Files
3x-ui/internal/web/service/port_conflict.go
T
BlindMaster24 bf08e1a2fe fix(amneziawg): refuse a WireGuard port that is the row's own relay port
All three relay checks filter themselves out of the candidates with id !=
ignoreId, so nothing ever compared an AmneziaWG row's own WireGuard listen port
with the relay port its own id derives. Saving a row on that exact port left the
embedded device (UDP on the inbound's listen address, amneziawgnet/device.go:137)
and its injected relay (TCP and UDP on 127.0.0.1, amneziawgnet/relay.go:47-61)
bound to the same UDP port, so whichever loses the race dies -- and when the
relay loses it, Xray refuses the whole config and takes every other protocol on
the host with it. The first AmneziaWG inbound on port 65101 was enough to reach
it: id 1 derives exactly that port.

The row now states the rule its three siblings do: it owns the slot its id
derives. A node-hosted row still keeps its own port, since it binds no relay on
this host.

TestAddInbound_AmneziawgRefusesItsOwnRelayPort and
TestUpdateInbound_AmneziawgRefusesItsOwnRelayPort fail without this -- both were
watched red first -- and pin the two separate call sites, AddInbound's post-Save
block and checkPortConflictTx's ignoreId > 0 block.
2026-09-15 12:31:44 +03:00

483 lines
14 KiB
Go

package service
import (
"encoding/json"
"fmt"
"strings"
"github.com/mhsanaei/3x-ui/v3/internal/amneziawgnet"
"github.com/mhsanaei/3x-ui/v3/internal/database"
"github.com/mhsanaei/3x-ui/v3/internal/database/model"
"github.com/mhsanaei/3x-ui/v3/internal/util/common"
"gorm.io/gorm"
)
type transportBits uint8
const (
transportTCP transportBits = 1 << iota
transportUDP
)
func inboundTransports(protocol model.Protocol, streamSettings, settings string) transportBits {
// protocols that ignore streamSettings entirely.
switch protocol {
case model.Hysteria, model.WireGuard, model.AmneziaWG, model.TUIC:
return transportUDP
case model.MTProto:
return transportTCP
}
var bits transportBits
// peek at streamSettings.network to spot udp-based transports.
// parse errors are non-fatal: missing or weird streamSettings just
// keeps the default tcp bit below.
network := ""
if streamSettings != "" {
var ss map[string]any
if json.Unmarshal([]byte(streamSettings), &ss) == nil {
if n, _ := ss["network"].(string); n != "" {
network = n
}
}
}
switch network {
case "kcp", "quic":
bits |= transportUDP
default:
bits |= transportTCP
}
// a few protocols carry their L4 choice in settings instead of (or in
// addition to) streamSettings: SS / Tunnel via a CSV field that wins
// outright, Mixed via an additive udp boolean.
if settings != "" {
var st map[string]any
if json.Unmarshal([]byte(settings), &st) == nil {
switch protocol {
case model.Shadowsocks, model.Tunnel:
key := "network"
if protocol == model.Tunnel {
key = "allowedNetwork"
}
if n, ok := st[key].(string); ok && n != "" {
bits = 0
for part := range strings.SplitSeq(n, ",") {
switch strings.TrimSpace(part) {
case "tcp":
bits |= transportTCP
case "udp":
bits |= transportUDP
}
}
}
case model.Mixed:
// socks/http "mixed" inbound: settings.udp=true means it
// also relays udp on the same port (socks5 udp associate).
if udpOn, _ := st["udp"].(bool); udpOn {
bits |= transportUDP
}
}
}
}
// safety net: never return zero, even if every parse failed.
if bits == 0 {
bits = transportTCP
}
return bits
}
func listenOverlaps(a, b string) bool {
if isAnyListen(a) || isAnyListen(b) {
return true
}
return a == b
}
func isAnyListen(s string) bool {
return s == "" || s == "0.0.0.0" || s == "::" || s == "::0"
}
type portConflictDetail struct {
InboundID int
Remark string
Tag string
Listen string
Port int
// Relay marks Port as an automatic loopback relay port, not a configured one.
Relay bool
Transports transportBits
}
// String renders the detail as a single-line, user-facing summary.
func (d *portConflictDetail) String() string {
name := d.Remark
if name == "" {
name = d.Tag
}
if name == "" {
name = fmt.Sprintf("#%d", d.InboundID)
} else if d.InboundID > 0 {
name = fmt.Sprintf("'%s' (#%d)", name, d.InboundID)
} else {
// reserved/system inbounds (e.g. the Xray API) have no DB id.
name = fmt.Sprintf("'%s'", name)
}
listen := d.Listen
if isAnyListen(listen) {
listen = "*"
}
port := fmt.Sprintf("port %d", d.Port)
if d.Relay {
port = fmt.Sprintf("relay port %d", d.Port)
}
return fmt.Sprintf("%s (%s) already used by inbound %s on %s",
port, transportTagSuffix(d.Transports), name, listen)
}
// defaultXrayAPIPort is the loopback port of the internal Xray API inbound
// (tag "api") seeded into the config template. Used as a fallback when the
// template can't be parsed.
const defaultXrayAPIPort = 62789
// reservedAPIPort returns the port of the internal Xray API inbound declared
// in the config template, falling back to defaultXrayAPIPort.
func reservedAPIPort() int {
tmpl, err := (&SettingService{}).GetXrayConfigTemplate()
if err != nil || tmpl == "" {
return defaultXrayAPIPort
}
var parsed struct {
Inbounds []struct {
Port int `json:"port"`
Tag string `json:"tag"`
} `json:"inbounds"`
}
if json.Unmarshal([]byte(tmpl), &parsed) != nil {
return defaultXrayAPIPort
}
for _, in := range parsed.Inbounds {
if in.Tag == "api" && in.Port > 0 {
return in.Port
}
}
return defaultXrayAPIPort
}
// checkPortConflict reads outside any transaction; callers that must not race a
// concurrent create use checkPortConflictTx inside their own transaction.
func (s *InboundService) checkPortConflict(inbound *model.Inbound, ignoreId int) (*portConflictDetail, error) {
return checkPortConflictTx(database.GetDB(), inbound, ignoreId)
}
func checkPortConflictTx(db *gorm.DB, inbound *model.Inbound, ignoreId int) (*portConflictDetail, error) {
newBits := inboundTransports(inbound.Protocol, inbound.StreamSettings, inbound.Settings)
// The internal Xray API inbound (tag "api", loopback TCP) isn't a DB row,
// so a local user inbound reusing its port would leave Xray binding the
// port twice (#5304). Nodes run their own Xray, so this only applies to
// the local panel.
if inbound.NodeID == nil && inbound.Port == reservedAPIPort() &&
newBits&transportTCP != 0 && listenOverlaps("127.0.0.1", inbound.Listen) {
return &portConflictDetail{
Tag: "api",
Listen: "127.0.0.1",
Port: inbound.Port,
Transports: transportTCP,
}, nil
}
// Egress SOCKS server holds loopback EgressBasePort when AWG outbounds are
// active; conflict check prevents inbounds from colliding with it.
if inbound.NodeID == nil && inbound.Port == int(amneziawgnet.EgressBasePort) &&
newBits&transportTCP != 0 && listenOverlaps("127.0.0.1", inbound.Listen) {
return &portConflictDetail{
Tag: "amneziawg-egress",
Listen: "127.0.0.1",
Port: inbound.Port,
Transports: transportTCP,
}, nil
}
// Every enabled local AmneziaWG inbound gets its own automatic Xray
// SOCKS5 relay inbound (see injectAmneziawgnetSocks) on 127.0.0.1 at a
// port derived purely from its id (amneziawgnet.SOCKSPortForInbound) --
// like the internal Xray API inbound above, that relay inbound is not
// itself a database row, so the ordinary DB-backed query below can never
// see it. Without this check, an unrelated inbound saved onto that exact
// port silently fails at the next Xray start, taking every other
// protocol down with it, not just AmneziaWG.
if inbound.NodeID == nil && listenOverlaps("127.0.0.1", inbound.Listen) {
conflict, err := checkAmneziawgnetSocksConflict(db, inbound, ignoreId, newBits)
if err != nil {
return nil, err
}
if conflict != nil {
return conflict, nil
}
}
// The reverse direction, only meaningful once the id is known -- AddInbound
// runs it after Save. Only a local row owns a relay slot (#6537 review).
if inbound.NodeID == nil && inbound.Protocol == model.AmneziaWG && ignoreId > 0 {
if self := amneziawgnetSocksSelfConflict(inbound, ignoreId); self != "" {
return nil, common.NewError(self)
}
conflict, err := checkAmneziawgnetSocksRelayCollision(db, ignoreId)
if err != nil {
return nil, err
}
if conflict != nil {
return conflict, nil
}
conflict, err = checkAmneziawgnetSocksReverseConflict(db, ignoreId)
if err != nil {
return nil, err
}
if conflict != nil {
return conflict, nil
}
}
var candidates []*model.Inbound
q := db.Model(model.Inbound{}).Where("port = ?", inbound.Port)
if ignoreId > 0 {
q = q.Where("id != ?", ignoreId)
}
if err := q.Find(&candidates).Error; err != nil {
return nil, err
}
for _, c := range candidates {
if !sameNode(c.NodeID, inbound.NodeID) {
continue
}
if !listenOverlaps(c.Listen, inbound.Listen) {
continue
}
existingBits := inboundTransports(c.Protocol, c.StreamSettings, c.Settings)
shared := existingBits & newBits
if shared == 0 {
continue
}
return &portConflictDetail{
InboundID: c.Id,
Remark: c.Remark,
Tag: c.Tag,
Listen: c.Listen,
Port: c.Port,
Transports: shared,
}, nil
}
return nil, nil
}
// checkAmneziawgnetSocksConflict: inbound's port vs the relay port every matching
// local row reserves, emitted or not; db keeps it in the caller's transaction (#6225).
func checkAmneziawgnetSocksConflict(db *gorm.DB, inbound *model.Inbound, ignoreId int, newBits transportBits) (*portConflictDetail, error) {
// A disabled row still owns the slot its id derives: SetInboundEnable flips
// the column with no port check, so enabling it later must not collide.
var candidates []*model.Inbound
q := db.Model(model.Inbound{}).Where("protocol = ? AND node_id IS NULL", model.AmneziaWG)
if ignoreId > 0 {
q = q.Where("id != ?", ignoreId)
}
if err := q.Find(&candidates).Error; err != nil {
return nil, err
}
// Ownership does not depend on the peers: the relay appears when the first
// client is added, and the client paths run no port check at all.
for _, c := range candidates {
if amneziawgnet.SOCKSPortForInbound(c.Id) != inbound.Port {
continue
}
return &portConflictDetail{
InboundID: c.Id,
Remark: c.Remark,
Tag: c.Tag,
Listen: "127.0.0.1",
Port: inbound.Port,
Transports: newBits,
}, nil
}
return nil, nil
}
// checkAmneziawgnetSocksRelayCollision reports whether id's derived relay port
// is already claimed by another local AmneziaWG inbound, disabled rows included.
func checkAmneziawgnetSocksRelayCollision(db *gorm.DB, id int) (*portConflictDetail, error) {
relayPort := amneziawgnet.SOCKSPortForInbound(id)
var candidates []*model.Inbound
if err := db.Model(model.Inbound{}).
Where("protocol = ? AND node_id IS NULL AND id != ?", model.AmneziaWG, id).
Find(&candidates).Error; err != nil {
return nil, err
}
for _, c := range candidates {
if amneziawgnet.SOCKSPortForInbound(c.Id) != relayPort {
continue
}
return &portConflictDetail{
InboundID: c.Id,
Remark: c.Remark,
Tag: c.Tag,
Listen: "127.0.0.1",
Port: relayPort,
Relay: true,
Transports: transportTCP,
}, nil
}
return nil, nil
}
// amneziawgnetSocksSelfConflict: a row's own WireGuard port vs the relay port its
// own id derives -- all three checks below exclude that id, so nothing else does.
func amneziawgnetSocksSelfConflict(inbound *model.Inbound, id int) string {
if id <= 0 || inbound.NodeID != nil || !listenOverlaps("127.0.0.1", inbound.Listen) {
return ""
}
relayPort := amneziawgnet.SOCKSPortForInbound(id)
if inbound.Port != relayPort {
return ""
}
return fmt.Sprintf("WireGuard port %d is inbound #%d's own SOCKS5 relay port on 127.0.0.1; choose a different WireGuard port",
relayPort, id)
}
// checkAmneziawgnetSocksReverseConflict mirrors checkAmneziawgnetSocksConflict:
// does id's own derived relay port collide with some other inbound's port.
func checkAmneziawgnetSocksReverseConflict(db *gorm.DB, id int) (*portConflictDetail, error) {
relayPort := amneziawgnet.SOCKSPortForInbound(id)
var candidates []*model.Inbound
if err := db.Model(model.Inbound{}).
Where("port = ? AND node_id IS NULL AND id != ?", relayPort, id).
Find(&candidates).Error; err != nil {
return nil, err
}
for _, c := range candidates {
if !listenOverlaps("127.0.0.1", c.Listen) {
continue
}
return &portConflictDetail{
InboundID: c.Id,
Remark: c.Remark,
Tag: c.Tag,
Listen: c.Listen,
Port: relayPort,
Relay: true,
Transports: transportTCP,
}, nil
}
return nil, nil
}
func sameNode(a, b *int) bool {
if a == nil && b == nil {
return true
}
if a == nil || b == nil {
return false
}
return *a == *b
}
func baseInboundTag(port int) string {
return fmt.Sprintf("in-%v", port)
}
func transportTagSuffix(b transportBits) string {
switch b {
case transportTCP:
return "tcp"
case transportUDP:
return "udp"
case transportTCP | transportUDP:
return "tcpudp"
}
return "any"
}
// nodeTagPrefix scopes a tag to one remote node so the same listen+port
// can live on the central panel and on a node without bumping the global
// UNIQUE(inbounds.tag) constraint. nil → "" (local panel).
func nodeTagPrefix(nodeID *int) string {
if nodeID == nil {
return ""
}
return fmt.Sprintf("n%d-", *nodeID)
}
func composeInboundTag(port int, nodeID *int, bits transportBits) string {
return nodeTagPrefix(nodeID) + baseInboundTag(port) + "-" + transportTagSuffix(bits)
}
func isAutoGeneratedTag(tag string, port int, nodeID *int, bits transportBits) bool {
base := composeInboundTag(port, nodeID, bits)
if tag == base {
return true
}
suffix, ok := strings.CutPrefix(tag, base+"-")
if !ok || suffix == "" {
return false
}
for _, r := range suffix {
if r < '0' || r > '9' {
return false
}
}
return true
}
func (s *InboundService) generateInboundTag(inbound *model.Inbound, ignoreId int) (string, error) {
bits := inboundTransports(inbound.Protocol, inbound.StreamSettings, inbound.Settings)
candidate := composeInboundTag(inbound.Port, inbound.NodeID, bits)
exists, err := s.tagExists(candidate, ignoreId)
if err != nil {
return "", err
}
if !exists {
return candidate, nil
}
for i := 2; i < 100; i++ {
c := fmt.Sprintf("%s-%d", candidate, i)
exists, err = s.tagExists(c, ignoreId)
if err != nil {
return "", err
}
if !exists {
return c, nil
}
}
return "", common.NewError("could not pick a unique inbound tag for port:", inbound.Port)
}
func (s *InboundService) resolveInboundTag(inbound *model.Inbound, ignoreId int) (string, error) {
if inbound.Tag != "" {
taken, err := s.tagExists(inbound.Tag, ignoreId)
if err != nil {
return "", err
}
if !taken {
return inbound.Tag, nil
}
}
return s.generateInboundTag(inbound, ignoreId)
}
func (s *InboundService) tagExists(tag string, ignoreId int) (bool, error) {
db := database.GetDB()
q := db.Model(model.Inbound{}).Where("tag = ?", tag)
if ignoreId > 0 {
q = q.Where("id != ?", ignoreId)
}
var count int64
if err := q.Count(&count).Error; err != nil {
return false, err
}
return count > 0, nil
}