%0A%20%20%20%20return%20i%0A%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20%23%20%E5%8C%85%E5%90%AB%E9%87%8D%E5%A4%8D%E5%85%83%E7%B4%A0%E7%9A%84%E6%95%B0%E7%BB%84%0A%20%20%20%20nums%20%3D%20%5B1,%203,%206,%206,%206,%206,%206,%2010,%2012,%2015%5D%0A%20%20%20%20%23%20%E4%BA%8C%E5%88%86%E6%9F%A5%E6%89%BE%E6%8F%92%E5%85%A5%E7%82%B9%0A%20%20%20%20target%20%3D%206%0A%20%20%20%20index%20%3D%20binary_search_insertion%28nums,%20target%29%0A%20%20%20%20print%28f%22%E5%85%83%E7%B4%A0%20%7Btarget%7D%20%E7%9A%84%E6%8F%92%E5%85%A5%E7%82%B9%E7%9A%84%E7%B4%A2%E5%BC%95%E4%B8%BA%20%7Bindex%7D%22%29&codeDivHeight=800&codeDivWidth=600&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false" target="_blank" rel="noopener noreferrer">Full Screen ></a></div>
|
||||
|
||||
!!! tip
|
||||
|
||||
The code in this section uses "closed intervals". Readers interested can implement the "left-closed right-open" method themselves.
|
||||
|
||||
In summary, binary search is merely about setting search targets for pointers $i$ and $j$, which might be a specific element (like `target`) or a range of elements (like elements less than `target`).
|
||||
|
||||
In the continuous loop of binary search, pointers $i$ and $j$ gradually approach the predefined target. Ultimately, they either find the answer or stop after crossing the boundary.
|
||||
@@ -0,0 +1,23 @@
|
||||
---
|
||||
comments: true
|
||||
icon: material/text-search
|
||||
---
|
||||
|
||||
# Chapter 10. Searching
|
||||
|
||||
{ class="cover-image" }
|
||||
|
||||
!!! abstract
|
||||
|
||||
Searching is an unknown adventure, where we may need to traverse every corner of a mysterious space, or perhaps quickly pinpoint our target.
|
||||
|
||||
In this journey of discovery, each exploration may yield an unexpected answer.
|
||||
|
||||
## Chapter contents
|
||||
|
||||
- [10.1 Binary search](binary_search.md)
|
||||
- [10.2 Binary search insertion](binary_search_insertion.md)
|
||||
- [10.3 Binary search boundaries](binary_search_edge.md)
|
||||
- [10.4 Hashing optimization strategies](replace_linear_by_hashing.md)
|
||||
- [10.5 Search algorithms revisited](searching_algorithm_revisited.md)
|
||||
- [10.6 Summary](summary.md)
|
||||
@@ -0,0 +1,587 @@
|
||||
---
|
||||
comments: true
|
||||
---
|
||||
|
||||
# 10.4 Hash optimization strategies
|
||||
|
||||
In algorithm problems, **we often reduce the time complexity of algorithms by replacing linear search with hash search**. Let's use an algorithm problem to deepen understanding.
|
||||
|
||||
!!! question
|
||||
|
||||
Given an integer array `nums` and a target element `target`, please search for two elements in the array whose "sum" equals `target`, and return their array indices. Any solution is acceptable.
|
||||
|
||||
## 10.4.1 Linear search: trading time for space
|
||||
|
||||
Consider traversing all possible combinations directly. As shown in the Figure 10-9 , we initiate a two-layer loop, and in each round, we determine whether the sum of the two integers equals `target`. If so, we return their indices.
|
||||
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-9 Linear search solution for two-sum problem </p>
|
||||
|
||||
The code is shown below:
|
||||
|
||||
=== "Python"
|
||||
|
||||
```python title="two_sum.py"
|
||||
def two_sum_brute_force(nums: list[int], target: int) -> list[int]:
|
||||
"""方法一：暴力枚举"""
|
||||
# 两层循环，时间复杂度为 O(n^2)
|
||||
for i in range(len(nums) - 1):
|
||||
for j in range(i + 1, len(nums)):
|
||||
if nums[i] + nums[j] == target:
|
||||
return [i, j]
|
||||
return []
|
||||
```
|
||||
|
||||
=== "C++"
|
||||
|
||||
```cpp title="two_sum.cpp"
|
||||
/* 方法一：暴力枚举 */
|
||||
vector<int> twoSumBruteForce(vector<int> &nums, int target) {
|
||||
int size = nums.size();
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
for (int i = 0; i < size - 1; i++) {
|
||||
for (int j = i + 1; j < size; j++) {
|
||||
if (nums[i] + nums[j] == target)
|
||||
return {i, j};
|
||||
}
|
||||
}
|
||||
return {};
|
||||
}
|
||||
```
|
||||
|
||||
=== "Java"
|
||||
|
||||
```java title="two_sum.java"
|
||||
/* 方法一：暴力枚举 */
|
||||
int[] twoSumBruteForce(int[] nums, int target) {
|
||||
int size = nums.length;
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
for (int i = 0; i < size - 1; i++) {
|
||||
for (int j = i + 1; j < size; j++) {
|
||||
if (nums[i] + nums[j] == target)
|
||||
return new int[] { i, j };
|
||||
}
|
||||
}
|
||||
return new int[0];
|
||||
}
|
||||
```
|
||||
|
||||
=== "C#"
|
||||
|
||||
```csharp title="two_sum.cs"
|
||||
/* 方法一：暴力枚举 */
|
||||
int[] TwoSumBruteForce(int[] nums, int target) {
|
||||
int size = nums.Length;
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
for (int i = 0; i < size - 1; i++) {
|
||||
for (int j = i + 1; j < size; j++) {
|
||||
if (nums[i] + nums[j] == target)
|
||||
return [i, j];
|
||||
}
|
||||
}
|
||||
return [];
|
||||
}
|
||||
```
|
||||
|
||||
=== "Go"
|
||||
|
||||
```go title="two_sum.go"
|
||||
/* 方法一：暴力枚举 */
|
||||
func twoSumBruteForce(nums []int, target int) []int {
|
||||
size := len(nums)
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
for i := 0; i < size-1; i++ {
|
||||
for j := i + 1; j < size; j++ {
|
||||
if nums[i]+nums[j] == target {
|
||||
return []int{i, j}
|
||||
}
|
||||
}
|
||||
}
|
||||
return nil
|
||||
}
|
||||
```
|
||||
|
||||
=== "Swift"
|
||||
|
||||
```swift title="two_sum.swift"
|
||||
/* 方法一：暴力枚举 */
|
||||
func twoSumBruteForce(nums: [Int], target: Int) -> [Int] {
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
for i in nums.indices.dropLast() {
|
||||
for j in nums.indices.dropFirst(i + 1) {
|
||||
if nums[i] + nums[j] == target {
|
||||
return [i, j]
|
||||
}
|
||||
}
|
||||
}
|
||||
return [0]
|
||||
}
|
||||
```
|
||||
|
||||
=== "JS"
|
||||
|
||||
```javascript title="two_sum.js"
|
||||
/* 方法一：暴力枚举 */
|
||||
function twoSumBruteForce(nums, target) {
|
||||
const n = nums.length;
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
for (let i = 0; i < n; i++) {
|
||||
for (let j = i + 1; j < n; j++) {
|
||||
if (nums[i] + nums[j] === target) {
|
||||
return [i, j];
|
||||
}
|
||||
}
|
||||
}
|
||||
return [];
|
||||
}
|
||||
```
|
||||
|
||||
=== "TS"
|
||||
|
||||
```typescript title="two_sum.ts"
|
||||
/* 方法一：暴力枚举 */
|
||||
function twoSumBruteForce(nums: number[], target: number): number[] {
|
||||
const n = nums.length;
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
for (let i = 0; i < n; i++) {
|
||||
for (let j = i + 1; j < n; j++) {
|
||||
if (nums[i] + nums[j] === target) {
|
||||
return [i, j];
|
||||
}
|
||||
}
|
||||
}
|
||||
return [];
|
||||
}
|
||||
```
|
||||
|
||||
=== "Dart"
|
||||
|
||||
```dart title="two_sum.dart"
|
||||
/* 方法一： 暴力枚举 */
|
||||
List<int> twoSumBruteForce(List<int> nums, int target) {
|
||||
int size = nums.length;
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
for (var i = 0; i < size - 1; i++) {
|
||||
for (var j = i + 1; j < size; j++) {
|
||||
if (nums[i] + nums[j] == target) return [i, j];
|
||||
}
|
||||
}
|
||||
return [0];
|
||||
}
|
||||
```
|
||||
|
||||
=== "Rust"
|
||||
|
||||
```rust title="two_sum.rs"
|
||||
/* 方法一：暴力枚举 */
|
||||
pub fn two_sum_brute_force(nums: &Vec<i32>, target: i32) -> Option<Vec<i32>> {
|
||||
let size = nums.len();
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
for i in 0..size - 1 {
|
||||
for j in i + 1..size {
|
||||
if nums[i] + nums[j] == target {
|
||||
return Some(vec![i as i32, j as i32]);
|
||||
}
|
||||
}
|
||||
}
|
||||
None
|
||||
}
|
||||
```
|
||||
|
||||
=== "C"
|
||||
|
||||
```c title="two_sum.c"
|
||||
/* 方法一：暴力枚举 */
|
||||
int *twoSumBruteForce(int *nums, int numsSize, int target, int *returnSize) {
|
||||
for (int i = 0; i < numsSize; ++i) {
|
||||
for (int j = i + 1; j < numsSize; ++j) {
|
||||
if (nums[i] + nums[j] == target) {
|
||||
int *res = malloc(sizeof(int) * 2);
|
||||
res[0] = i, res[1] = j;
|
||||
*returnSize = 2;
|
||||
return res;
|
||||
}
|
||||
}
|
||||
}
|
||||
*returnSize = 0;
|
||||
return NULL;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Kotlin"
|
||||
|
||||
```kotlin title="two_sum.kt"
|
||||
/* 方法一：暴力枚举 */
|
||||
fun twoSumBruteForce(nums: IntArray, target: Int): IntArray {
|
||||
val size = nums.size
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
for (i in 0..<size - 1) {
|
||||
for (j in i + 1..<size) {
|
||||
if (nums[i] + nums[j] == target) return intArrayOf(i, j)
|
||||
}
|
||||
}
|
||||
return IntArray(0)
|
||||
}
|
||||
```
|
||||
|
||||
=== "Ruby"
|
||||
|
||||
```ruby title="two_sum.rb"
|
||||
### 方法一：暴力枚举 ###
|
||||
def two_sum_brute_force(nums, target)
|
||||
# 两层循环，时间复杂度为 O(n^2)
|
||||
for i in 0...(nums.length - 1)
|
||||
for j in (i + 1)...nums.length
|
||||
return [i, j] if nums[i] + nums[j] == target
|
||||
end
|
||||
end
|
||||
|
||||
[]
|
||||
end
|
||||
```
|
||||
|
||||
=== "Zig"
|
||||
|
||||
```zig title="two_sum.zig"
|
||||
// 方法一：暴力枚举
|
||||
fn twoSumBruteForce(nums: []i32, target: i32) ?[2]i32 {
|
||||
var size: usize = nums.len;
|
||||
var i: usize = 0;
|
||||
// 两层循环，时间复杂度为 O(n^2)
|
||||
while (i < size - 1) : (i += 1) {
|
||||
var j = i + 1;
|
||||
while (j < size) : (j += 1) {
|
||||
if (nums[i] + nums[j] == target) {
|
||||
return [_]i32{@intCast(i), @intCast(j)};
|
||||
}
|
||||
}
|
||||
}
|
||||
return null;
|
||||
}
|
||||
```
|
||||
|
||||
??? pythontutor "Code Visualization"
|
||||
|
||||
<div style="height: 441px; width: 100%;"><iframe class="pythontutor-iframe" src="https://pythontutor.com/iframe-embed.html#code=def%20two_sum_brute_force%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20list%5Bint%5D%3A%0A%20%20%20%20%22%22%22%E6%96%B9%E6%B3%95%E4%B8%80%EF%BC%9A%E6%9A%B4%E5%8A%9B%E6%9E%9A%E4%B8%BE%22%22%22%0A%20%20%20%20%23%20%E4%B8%A4%E5%B1%82%E5%BE%AA%E7%8E%AF%EF%BC%8C%E6%97%B6%E9%97%B4%E5%A4%8D%E6%9D%82%E5%BA%A6%E4%B8%BA%20O%28n%5E2%29%0A%20%20%20%20for%20i%20in%20range%28len%28nums%29%20-%201%29%3A%0A%20%20%20%20%20%20%20%20for%20j%20in%20range%28i%20%2B%201,%20len%28nums%29%29%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20if%20nums%5Bi%5D%20%2B%20nums%5Bj%5D%20%3D%3D%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20return%20%5Bi,%20j%5D%0A%20%20%20%20return%20%5B%5D%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20nums%20%3D%20%5B2,%207,%2011,%2015%5D%0A%20%20%20%20target%20%3D%2013%0A%20%20%20%20res%20%3D%20two_sum_brute_force%28nums,%20target%29&codeDivHeight=472&codeDivWidth=350&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false"> </iframe></div>
|
||||
<div style="margin-top: 5px;"><a href="https://pythontutor.com/iframe-embed.html#code=def%20two_sum_brute_force%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20list%5Bint%5D%3A%0A%20%20%20%20%22%22%22%E6%96%B9%E6%B3%95%E4%B8%80%EF%BC%9A%E6%9A%B4%E5%8A%9B%E6%9E%9A%E4%B8%BE%22%22%22%0A%20%20%20%20%23%20%E4%B8%A4%E5%B1%82%E5%BE%AA%E7%8E%AF%EF%BC%8C%E6%97%B6%E9%97%B4%E5%A4%8D%E6%9D%82%E5%BA%A6%E4%B8%BA%20O%28n%5E2%29%0A%20%20%20%20for%20i%20in%20range%28len%28nums%29%20-%201%29%3A%0A%20%20%20%20%20%20%20%20for%20j%20in%20range%28i%20%2B%201,%20len%28nums%29%29%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20if%20nums%5Bi%5D%20%2B%20nums%5Bj%5D%20%3D%3D%20target%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20return%20%5Bi,%20j%5D%0A%20%20%20%20return%20%5B%5D%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20nums%20%3D%20%5B2,%207,%2011,%2015%5D%0A%20%20%20%20target%20%3D%2013%0A%20%20%20%20res%20%3D%20two_sum_brute_force%28nums,%20target%29&codeDivHeight=800&codeDivWidth=600&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false" target="_blank" rel="noopener noreferrer">Full Screen ></a></div>
|
||||
|
||||
This method has a time complexity of $O(n^2)$ and a space complexity of $O(1)$, which is very time-consuming with large data volumes.
|
||||
|
||||
## 10.4.2 Hash search: trading space for time
|
||||
|
||||
Consider using a hash table, with key-value pairs being the array elements and their indices, respectively. Loop through the array, performing the steps shown in the figures below each round.
|
||||
|
||||
1. Check if the number `target - nums[i]` is in the hash table. If so, directly return the indices of these two elements.
|
||||
2. Add the key-value pair `nums[i]` and index `i` to the hash table.
|
||||
|
||||
=== "<1>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<2>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
=== "<3>"
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-10 Help hash table solve two-sum </p>
|
||||
|
||||
The implementation code is shown below, requiring only a single loop:
|
||||
|
||||
=== "Python"
|
||||
|
||||
```python title="two_sum.py"
|
||||
def two_sum_hash_table(nums: list[int], target: int) -> list[int]:
|
||||
"""方法二：辅助哈希表"""
|
||||
# 辅助哈希表，空间复杂度为 O(n)
|
||||
dic = {}
|
||||
# 单层循环，时间复杂度为 O(n)
|
||||
for i in range(len(nums)):
|
||||
if target - nums[i] in dic:
|
||||
return [dic[target - nums[i]], i]
|
||||
dic[nums[i]] = i
|
||||
return []
|
||||
```
|
||||
|
||||
=== "C++"
|
||||
|
||||
```cpp title="two_sum.cpp"
|
||||
/* 方法二：辅助哈希表 */
|
||||
vector<int> twoSumHashTable(vector<int> &nums, int target) {
|
||||
int size = nums.size();
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
unordered_map<int, int> dic;
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
for (int i = 0; i < size; i++) {
|
||||
if (dic.find(target - nums[i]) != dic.end()) {
|
||||
return {dic[target - nums[i]], i};
|
||||
}
|
||||
dic.emplace(nums[i], i);
|
||||
}
|
||||
return {};
|
||||
}
|
||||
```
|
||||
|
||||
=== "Java"
|
||||
|
||||
```java title="two_sum.java"
|
||||
/* 方法二：辅助哈希表 */
|
||||
int[] twoSumHashTable(int[] nums, int target) {
|
||||
int size = nums.length;
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
Map<Integer, Integer> dic = new HashMap<>();
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
for (int i = 0; i < size; i++) {
|
||||
if (dic.containsKey(target - nums[i])) {
|
||||
return new int[] { dic.get(target - nums[i]), i };
|
||||
}
|
||||
dic.put(nums[i], i);
|
||||
}
|
||||
return new int[0];
|
||||
}
|
||||
```
|
||||
|
||||
=== "C#"
|
||||
|
||||
```csharp title="two_sum.cs"
|
||||
/* 方法二：辅助哈希表 */
|
||||
int[] TwoSumHashTable(int[] nums, int target) {
|
||||
int size = nums.Length;
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
Dictionary<int, int> dic = [];
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
for (int i = 0; i < size; i++) {
|
||||
if (dic.ContainsKey(target - nums[i])) {
|
||||
return [dic[target - nums[i]], i];
|
||||
}
|
||||
dic.Add(nums[i], i);
|
||||
}
|
||||
return [];
|
||||
}
|
||||
```
|
||||
|
||||
=== "Go"
|
||||
|
||||
```go title="two_sum.go"
|
||||
/* 方法二：辅助哈希表 */
|
||||
func twoSumHashTable(nums []int, target int) []int {
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
hashTable := map[int]int{}
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
for idx, val := range nums {
|
||||
if preIdx, ok := hashTable[target-val]; ok {
|
||||
return []int{preIdx, idx}
|
||||
}
|
||||
hashTable[val] = idx
|
||||
}
|
||||
return nil
|
||||
}
|
||||
```
|
||||
|
||||
=== "Swift"
|
||||
|
||||
```swift title="two_sum.swift"
|
||||
/* 方法二：辅助哈希表 */
|
||||
func twoSumHashTable(nums: [Int], target: Int) -> [Int] {
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
var dic: [Int: Int] = [:]
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
for i in nums.indices {
|
||||
if let j = dic[target - nums[i]] {
|
||||
return [j, i]
|
||||
}
|
||||
dic[nums[i]] = i
|
||||
}
|
||||
return [0]
|
||||
}
|
||||
```
|
||||
|
||||
=== "JS"
|
||||
|
||||
```javascript title="two_sum.js"
|
||||
/* 方法二：辅助哈希表 */
|
||||
function twoSumHashTable(nums, target) {
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
let m = {};
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
for (let i = 0; i < nums.length; i++) {
|
||||
if (m[target - nums[i]] !== undefined) {
|
||||
return [m[target - nums[i]], i];
|
||||
} else {
|
||||
m[nums[i]] = i;
|
||||
}
|
||||
}
|
||||
return [];
|
||||
}
|
||||
```
|
||||
|
||||
=== "TS"
|
||||
|
||||
```typescript title="two_sum.ts"
|
||||
/* 方法二：辅助哈希表 */
|
||||
function twoSumHashTable(nums: number[], target: number): number[] {
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
let m: Map<number, number> = new Map();
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
for (let i = 0; i < nums.length; i++) {
|
||||
let index = m.get(target - nums[i]);
|
||||
if (index !== undefined) {
|
||||
return [index, i];
|
||||
} else {
|
||||
m.set(nums[i], i);
|
||||
}
|
||||
}
|
||||
return [];
|
||||
}
|
||||
```
|
||||
|
||||
=== "Dart"
|
||||
|
||||
```dart title="two_sum.dart"
|
||||
/* 方法二： 辅助哈希表 */
|
||||
List<int> twoSumHashTable(List<int> nums, int target) {
|
||||
int size = nums.length;
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
Map<int, int> dic = HashMap();
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
for (var i = 0; i < size; i++) {
|
||||
if (dic.containsKey(target - nums[i])) {
|
||||
return [dic[target - nums[i]]!, i];
|
||||
}
|
||||
dic.putIfAbsent(nums[i], () => i);
|
||||
}
|
||||
return [0];
|
||||
}
|
||||
```
|
||||
|
||||
=== "Rust"
|
||||
|
||||
```rust title="two_sum.rs"
|
||||
/* 方法二：辅助哈希表 */
|
||||
pub fn two_sum_hash_table(nums: &Vec<i32>, target: i32) -> Option<Vec<i32>> {
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
let mut dic = HashMap::new();
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
for (i, num) in nums.iter().enumerate() {
|
||||
match dic.get(&(target - num)) {
|
||||
Some(v) => return Some(vec![*v as i32, i as i32]),
|
||||
None => dic.insert(num, i as i32),
|
||||
};
|
||||
}
|
||||
None
|
||||
}
|
||||
```
|
||||
|
||||
=== "C"
|
||||
|
||||
```c title="two_sum.c"
|
||||
/* 哈希表 */
|
||||
typedef struct {
|
||||
int key;
|
||||
int val;
|
||||
UT_hash_handle hh; // 基于 uthash.h 实现
|
||||
} HashTable;
|
||||
|
||||
/* 哈希表查询 */
|
||||
HashTable *find(HashTable *h, int key) {
|
||||
HashTable *tmp;
|
||||
HASH_FIND_INT(h, &key, tmp);
|
||||
return tmp;
|
||||
}
|
||||
|
||||
/* 哈希表元素插入 */
|
||||
void insert(HashTable *h, int key, int val) {
|
||||
HashTable *t = find(h, key);
|
||||
if (t == NULL) {
|
||||
HashTable *tmp = malloc(sizeof(HashTable));
|
||||
tmp->key = key, tmp->val = val;
|
||||
HASH_ADD_INT(h, key, tmp);
|
||||
} else {
|
||||
t->val = val;
|
||||
}
|
||||
}
|
||||
|
||||
/* 方法二：辅助哈希表 */
|
||||
int *twoSumHashTable(int *nums, int numsSize, int target, int *returnSize) {
|
||||
HashTable *hashtable = NULL;
|
||||
for (int i = 0; i < numsSize; i++) {
|
||||
HashTable *t = find(hashtable, target - nums[i]);
|
||||
if (t != NULL) {
|
||||
int *res = malloc(sizeof(int) * 2);
|
||||
res[0] = t->val, res[1] = i;
|
||||
*returnSize = 2;
|
||||
return res;
|
||||
}
|
||||
insert(hashtable, nums[i], i);
|
||||
}
|
||||
*returnSize = 0;
|
||||
return NULL;
|
||||
}
|
||||
```
|
||||
|
||||
=== "Kotlin"
|
||||
|
||||
```kotlin title="two_sum.kt"
|
||||
/* 方法二：辅助哈希表 */
|
||||
fun twoSumHashTable(nums: IntArray, target: Int): IntArray {
|
||||
val size = nums.size
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
val dic = HashMap<Int, Int>()
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
for (i in 0..<size) {
|
||||
if (dic.containsKey(target - nums[i])) {
|
||||
return intArrayOf(dic[target - nums[i]]!!, i)
|
||||
}
|
||||
dic[nums[i]] = i
|
||||
}
|
||||
return IntArray(0)
|
||||
}
|
||||
```
|
||||
|
||||
=== "Ruby"
|
||||
|
||||
```ruby title="two_sum.rb"
|
||||
### 方法二：辅助哈希表 ###
|
||||
def two_sum_hash_table(nums, target)
|
||||
# 辅助哈希表，空间复杂度为 O(n)
|
||||
dic = {}
|
||||
# 单层循环，时间复杂度为 O(n)
|
||||
for i in 0...nums.length
|
||||
return [dic[target - nums[i]], i] if dic.has_key?(target - nums[i])
|
||||
|
||||
dic[nums[i]] = i
|
||||
end
|
||||
|
||||
[]
|
||||
end
|
||||
```
|
||||
|
||||
=== "Zig"
|
||||
|
||||
```zig title="two_sum.zig"
|
||||
// 方法二：辅助哈希表
|
||||
fn twoSumHashTable(nums: []i32, target: i32) !?[2]i32 {
|
||||
var size: usize = nums.len;
|
||||
// 辅助哈希表，空间复杂度为 O(n)
|
||||
var dic = std.AutoHashMap(i32, i32).init(std.heap.page_allocator);
|
||||
defer dic.deinit();
|
||||
var i: usize = 0;
|
||||
// 单层循环，时间复杂度为 O(n)
|
||||
while (i < size) : (i += 1) {
|
||||
if (dic.contains(target - nums[i])) {
|
||||
return [_]i32{dic.get(target - nums[i]).?, @intCast(i)};
|
||||
}
|
||||
try dic.put(nums[i], @intCast(i));
|
||||
}
|
||||
return null;
|
||||
}
|
||||
```
|
||||
|
||||
??? pythontutor "Code Visualization"
|
||||
|
||||
<div style="height: 477px; width: 100%;"><iframe class="pythontutor-iframe" src="https://pythontutor.com/iframe-embed.html#code=def%20two_sum_hash_table%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20list%5Bint%5D%3A%0A%20%20%20%20%22%22%22%E6%96%B9%E6%B3%95%E4%BA%8C%EF%BC%9A%E8%BE%85%E5%8A%A9%E5%93%88%E5%B8%8C%E8%A1%A8%22%22%22%0A%20%20%20%20%23%20%E8%BE%85%E5%8A%A9%E5%93%88%E5%B8%8C%E8%A1%A8%EF%BC%8C%E7%A9%BA%E9%97%B4%E5%A4%8D%E6%9D%82%E5%BA%A6%E4%B8%BA%20O%28n%29%0A%20%20%20%20dic%20%3D%20%7B%7D%0A%20%20%20%20%23%20%E5%8D%95%E5%B1%82%E5%BE%AA%E7%8E%AF%EF%BC%8C%E6%97%B6%E9%97%B4%E5%A4%8D%E6%9D%82%E5%BA%A6%E4%B8%BA%20O%28n%29%0A%20%20%20%20for%20i%20in%20range%28len%28nums%29%29%3A%0A%20%20%20%20%20%20%20%20if%20target%20-%20nums%5Bi%5D%20in%20dic%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20return%20%5Bdic%5Btarget%20-%20nums%5Bi%5D%5D,%20i%5D%0A%20%20%20%20%20%20%20%20dic%5Bnums%5Bi%5D%5D%20%3D%20i%0A%20%20%20%20return%20%5B%5D%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20nums%20%3D%20%5B2,%207,%2011,%2015%5D%0A%20%20%20%20target%20%3D%2013%0A%20%20%20%20res%20%3D%20two_sum_hash_table%28nums,%20target%29&codeDivHeight=472&codeDivWidth=350&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false"> </iframe></div>
|
||||
<div style="margin-top: 5px;"><a href="https://pythontutor.com/iframe-embed.html#code=def%20two_sum_hash_table%28nums%3A%20list%5Bint%5D,%20target%3A%20int%29%20-%3E%20list%5Bint%5D%3A%0A%20%20%20%20%22%22%22%E6%96%B9%E6%B3%95%E4%BA%8C%EF%BC%9A%E8%BE%85%E5%8A%A9%E5%93%88%E5%B8%8C%E8%A1%A8%22%22%22%0A%20%20%20%20%23%20%E8%BE%85%E5%8A%A9%E5%93%88%E5%B8%8C%E8%A1%A8%EF%BC%8C%E7%A9%BA%E9%97%B4%E5%A4%8D%E6%9D%82%E5%BA%A6%E4%B8%BA%20O%28n%29%0A%20%20%20%20dic%20%3D%20%7B%7D%0A%20%20%20%20%23%20%E5%8D%95%E5%B1%82%E5%BE%AA%E7%8E%AF%EF%BC%8C%E6%97%B6%E9%97%B4%E5%A4%8D%E6%9D%82%E5%BA%A6%E4%B8%BA%20O%28n%29%0A%20%20%20%20for%20i%20in%20range%28len%28nums%29%29%3A%0A%20%20%20%20%20%20%20%20if%20target%20-%20nums%5Bi%5D%20in%20dic%3A%0A%20%20%20%20%20%20%20%20%20%20%20%20return%20%5Bdic%5Btarget%20-%20nums%5Bi%5D%5D,%20i%5D%0A%20%20%20%20%20%20%20%20dic%5Bnums%5Bi%5D%5D%20%3D%20i%0A%20%20%20%20return%20%5B%5D%0A%0A%22%22%22Driver%20Code%22%22%22%0Aif%20__name__%20%3D%3D%20%22__main__%22%3A%0A%20%20%20%20nums%20%3D%20%5B2,%207,%2011,%2015%5D%0A%20%20%20%20target%20%3D%2013%0A%20%20%20%20res%20%3D%20two_sum_hash_table%28nums,%20target%29&codeDivHeight=800&codeDivWidth=600&cumulative=false&curInstr=5&heapPrimitives=nevernest&origin=opt-frontend.js&py=311&rawInputLstJSON=%5B%5D&textReferences=false" target="_blank" rel="noopener noreferrer">Full Screen ></a></div>
|
||||
|
||||
This method reduces the time complexity from $O(n^2)$ to $O(n)$ by using hash search, greatly improving the running efficiency.
|
||||
|
||||
As it requires maintaining an additional hash table, the space complexity is $O(n)$. **Nevertheless, this method has a more balanced time-space efficiency overall, making it the optimal solution for this problem**.
|
||||
@@ -0,0 +1,94 @@
|
||||
---
|
||||
comments: true
|
||||
---
|
||||
|
||||
# 10.5 Search algorithms revisited
|
||||
|
||||
<u>Searching algorithms (searching algorithm)</u> are used to search for one or several elements that meet specific criteria in data structures such as arrays, linked lists, trees, or graphs.
|
||||
|
||||
Searching algorithms can be divided into the following two categories based on their implementation approaches.
|
||||
|
||||
- **Locating the target element by traversing the data structure**, such as traversals of arrays, linked lists, trees, and graphs, etc.
|
||||
- **Using the organizational structure of the data or the prior information contained in the data to achieve efficient element search**, such as binary search, hash search, and binary search tree search, etc.
|
||||
|
||||
It is not difficult to notice that these topics have been introduced in previous chapters, so searching algorithms are not unfamiliar to us. In this section, we will revisit searching algorithms from a more systematic perspective.
|
||||
|
||||
## 10.5.1 Brute-force search
|
||||
|
||||
Brute-force search locates the target element by traversing every element of the data structure.
|
||||
|
||||
- "Linear search" is suitable for linear data structures such as arrays and linked lists. It starts from one end of the data structure, accesses each element one by one, until the target element is found or the other end is reached without finding the target element.
|
||||
- "Breadth-first search" and "Depth-first search" are two traversal strategies for graphs and trees. Breadth-first search starts from the initial node and searches layer by layer, accessing nodes from near to far. Depth-first search starts from the initial node, follows a path until the end, then backtracks and tries other paths until the entire data structure is traversed.
|
||||
|
||||
The advantage of brute-force search is its simplicity and versatility, **no need for data preprocessing and the help of additional data structures**.
|
||||
|
||||
However, **the time complexity of this type of algorithm is $O(n)$**, where $n$ is the number of elements, so the performance is poor in cases of large data volumes.
|
||||
|
||||
## 10.5.2 Adaptive search
|
||||
|
||||
Adaptive search uses the unique properties of data (such as order) to optimize the search process, thereby locating the target element more efficiently.
|
||||
|
||||
- "Binary search" uses the orderliness of data to achieve efficient searching, only suitable for arrays.
|
||||
- "Hash search" uses a hash table to establish a key-value mapping between search data and target data, thus implementing the query operation.
|
||||
- "Tree search" in a specific tree structure (such as a binary search tree), quickly eliminates nodes based on node value comparisons, thus locating the target element.
|
||||
|
||||
The advantage of these algorithms is high efficiency, **with time complexities reaching $O(\log n)$ or even $O(1)$**.
|
||||
|
||||
However, **using these algorithms often requires data preprocessing**. For example, binary search requires sorting the array in advance, and hash search and tree search both require the help of additional data structures, maintaining these structures also requires extra time and space overhead.
|
||||
|
||||
!!! tip
|
||||
|
||||
Adaptive search algorithms are often referred to as search algorithms, **mainly used for quickly retrieving target elements in specific data structures**.
|
||||
|
||||
## 10.5.3 Choosing a search method
|
||||
|
||||
Given a set of data of size $n$, we can use linear search, binary search, tree search, hash search, and other methods to search for the target element from it. The working principles of these methods are shown in the following figure.
|
||||
|
||||
{ class="animation-figure" }
|
||||
|
||||
<p align="center"> Figure 10-11 Various search strategies </p>
|
||||
|
||||
The operation efficiency and characteristics of the aforementioned methods are shown in the following table.
|
||||
|
||||
<p align="center"> Table 10-1 Comparison of search algorithm efficiency </p>
|
||||
|
||||
<div class="center-table" markdown>
|
||||
|
||||
| | Linear search | Binary search | Tree search | Hash search |
|
||||
| ------------------ | ------------- | --------------------- | --------------------------- | -------------------------- |
|
||||
| Search element | $O(n)$ | $O(\log n)$ | $O(\log n)$ | $O(1)$ |
|
||||
| Insert element | $O(1)$ | $O(n)$ | $O(\log n)$ | $O(1)$ |
|
||||
| Delete element | $O(n)$ | $O(n)$ | $O(\log n)$ | $O(1)$ |
|
||||
| Extra space | $O(1)$ | $O(1)$ | $O(n)$ | $O(n)$ |
|
||||
| Data preprocessing | / | Sorting $O(n \log n)$ | Building tree $O(n \log n)$ | Building hash table $O(n)$ |
|
||||
| Data orderliness | Unordered | Ordered | Ordered | Unordered |
|
||||
|
||||
</div>
|
||||
|
||||
The choice of search algorithm also depends on the volume of data, search performance requirements, data query and update frequency, etc.
|
||||
|
||||
**Linear search**
|
||||
|
||||
- Good versatility, no need for any data preprocessing operations. If we only need to query the data once, then the time for data preprocessing in the other three methods would be longer than the time for linear search.
|
||||
- Suitable for small volumes of data, where time complexity has a smaller impact on efficiency.
|
||||
- Suitable for scenarios with high data update frequency, because this method does not require any additional maintenance of the data.
|
||||
|
||||
**Binary search**
|
||||
|
||||
- Suitable for large data volumes, with stable efficiency performance, the worst time complexity being $O(\log n)$.
|
||||
- The data volume cannot be too large, because storing arrays requires contiguous memory space.
|
||||
- Not suitable for scenarios with frequent additions and deletions, because maintaining an ordered array incurs high overhead.
|
||||
|
||||
**Hash search**
|
||||
|
||||
- Suitable for scenarios with high query performance requirements, with an average time complexity of $O(1)$.
|
||||
- Not suitable for scenarios needing ordered data or range searches, because hash tables cannot maintain data orderliness.
|
||||
- High dependency on hash functions and hash collision handling strategies, with significant performance degradation risks.
|
||||
- Not suitable for overly large data volumes, because hash tables need extra space to minimize collisions and provide good query performance.
|
||||
|
||||
**Tree search**
|
||||
|
||||
- Suitable for massive data, because tree nodes are stored scattered in memory.
|
||||
- Suitable for maintaining ordered data or range searches.
|
||||
- In the continuous addition and deletion of nodes, the binary search tree may become skewed, degrading the time complexity to $O(n)$.
|
||||
- If using AVL trees or red-black trees, operations can run stably at $O(\log n)$ efficiency, but the operation to maintain tree balance adds extra overhead.
|
||||
@@ -0,0 +1,12 @@
|
||||
---
|
||||
comments: true
|
||||
---
|
||||
|
||||
# 10.6 Summary
|
||||
|
||||
- Binary search depends on the order of data and performs the search by iteratively halving the search interval. It requires the input data to be sorted and is only applicable to arrays or array-based data structures.
|
||||
- Brute force search locates data by traversing the data structure. Linear search is suitable for arrays and linked lists, while breadth-first search and depth-first search are suitable for graphs and trees. These algorithms are highly versatile, requiring no preprocessing of data, but have a higher time complexity of $O(n)$.
|
||||
- Hash search, tree search, and binary search are efficient searching methods, capable of quickly locating target elements in specific data structures. These algorithms are highly efficient, with time complexities reaching $O(\log n)$ or even $O(1)$, but they usually require additional data structures.
|
||||
- In practice, we need to analyze factors such as data volume, search performance requirements, data query and update frequencies, etc., to choose the appropriate search method.
|
||||
- Linear search is suitable for small or frequently updated data; binary search is suitable for large, sorted data; hash search is suitable for scenarios requiring high query efficiency without the need for range queries; tree search is appropriate for large dynamic data that needs to maintain order and support range queries.
|
||||
- Replacing linear search with hash search is a common strategy to optimize runtime, reducing the time complexity from $O(n)$ to $O(1)$.
|
||||
Reference in New Issue
Block a user