feat: disable channel when account_deactivated received (close #271)

* chore: 优化翻译

* Update en.json

README.md

@@ -51,7 +51,7 @@ _✨ All in one 的 OpenAI 接口，整合各种 API 访问方式，开箱即用
   <a href="https://iamazing.cn/page/reward">赞赏支持</a>
 </p>
 
-> **Note**：本项目为开源项目，请在遵循 OpenAI 的[使用条款](https://openai.com/policies/terms-of-use)以及**法律法规**的情况下使用，不得用于非法用途。
+> **Note**：本项目为开源项目，使用者必须在遵循 OpenAI 的[使用条款](https://openai.com/policies/terms-of-use)以及**法律法规**的情况下使用，不得用于非法用途。
 
 > **Note**：使用 Docker 拉取的最新镜像可能是 `alpha` 版本，如果追求稳定性请手动指定版本。
 
@@ -189,7 +189,7 @@ sudo service nginx restart
 docker run --name chat-next-web -d -p 3001:3000 yidadaa/chatgpt-next-web
 ```
 
-注意修改端口号和 `BASE_URL`。
+注意修改端口号，之后在页面上设置接口地址（例如：https://openai.justsong.cn/ ）和 API Key 即可。
 
 #### ChatGPT Web
 项目主页：https://github.com/Chanzhaoyu/chatgpt-web

controller/relay-text.go

@@ -151,7 +151,7 @@ func relayTextHelper(c *gin.Context, relayMode int) *OpenAIErrorWithStatusCode {
 	}
 	req.Header.Set("Content-Type", c.Request.Header.Get("Content-Type"))
 	req.Header.Set("Accept", c.Request.Header.Get("Accept"))
-	req.Header.Set("Connection", c.Request.Header.Get("Connection"))
+	//req.Header.Set("Connection", c.Request.Header.Get("Connection"))
 	client := &http.Client{}
 	resp, err := client.Do(req)
 	if err != nil {

controller/relay.go

@@ -124,7 +124,7 @@ func Relay(c *gin.Context) {
 		channelId := c.GetInt("channel_id")
 		common.SysError(fmt.Sprintf("relay error (channel #%d): %s", channelId, err.Message))
 		// https://platform.openai.com/docs/guides/error-codes/api-errors
-		if common.AutomaticDisableChannelEnabled && (err.Type == "insufficient_quota" || err.Code == "invalid_api_key") {
+		if common.AutomaticDisableChannelEnabled && (err.Type == "insufficient_quota" || err.Code == "invalid_api_key" || err.Code == "account_deactivated") {
 			channelId := c.GetInt("channel_id")
 			channelName := c.GetString("channel_name")
 			disableChannel(channelId, channelName, err.Message)

i18n/en.json

@@ -107,6 +107,11 @@
   "已禁用": "Disabled",
   "未知状态": "Unknown status",
   " 秒": "s",
+  " 分钟 ": " m ",
+  " 小时 ": " h ",
+  " 天 ": " d ",
+  " 个月 ": " M ",
+  " 年 ": " y ",
   "未测试": "Not tested",
   "通道 ${name} 测试成功，耗时 ${time.toFixed(2)} 秒。": "Channel ${name} test succeeded, time consumed ${time.toFixed(2)} s.",
   "已成功开始测试所有已启用通道，请刷新页面查看结果。": "All enabled channels have been successfully tested, please refresh the page to view the results.",
@@ -458,5 +463,45 @@
   "消耗额度": "Used Quota",
   "可选值": "Optional Values",
   "渠道不存在：%d": "Channel does not exist: %d",
-  "数据库一致性已被破坏，请联系管理员": "Database consistency has been broken, please contact the administrator"
+  "数据库一致性已被破坏，请联系管理员": "Database consistency has been broken, please contact the administrator",
+  "使用近似的方式估算 token 数以减少计算量": "Estimate the number of tokens in an approximate way to reduce computational load",
+  "请填写ChannelName和ChannelKey！": "Please fill in the ChannelName and ChannelKey!",
+  "请至少选择一个Model！": "Please select at least one Model!",
+  "加载首页内容失败": "Failed to load the homepage content",
+  "加载关于内容失败": "Failed to load the About content",
+  "兑换码更新成功！": "Redemption code updated successfully!",
+  "兑换码创建成功！": "Redemption code created successfully!",
+  "用户账户创建成功！": "User account created successfully!",
+  "生成数量": "Generate quantity",
+  "请输入生成数量": "Please enter the quantity to generate",
+  "创建新用户账户": "Create new user account",
+  "渠道更新成功！": "Channel updated successfully!",
+  "渠道创建成功！": "Channel created successfully!",
+  "请选择分组": "Please select a group",
+  "更新兑换码信息": "Update redemption code information",
+  "创建新的兑换码": "Create a new redemption code",
+  "请在系统设置页面编辑分组倍率以添加新的分组：": "Please edit the group ratio in the system settings page to add a new group:",
+  "未找到所请求的页面": "The requested page was not found",
+  "过期时间格式错误！": "Expiration time format error!",
+  "请输入过期时间，格式为 yyyy-MM-dd HH:mm:ss，-1 表示无限制": "Please enter the expiration time, the format is yyyy-MM-dd HH:mm:ss, -1 means no limit",
+  "此项可选，为一个 JSON 文本，键为用户请求的模型名称，值为要替换的模型名称，例如：": "This is optional, it's a JSON text, the key is the model name requested by the user, and the value is the model name to be replaced, for example:",
+  "此项可选，输入镜像站地址，格式为：": "This is optional, enter the mirror site address, the format is:",
+  "模型映射": "Model mapping",
+  "请输入默认 API 版本，例如：2023-03-15-preview，该配置可以被实际的请求查询参数所覆盖": "Please enter the default API version, for example: 2023-03-15-preview, this configuration can be overridden by the actual request query parameters",
+  "默认": "Default",
+  "图片演示": "Image demo",
+  "参数替换为你的部署名称（模型名称中的点会被剔除）": "Replace the parameter with your deployment name (dots in the model name will be removed)",
+  "模型映射必须是合法的 JSON 格式！": "Model mapping must be in valid JSON format!",
+  "取消无限额度": "Cancel unlimited quota",
+  "请输入新的剩余额度": "Please enter the new remaining quota",
+  "请输入单个兑换码中包含的额度": "Please enter the quota included in a single redemption code",
+  "请输入用户名": "Please enter username",
+  "请输入显示名称": "Please enter display name",
+  "请输入密码": "Please enter password",
+  "模型部署名称必须和模型名称保持一致": "The model deployment name must be consistent with the model name",
+  "，因为 One API 会把请求体中的 model": ", because One API will take the model in the request body",
+  "请输入 AZURE_OPENAI_ENDPOINT": "Please enter AZURE_OPENAI_ENDPOINT",
+  "请输入自定义渠道的 Base URL": "Please enter the Base URL of the custom channel",
+  "Homepage URL 填": "Fill in the Homepage URL",
+  "Authorization callback URL 填": "Fill in the Authorization callback URL"
 }

model/redemption.go

@@ -3,6 +3,7 @@ package model
 import (
 	"errors"
 	"fmt"
+	"gorm.io/gorm"
 	"one-api/common"
 )
 
@@ -48,26 +49,27 @@ func Redeem(key string, userId int) (quota int, err error) {
 		return 0, errors.New("无效的 user id")
 	}
 	redemption := &Redemption{}
-	err = DB.Where("`key` = ?", key).First(redemption).Error
-	if err != nil {
-		return 0, errors.New("无效的兑换码")
-	}
-	if redemption.Status != common.RedemptionCodeStatusEnabled {
-		return 0, errors.New("该兑换码已被使用")
-	}
-	err = IncreaseUserQuota(userId, redemption.Quota)
-	if err != nil {
-		return 0, err
-	}
-	go func() {
+
+	err = DB.Transaction(func(tx *gorm.DB) error {
+		err := DB.Where("`key` = ?", key).First(redemption).Error
+		if err != nil {
+			return errors.New("无效的兑换码")
+		}
+		if redemption.Status != common.RedemptionCodeStatusEnabled {
+			return errors.New("该兑换码已被使用")
+		}
+		err = DB.Model(&User{}).Where("id = ?", userId).Update("quota", gorm.Expr("quota + ?", redemption.Quota)).Error
+		if err != nil {
+			return err
+		}
 		redemption.RedeemedTime = common.GetTimestamp()
 		redemption.Status = common.RedemptionCodeStatusUsed
-		err := redemption.SelectUpdate()
-		if err != nil {
-			common.SysError("failed to update redemption status: " + err.Error())
-		}
-		RecordLog(userId, LogTypeTopup, fmt.Sprintf("通过兑换码充值 %s", common.LogQuota(redemption.Quota)))
-	}()
+		return redemption.SelectUpdate()
+	})
+	if err != nil {
+		return 0, errors.New("兑换失败，" + err.Error())
+	}
+	RecordLog(userId, LogTypeTopup, fmt.Sprintf("通过兑换码充值 %s", common.LogQuota(redemption.Quota)))
 	return redemption.Quota, nil
 }
 

web/src/components/UsersTable.js

@@ -226,6 +226,7 @@ const UsersTable = () => {
                     <Popup
                       content={user.email ? user.email : '未绑定邮箱地址'}
                       key={user.username}
+                      header={user.display_name ? user.display_name : user.username}
                       trigger={<span>{renderText(user.username, 10)}</span>}
                       hoverable
                     />